Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hand trucks

Shelves, bins, pallets, hand trucks Construction tools and equipment... [Pg.863]

Liquids and sludges Drums 142-3,400 L Drum hand-trucks, pallets, forkhfts... [Pg.2238]

In front of the building a timber floor protected by a eave should be laid. Trucks coming and going with materials should be moved by hand. Trucks with pneumatic-tyred wheels or barrows with bronze wheels are best for this purpose. If a narrow-gauged track is to be used, in the vicinity of buildings holding blackpowder, the rails should be of wood and the trucks should be fitted with bronze wheels. [Pg.362]

Secure compressed gas cylinders at all times and transport them only while secured on a hand truck. [Pg.46]

Compressed Gas Tanks Should be Properly Moved. Compressed gas tanks should never be dragged, slid, or allowed to bang against one another. One should use a proper hand-truck or other suitable device for transporting the specific type of compressed gas tank. Compressed gas tanks should never be lifted by their caps, by magnets, or by ropes, chains, or slings unless the manufacturer has provided attachments (such as lugs) on the tanks. [Pg.271]

Always transport cylinders using a hand truck to which the cylinder is secured. [Pg.35]

Regularly check fume hoods for proper airflow. Ensure that fume hood exhaust is not drawn back into the intake for general building ventilation. Secure compressed gas cylinders at all times and transport them only while secured on a hand truck. [Pg.43]

CGA P-1, 3.5 29CFR1926.350(a)(4) 4.2.1.7 A suitable hand truck, forklift, cylinder pallet system, or similar material-handling device shall be used with the container properly secured to tiie device. When powered vehicles transport cylinders, they shall be secured in a vertical position. [Pg.186]

CGA G-1, 5.2.5 4.2.3.S Unless acetylene cylinders are to be moved while secured in an upright position to a suitable hand truck, pressure regulators should be removed and valve protection caps, if provided for in the cylinder design, should be attached. [Pg.188]

Pallets- Wooden platforms used for storing and shipping material. Forklifts and hand trucks are used to move these wooden platforms around. [Pg.267]

There is a wide range of industrial tmcks available. Going from simple to sophisticated and from wide-aisle to narrow-aisle tmcks, a possible list would be as follows (1) hand truck/cart, (2) pallet jack, (3) walkie stacker, (4) pallet/platform tmck, (5) counterbalanced lift tmck, (6) straddle truck, (7) reach truck, (8) sideloader, (9) turret tmck, (10) storage/retrieval tmck, and (11) order picker tmck, among others. Examples of 2, 3, 5, 6, 8, 9, and 11 are shown in Figures 1, 2, 3, 4, 5, 6, and... [Pg.1505]

Hand trucks Low cost Low payload Movement of light loads, usually out of high volume processes... [Pg.845]

Hand trucks represent the simpler way for moving material in a factory environment. They are driven manually by human workers and they are usually characterized by a low payload and a low rate of deliveries per hour. [Pg.846]

Light loads can be transported with the aid of a variety of hand trucks and trailers largely depending on the shape of the articles. [Pg.317]

Figure 4.4 Hand truck for safe transportation of gas cylinders... Figure 4.4 Hand truck for safe transportation of gas cylinders...

See other pages where Hand trucks is mentioned: [Pg.173]    [Pg.228]    [Pg.81]    [Pg.950]    [Pg.593]    [Pg.13]    [Pg.358]    [Pg.159]    [Pg.568]    [Pg.234]    [Pg.235]    [Pg.236]    [Pg.698]    [Pg.472]    [Pg.159]    [Pg.568]    [Pg.81]    [Pg.187]    [Pg.1503]    [Pg.92]    [Pg.844]    [Pg.845]    [Pg.845]    [Pg.846]    [Pg.317]    [Pg.277]   
See also in sourсe #XX -- [ Pg.317 ]




SEARCH



Trucking

© 2024 chempedia.info