Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Grades characteristics

It was experimentally demonstrated that some thick Korean kaohn-ferric oxide Functionally Graded Materials could be produced by a newly developed filtration method, and surface treating of the FGMs could be processed by a KrF excimer laser and cutting of the FGMs could be processed by a Nd-YAG laser. It was concluded that the characteristic properties of the FGMs surface when processed with the lasers depends directly on the functionally graded characteristics. [Pg.342]

In this paper, we report the preliminary results on the synthesis and properties of epoxy-modified ZrP. These materials show classical graded characteristics in composition, microstructure, and properties. The microstructure-property relationships in these novel FGMs are discussed. [Pg.755]

Functionally-graded ZrP materials with improved physical and mechanical properties of ZrP have been produced by epoxy infiltration. These materials show classical functionlly-graded characteristics with continuous change in composition, physical and mechanical properties. [Pg.759]

Phillips, M. and A.M. Bacot The chemical composition of certain grades of Type B American Hue-cured tobacco Relationship of composition to grade characteristics J. Assoc. Off. Agr. Chem. 36 (1953) 504—524. PhiUpotts, D.F., D. Spincer, and D.T. Westcott The effect of the natural sugar content of tobacco upon the acetaldehyde concentration found in smoke Beitr. Tabakforsch. 8 (1975) 7-10. [Pg.1379]

In the OMT method each of the RIFs is given a score from A to F. The grade characteristics are shown Table 1. [Pg.2118]

Polypropylene Grade Characteristics Typically 50-100 Grades per producer. [Pg.50]

Steel grade Characteristics, example Quality grade... [Pg.559]

The duplex grades characteristically contain molybdenum and have a structure approximately 50% ferrite and 50% austenite because of the excess of ferrite-forming elements such as chromium and molybdenum. The duplex structure, in combination with molybdenum, gives them improved resistance to chloride-induced corrosion (pitting, crevice corrosion, and SCC), in aqueous enviromnents particularly. [Pg.198]

Table 7.1 Correlations between PE grade characteristics and uses ... Table 7.1 Correlations between PE grade characteristics and uses ...
A cement content of 300 kg/m, a maximum grain size 31.5 mm, and a water-cement ratio of 0.58 are specified for the Reference Concrete [3]. These data were also accepted in the experiments, except for the grading characteristics. Instead, two mixes with a maximum grain size of 16 and 4 mm, respectively, have been designed. The two grading curves have been derived from the curve of the Reference Concrete by geometric transformation [6], reducing, as a consequence, the fineness moduli to below the RILEM proposal. [Pg.507]

Characteristics for food-grade paraffins Codex test French pharmacopoeia... [Pg.311]

Graded index stmctures allow greater control over fibre characteristics. In these stmctures, the core has a variable... [Pg.2870]

Many grades of acetal resins are Hsted in Underwriters Eaboratories (UL) Kecogni d Component Directory. UL assigns temperature index ratings indicating expected continuous-use retention of mechanical and electrical properties. UL also classifies materials on the basis of flammability characteristics homopolymer and copolymer are both classified 94HB. [Pg.60]

Calendering. The rheological characteristics of the sheet extmsioa grades of ABS easily adapt them to caleaderiag to produce film from 0.12... [Pg.206]

The objective of the FCC is to define food-grade chemicals in terms of the characteristics that estabUsh identity, strength, and quahty. It provides specifications in monograph form for some 900 food additives, together with analytical test procedures by which compliance with the specifications can be determined. The third edition was pubUshed in 1981 supplements followed in 1983, 1986, 1991, and 1993. The fourth edition is in preparation as of this writing and is to include monographs for almost 1000 food chemicals, including flavors. [Pg.446]

The type and resistivity of aH grades of germanium metal are also measured in accord with F42 and F43. The transmission characteristics of... [Pg.280]

Grade XXP is better than Grade XX in electrical and moisture-resisting properties and more suitable for hot punching. It is intermediate between Grades XP and XXXP in punching and cold flow characteristics. [Pg.536]

Grade XXX demonstrates good electrical properties in high humidity apphcations and has minimum cold flow characteristics. [Pg.536]


See other pages where Grades characteristics is mentioned: [Pg.105]    [Pg.339]    [Pg.2118]    [Pg.303]    [Pg.716]    [Pg.185]    [Pg.183]    [Pg.138]    [Pg.105]    [Pg.339]    [Pg.2118]    [Pg.303]    [Pg.716]    [Pg.185]    [Pg.183]    [Pg.138]    [Pg.276]    [Pg.313]    [Pg.791]    [Pg.378]    [Pg.98]    [Pg.178]    [Pg.207]    [Pg.14]    [Pg.23]    [Pg.196]    [Pg.230]    [Pg.239]    [Pg.26]    [Pg.28]    [Pg.188]    [Pg.192]    [Pg.345]    [Pg.222]    [Pg.536]    [Pg.246]    [Pg.247]    [Pg.527]   
See also in sourсe #XX -- [ Pg.19 ]




SEARCH



© 2024 chempedia.info