Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Frequency doubling generation

N-(2-acetamido-4-nitropheryl)pyrrolidene (PAN) is dimorphic. The thermodynamically stable form is non-polar (Fig.2), (14). The crystal space group is P21 with two independent molecules per asymmetric unit which are related by a pseudo center of inversion. This crystal does not display measurable frequency doubling generation. [Pg.480]

SHG Optical second-harmonic generation [95, 96] A high-powered pulsed laser generates frequency-doubled response due to the asymmetry of the interface Adsorption and surface coverage rapid surface changes... [Pg.318]

This teclnhque can be used both to pennit the spectroscopic detection of molecules, such as H2 and HCl, whose first electronic transition lies in the vacuum ultraviolet spectral region, for which laser excitation is possible but inconvenient [ ], or molecules such as CH that do not fluoresce. With 2-photon excitation, the required wavelengdis are in the ultraviolet, conveniently generated by frequency-doubled dye lasers, rather than 1-photon excitation in the vacuum ultraviolet. Figure B2.3.17 displays 2 + 1 REMPI spectra of the HCl and DCl products, both in their v = 0 vibrational levels, from the Cl + (CHg) CD reaction [ ]. For some electronic states of HCl/DCl, both parent and fragment ions are produced, and the spectrum in figure B2.3.17 for the DCl product was recorded by monitoring mass 2 (D ions. In this case, both isotopomers (D Cl and D Cl) are detected. [Pg.2083]

Por IR-Raman experiments, a mid-IR pump pulse from an OPA and a visible Raman probe pulse are used. The Raman probe is generated either by frequency doubling a solid-state laser which pumps the OPA [16], or by a two-colour OPA [39]. Transient anti-Stokes emission is detected with a monocliromator and photomultiplier [39], or a spectrograph and optical multichannel analyser [40]. [Pg.3039]

Pumping is with a flashlamp, as in the case of the ruby laser, and a pulse energy of the order 1 J may be achieved. Frequency doubling (second harmonic generation) can provide tunable radiation in the 360-400 nm region. [Pg.348]

Materials for Frequency Doubling. Second-order NLO materials can be used to generate new frequencies through second harmonic generation (SHG), sum and difference frequency mixing, and optical parametric oscillation (OPO). The first, SHG, is given in equation 3. [Pg.137]

Barium sodium niobium oxide [12323-03-4] Ba2NaNb 02, finds appHcation for its dielectric, pie2oelectric, nonlinear crystal and electro-optic properties (35,36). It has been used in conjunction with lasers for second harmonic generation and frequency doubling. The crystalline material can be grown at high temperature, mp ca 1450°C (37). [Pg.482]

Frequency doubled/Raman shifted fiber laser to generate 589 nm. This is a diode pumped, CW format currently under development. [Pg.225]

Ar+ lasers are robust, but the efficiency is low, f 0.05%. The heat generating additional turbulence near the telescope is a serious problem. They are now replaced with frequency doubled YAG lasers. These cannot yet deliver quite the same power at 532 nm, but they are much more efficient. CW dye laser systems have now been used to demonstrate Na LGSs at several observatories. [Pg.226]

The proportionality constants a and (> are the linear polarizability and the second-order polarizability (or first hyperpolarizability), and x(1) and x<2) are the first- and second-order susceptibility. The quadratic terms (> and x<2) are related by x(2) = (V/(P) and are responsible for second-order nonlinear optical (NLO) effects such as frequency doubling (or second-harmonic generation), frequency mixing, and the electro-optic effect (or Pockels effect). These effects are schematically illustrated in Figure 9.3. In the remainder of this chapter, we will primarily focus on the process of second-harmonic generation (SHG). [Pg.524]

For EPy-doped PMMA film, a 308 nm excimer laser (Lumonics TE 430T-2, 6ns) was used as as exposure source. We used a tine-correlated single photon counting systen (18) for measuring fluorescence spectra and rise as well as decay curves of a snail ablated area. The excitation was a frequency-doubled laser pulse (295 nm, lOps) generated from a synchronously punped cavity-dumped dye laser (Spectra Physics 375B) and a CW mode-locked YAG laser (Spectra Physics 3000). Decay curves under a fluorescence microscope were measured by the same systen as used before (19). [Pg.403]

One of the more interesting applications of non-linear optical effects is the generation of the second harmonic. This phenomenon results when a laser beam passes through a material having second-order NLO properties (hence, composed by non-centrosymmetric molecules) the light emitted has a frequency double that of the incident radiation (or the wavelength has been halved). [Pg.202]

D. Gunzun, Y. Li, and M. Xiao, Blue light generation in single-pass frequency doubling of femtosecond pulses in KNb03, Optics Communications 180, 367-371 (2000). [Pg.225]


See other pages where Frequency doubling generation is mentioned: [Pg.1971]    [Pg.345]    [Pg.13]    [Pg.134]    [Pg.136]    [Pg.137]    [Pg.391]    [Pg.37]    [Pg.316]    [Pg.337]    [Pg.337]    [Pg.212]    [Pg.226]    [Pg.235]    [Pg.243]    [Pg.130]    [Pg.131]    [Pg.134]    [Pg.154]    [Pg.286]    [Pg.621]    [Pg.158]    [Pg.815]    [Pg.27]    [Pg.57]    [Pg.157]    [Pg.526]    [Pg.527]    [Pg.232]    [Pg.534]    [Pg.21]    [Pg.24]    [Pg.13]    [Pg.400]    [Pg.416]    [Pg.192]    [Pg.192]    [Pg.211]   


SEARCH



Double frequency

Doubled frequency

Frequency doubling

© 2024 chempedia.info