Heck catalyst, formation

The retentions of the catalysts were also measured on a synthetic reaction mixture. The Heck-catalyst showed a retention of 96% while under experimental conditions retentions lower than 90% were obtained. For the PTC the values are both higher than 99%. The authors assume that this big difference for the Heck-catalyst is caused by the formation of smaller Pd species in the catalytic cycle. However, no precipitation or Pd-black formation was observed. 

The mechanism of the Heck reaction is divided into two stages formation of the Heck catalyst and the catalytic cycle. As you study the catalytic cycle, note in particular that both Steps 2 and 4 are syn stereoselective reaction will not proceed if these syn relationships cannot be obtained. Step 2 involves syn addition of R and PdL2X to... 

The ease of formation of the carbene depends on the nucleophilicity of the anion associated with the imidazolium. For example, when Pd(OAc)2 is heated in the presence of [BMIM][Br], the formation of a mixture of Pd imidazolylidene complexes occurs. Palladium complexes have been shown to be active and stable catalysts for Heck and other C-C coupling reactions [34]. The highest activity and stability of palladium is observed in the ionic liquid [BMIM][Brj. Carbene complexes can be formed not only by deprotonation of the imidazolium cation but also by direct oxidative addition to metal(O) (Scheme 5.3-3). These heterocyclic carbene ligands can be functionalized with polar groups in order to increase their affinity for ionic liquids. While their donor properties can be compared to those of donor phosphines, they have the advantage over phosphines of being stable toward oxidation. 

Carbon-carbon bond formation reactions and the CH activation of methane are another example where NHC complexes have been used successfully in catalytic applications. Palladium-catalysed reactions include Heck-type reactions, especially the Mizoroki-Heck reaction itself [171-175], and various cross-coupling reactions [176-182]. They have also been found useful for related reactions like the Sonogashira coupling [183-185] or the Buchwald-Hartwig amination [186-189]. The reactions are similar concerning the first step of the catalytic cycle, the oxidative addition of aryl halides to palladium(O) species. This is facilitated by electron-donating substituents and therefore the development of highly active catalysts has focussed on NHC complexes. 

An interesting parallel was found while the microwave-enhanced Heck reaction was explored on the C-3 position of the pyrazinone system [29]. The additional problem here was caused by the capability of the alkene to undergo Diels-Alder reaction with the 2-azadiene system of the pyrazinone. An interesting competition between the Heck reaction and the Diels-Alder reaction has been noticed, while the outcome solely depended on the substrates and the catalyst system. Microwave irradiation of a mixture of pyrazinone (Re = H), ethyl acrylate (Y = COOEt) and Pd(dppf)Cl2 resulted in the formation of a mixture of the starting material together with the cycloaddition product in a 3 1 ratio (Scheme 15). On the contrary, when Pd(OAc)2 was used in combination with the bulky phosphine ligand 2-(di-t-butylphosphino)biphenyl [41-44], the Heck reaction product was obtained as the sole product. When a mixture of the pyrazinone (Re = Ar) with ethyl acrylate or styrene and Pd(dppf)Cl2 was irradiated at 150 °C for 15 min, both catalytic systems favored the Heck reaction product with no trace of Diels-Alder adduct. 

The Pd-catalysed Heck reaction performed with thiourea as the Ugand exhibit good activities for some catalysts. As for carbene ligands [104], steric hindrance improves catalytic results. Thus, thioureas wearing bulky substituents afford the formation of air- and moisture-stable Pd complexes [105]. For example, the catalyst obtained with 2mol% Pd(dba)2 and Ar,M -dimesitylene-ethylene thiourea (Scheme 24) was still active even after 2 months in an air atmosphere. 

Reaction of organic halides with alkenes catalyzed by palladium compounds (Heck-type reaction) is known to be a useful method for carbon-carbon bond formation at unsubstituted vinyl positions. The first report on the application of microwave methodology to this type of reaction was published by Hallberg et al. in 1996 [86], Recently, the palladium catalyzed Heck coupling reaction induced by microwave irradiation was reported under solventless liquid-liquid phase-transfer catalytic conditions in the presence of potassium carbonate and a small amount of [Pd(PPh3)2Cl2]-TBAB as a catalyst [87]. The arylation of alkenes with aryl iodides proceeded smoothly to afford exclusively trans product in high yields (86-93%) (Eq. 61). 

Palladium catalyzed reaction of aryl halides and olefins provide a useful synthetic method for C-C bond formation reaction [171, 172], The commonly used catalyst is palladium acetate, although other palladium complexes have also been used. A sol-vent-free Heck reaction has been conducted in excellent yields using a household MW oven and palladium acetate as catalyst and triethylamine as base (Scheme 6.51) [173], A comparative study revealed that the longer reaction times and deployment of high pressures, typical of classical heating method, are avoided using this MW procedure. 

A heterogeneous Pd catalyst dispersed on supports such as o-A1203, C, MgO and CaC03 was found to be an recyclable and selective catalyst for heterogeneous Heck arylation (an important method of C-C bond formation - Chapt. 11) of several olefins (styrene, a-methylstyrene, 1-decene, acrylonitrile, etc.) with iodobenzene [45], Scheme 10.5. 

Metal-catalyzed cross-couplings are key transformations for carbon-carbon bond formation. The applicability of continuous-flow systems to this important reaction type has been shown by a Heck reaction carried out in a stainless steel microreactor system (Snyder et al. 2005). A solution of phenyliodide 5 and ethyl acrylate 6 was passed through a solid-phase cartridge reactor loaded with 10% palladium on charcoal (Scheme 2). The process was conducted with a residence time of 30 min at 130°C, giving the desired ethyl cinnamate 7 in 95% isolated yield. The batch process resulted in 100% conversion after 30 min at 140°C using a preconditioned catalyst. 

Rhodium(i) complexes are excellent catalysts for the 1,4-addition of aryl- or 1-alkenylboron, -silicon, and -tin compounds to a,/3-unsaturated carbonyl compounds. In contrast, there are few reports on the palladium(n) complex-catalyzed 1,4-addition to enones126,126a for the easy formation of C-bound enolate, which will result in /3-hydride elimination product of Heck reaction. Previously, Cacchi et al. described the palladium(n)-catalyzed Michael addition of ArHgCl or SnAr4 to enones in acidic water.127 Recently, Miyaura and co-workers reported the 1,4-addition of arylboronic acids and boroxines to a,/3-unsaturated carbonyl compounds. A cationic palladium(n) complex [Pd(dppe)(PhCN)2](SbF6)2 was found to be an excellent catalyst for this reaction (dppe = l,2-bis(diphenyl-phosphine)ethane Scheme 42).128... 

---