Hazards skin contact

An area where respiratory protection may need to be used is when floorhands are mixing chemicals into the drilling fluid at the mud hopper. When handling hazardous substances, respiratory, skin, eye, and face protection may need to be worn due to the high potential for exposure to inhalation hazards, skin contact, absorption, and other hazards. 

Exposure to PTFE can arise from ingestion, skin contact, or inhalation. The polymer has no irritating effect to the skin, and test animals fed with the sintered polymer have not shown adverse reactions. Dust generated by grinding the resin also has no effect on test animals. Formation of toxic products is unlikely. Only the heated polymer is a source of a possible health hazard (120). 

Health nd Safety Factors. Isophorone is considered moderately toxic by ingestion and skin contact. Some rat tumor formation evidence has been found (264), but no demonstration as a human carcinogen has been proven. Isophorone is considered an Environmental Protection Agency (EPA) priority pollutant, and has a permissible acute toxicity concentration of 117, 000 ///L to protect freshwater aquatic life, 12, 900 ///L to protect saltwater aquatic life, and 5, 200 ///L to protect human life (265). Isophorone is mildly toxic by inhalation, but because of its low volatiUty it is not a serious vapor hazard. 

Properties of other higher a-olefins and those of some commercially significant cycloolefins are given in Table 2. These monomers are fiquids at ambient temperature and pressure. They are highly combustible and can form explosive mixtures with air. The primary health hazards presented by these monomers are associated with inhalation or prolonged skin contact that can cause irritation. 

Activated carbon generally presents no particular health hazard as defined by NIOSH (62). However, it is a nuisance and mild irritant with respect to inhalation, skin contact, eye exposure, and ingestion. On the other hand, special consideration must be given to the handling of spent carbon that may contain a concentration of toxic compounds. 

The hazards of handling branched-chain acids are similar to those encountered with other aliphatic acids of the same molecular weight. Eye and skin contact as well as inhalation of vapors of the shorter-chain acids should be avoided. 

Toxic hazards may be caused by chemical means, radiation, and noise. Routes of exposure are (1) eye contact, (2) inhalation, (3) ingestion, (4) skin contact, and (5) ears (noise). An Industrial Hygiene Guide (IHG) is based on exposures for an 8-h day, 40-h week, and is not to be used as a guide in the control of health hazards. It is not to be used as a fine hne between safe and dangerous conditions. 

Beeause the diisoeyanate is used in exeess, there is usually free monomer present. Isoeyanates are hazardous materials particularly upon inhalation and skin contact. Chronic exposure ean lead to sensitization. The adhesives must therefore be used with proper ventilation and should not come in eontact with the skin in the unreaeted state. Vapor monitoring badges for employees and periodie real time vapor monitoring around process equipment is reeommended. 

Health Hazards Information - Recommended Personal Protective Equipment Protective clothing should be worn when skin contact can occur. Respiratory protection is necessary when exposed to vapor. Complete eye protection is recommended Symptoms Following Exposure Breathing of vapors... 

---