Gasification indirect liquefaction process

Biomass Gasification-Indirect Liquefaction Process Development Units (PDUs)... 

In liquefaction systems wood and wood wastes are the most common fuelstocks. They are reacted with steam or hydrogen and carbon monoxide to produce liquids and chemicals. The chemical reactions that take place are similar to gasification but lower temperatures and higher pressure are used. Liquefaction processes can be direct or indirect. The product from liquefaction is pyrolytic oil which has a high oxygen content. It can be converted to diesel fuel, gasoline or methanol. 

The plant processes 26,840 TPSD of low sulfur North Dakota lignite. The sulfur is 1.3 wt%/DAF coal. The coal analysis is shown in Table II. Output from the plant is 268,700 MM Btu/day of SNG, equivalent to 45,000 BOE/day. Total production of by-product elemental sulfur is 161 tons/day. This represents 78 wt% of total sulfur input from the coal feedstock. Since goal gasification and indirect liquefaction facilities are most likely to use Western low sulfur lignite or subbituminous coals, this represents the low sulfur case for coal conversion. 

Much attention was then paid to developing processes for the indirect liquefaction of coal (coal gasification followed by synthesis), but the high level of investment required for coal conversion remains a major constraint on its commercial application. 

Gasification determines to a large extent the cost of indirect liquefaction. Also, the thermal efficiency of gasification contributes largely to the overall thermal efficiency of the entire process. The thermal efficiency is defined as the lower heating value of the products divided by the lower heating value of the feed... 

After World War II, direct liquefaction of coal became uneconomical as the use of lower-cost petroleum products became more widespread. However, the German process of indirect coal liquefaction, the Fischer-Tropsch process, continued to hold some interest. The Fischer-Tropsch process first involved production of a carbon monoxide and hydrogen-rich synthesis gas by the controlled gasification of coal followed by a catalytic reaction process to yield a valuable mixture of hydrocarbon products. Simplified Fischer-Tropsch reactions are shown by the following equations ... 

We will consider three processes in more detail to show how the sulfur in the original feedstock material (coal or oil shale) is recovered as elemental by-product sulfur. In this way yields of sulfur per barrel of product can be computed. The three processes will illustrate examples of coal gasification for production of SNG, methanol or indirect liquids, direct liquefaction for production of naphtha and synthetic crude oil and finally, oil shale retorting for production of hydrotreated shale oil. 

---