Hardwood cells

Obst JR (1982) Guaiacyl and synngyl lignin composition in hardwood cell components Holzforschung 36 143-152... 

DammstrSm, S., Salmon, L., Gatenholm, P. On the interactions between cellulose and xylan, a biomimetic simulation of the hardwood cell wall. BioResources 4, 3-14 (2009)... 

In view of these findings it seems likely that structural and chemical differences in the very inhomogeneous lignin substrate should lead to a specialization in the respective degrading microorganisms, particularly the oxidative enzymes expressed by each organism. Bacteria also attack softwood and hardwood cell walls. They have been described as primary wood colonizers [92]. 

Upon maturation of both softwoods and hardwoods, the parenchyma cells at the core die. This portion of the wood is called heartwood and often contains polyphenols, davones, and other colored compounds that do not occur in the contrasting sapwood. A clear, visual distinction usually exists between heartwood and sapwood, depending on the species. Heartwood compounds, eg, dihydro quercetin (taxifofin,... 

Other distinct classes of wood in a tree include the portion formed in the first 10—12 years of a tree s growth, ie, juvenile wood, and the reaction wood formed when a tree s growth is distorted by external forces. Juvenile fibers from softwoods are slightly shorter and the cell walls thinner than mature wood fibers. Reaction wood is of two types because the two classes of trees react differentiy to externally applied stresses. Tension wood forms in hardwoods and compression wood forms in softwoods. Compression wood forms on the side of the tree subjected to compression, eg, the underside of a leaning tmnk or branch. Tension wood forms on the upper or tension side. Whereas in compression wood, the tracheid cell wall is thickened until the lumen essentially disappears, in tension wood, tme fiber lumens are filled with a gel layer of hemiceUulose. 

The cells that make up the stmctural elements of wood are of various si2es and shapes and are firmly bonded together. Dry wood cells may be empty or pardy filled with deposits such as gums, resias, or other extraneous substances. Long and poiated cells, known as fibers or tracheids, vary gready ia length within a tree and from species to species. Hardwood fibers are - 1 mm long, and softwood fibers are - 3 to 8 mm. 

Carbohydrates. Carbohydrates are the principal components of the cell wall, comprising 65—75% by weight of the dry wood. Total hydrolysis yields simple sugars, primarily glucose and xylose in hardwoods and glucose and mannose in softwoods. Minor amounts of galactose, arabinose, and rhamnose are present. 

In hardwoods, morphological structural elements in longitudinal series comprise the segmented structure termed vessel . Vessels, which are exposed in transverse section, constitute about 10-46% of the stem volume in deciduous hardwoods and are cells of relatively large diameters (50-300 p.m). Vessels have in short the appearance of open vertical tubes within the wood structure because their end walls have partially dissolved. By comparison, the hardwood vessel diameter can be as much a 10 times the diameter of a softwood fiber. 

Xylan-type polysaccharides are the main hemicellulose components of secondary cell walls constituting about 20-30% of the biomass of dicotyl plants (hardwoods and herbaceous plants). In some tissues of monocotyl plants (grasses and cereals) xylans occur up to 50% [6j. Xylans are thus available in huge and replenishable amoimts as by-products from forestry, the agriculture, wood, and pulp and paper industries. Nowadays, xylans of some seaweed represent a novel biopolymer resource [4j. The diversity and complexity of xylans suggest that many useful by-products can be potentially produced and, therefore, these polysaccharides are considered as possible biopolymer raw materials for various exploitations. As a renewable resource, xylans are... 

Glucomannans (GM) and galactoglucomannans (GGM), common constituents of plant cell walls, are the major hemicellulosic components of the secondary cell walls of softwoods, whereas in the secondary cell walls of hardwoods they occur in minor amounts. They are suggested to be present together with xylan and fucogalactoxyloglucan in the primary cell walls of higher plants [192]. These polysaccharides were extensively studied in the 1960s [6,193]. 

The two types of wood differ, however, in their nature and structure. The main structural characteristic of the hardwoods (which are botanically known as angiosperms, plants that flower to pollinate for seed reproduction) is that in their trunks or branches, the volume of wood taken up by dead cells, varies greatly, although it makes up an average of about 50% of the total volume. In softwoods (from the botanical group gymnosperms, which do not have flowers but use cones for seed reproduction) the dead cells are much more elongated and fibrous than in hardwoods, and the volume taken up by dead cells may represent over 90% of the total volume of the wood. 

Table 2.1 The cell dimensions of typical hardwood and softwood.

The basic structure of all wood and woody biomass consists of cellnlose, hemicelluloses, lignin and extractives. Their relative composition is shown in Table 2.4. Softwoods and hardwoods differ greatly in wood stmctnie and composition. Hardwoods contain a greater fraction of vessels and parenchyma cells. Hardwoods have a higher proportion of cellulose, hemicelluloses and extractives than softwoods, but softwoods have a higher proportion of lignin. Hardwoods ate denser than softwoods. 

For battery separators, regenerated cellulose is placed on the surface of nonwoven so that the nonwoven is available to promote the wicking of the electrolyte. The nonwovens should not allow the penetration of viscose into itself. Suitable nonwovens are made from polypropylene, poly(vinyl alcohol), and hardwood hemps. Regenerated cellulose films are commonly used in alkaline manganese cells, both primary and secondary, in NiCd industrial batteries, as well as in silver—zinc batteries. 

Hemicelluloses are quite difficult to extract from cell walls of softwoods (9,10) and are usually destroyed or depolymerized during the chemical pulping of these raw materials. However, other hemicelluloses, primarily xylans, can be extracted by cold, dilute sodium hydroxide from grasses and many hardwoods in very high yields (9,77). These xylans are deacetylated in an alkaline medium and are for the most part insoluble (hemicellulose A). A partially water soluble fraction (hemicellulose B) has also been... 

---