Graded-index polymer optical fiber

FIGURE 5.31 Attenuation of graded index polymer optical fiber in comparison with that of silica fiber. [Pg.589]

Step-index and graded-index polymer optical fibers... [Pg.170]

The optimum refractive-index distribution of the high bandwidth graded-index polymer optical fiber (GI POP) was clarified by consideration of both modal and material dispersions. The ultimate bandwidth achieved by the POP is investigated by a quantitative estimation of the material dispersion as well as the modal dispersion. [Pg.58]

Since all commercially available POF have been of the step-index (SI) type, the modal dispersion limits the possible bit rate of POF links to less than 100 megabit per second (Mb/s). Because of this, it has been thought that POF cannot be utilized for high speed transmission medium. Recently, however, we proposed a large core, low loss, and high bandwidth graded-index polymer optical fiber (GI POF) (7,2) for the first time and we confirmed that 2.5 Gb/s signal transmission for 100 m distance was possible in the GI POF (2,5). [Pg.59]

High-handwidth, graded-index polymer optical fiber for near-infrared use. Appl. Opt., 35, 7085-7090. [Pg.88]

R., Vallabhan, C.P.G., Nampoori, V.P.N., and Radhakrishnan, P. (2008) Fluorescence characterization and gain studies on a dye-doped graded index polymer optical-fiber preform. Opt. Laser Tech.,... [Pg.89]

Kondo, A., Ishigure, T., and Koike, Y. (2005) Fabrication process and optical properties of perdeuterated graded-index polymer optical fiber. J. lightwave Technol., 23, 2443 2448. [Pg.90]

Koike Y., Ishigure T., Eisuke N. / High-Bandwidth graded-index polymer Optical Fiber. HJournal of lightwave technology, 1995, vol.13, No 7, pp. 1475-1489. [Pg.111]

Low loss and high bandwidth polystyrene-based graded index polymer optical fiber. / Lightwave Technol., 31 (14), 2407. [Pg.9]

Naritomi, M., Murofushi, H., and Nakashima, N. (2004) Dopants for a perfluorinated graded index polymer optical fiber. Bull, Chem. Sac, Jpn., 77 (11), 2121-2127. [Pg.10]

Optimization of the refractive-index distribution of graded-index polymer optical fiber by the diffusion-assisted fiibrication process. Appl. Phys. Express, 5 (4), 042501-1-3042501-3. [Pg.99]

Nihei, E., Ishigure, X, and Koike, Y. (1996) High-bandwidth, graded-index polymer optical fiber for near-infrared use. Appl Opt, 35 (36), 7085-7090. Makino, K., Kado, T., Inoue, A., and Koike, Y. (2012) Low loss graded index polymer optical fiber with high stability under damp heat conditions. Opt Express, 20 (12), 12893-12898. Olshansky, R. and Oaks, S.M. (1978) Differential mode attenuation measurements in graded-index fibers. Appl. Opt, 17 (11), 1830-1835. [Pg.117]

T., and Koike, Y. (2005) Analysis of graded-index polymer optical fiber link... [Pg.118]

Giaretta, G. Wegmueller, M., and Yelamarty, R.V. (1999) 11 Gb/sec data transmission through 100 m of perflu-orinated graded-index polymer optical fiber. Proceedings of Optical Fiber Communication Conference, 1999,... [Pg.168]

Koike, Y, High-bandwidth graded-index polymer optical fiber. Polymer, 32, 1737, 1991. [Pg.243]

Y. Koike et al. [107, 108] obtained commercial high-bandwidth graded-index polymer optical fiber with quadratic RID profile and capable of transmitting optical signals at a high rate in short-wave multimedia (multimodal, multichannel) translation networks by the method of interphase gel-polymerization [109], which could not be performed using polymer optieal fibers possessing a stepwise RID profile [108]. [Pg.26]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...