Free radical anions

The kind of reaction which produces a dead polymer from a growing chain depends on the nature of the reactive intermediate. These intermediates may be free radicals, anions, or cations. We shall devote most of this chapter to a discussion of the free-radical mechanism, since it readily lends itself to a very general treatment. The discussion of ionic intermediates is not as easily generalized. 

On the basis of these observations, criticize or defend the following proposition Regardless of the monomer used, zero-order Markov (Bernoulli) statistics apply to all free radical, anionic, and cationic polymerizations, but not to Ziegler-Natta catalyzed systems. 

There are two problems in the manufacture of PS removal of the heat of polymeriza tion (ca 700 kj /kg (300 Btu/lb)) of styrene polymerized and the simultaneous handling of a partially converted polymer symp with a viscosity of ca 10 mPa(=cP). The latter problem strongly aggravates the former. A wide variety of solutions to these problems have been reported for the four mechanisms described earlier, ie, free radical, anionic, cationic, and Ziegler, several processes can be used. Table 6 summarizes the processes which have been used to implement each mechanism for Hquid-phase systems. Free-radical polymerization of styrenic systems, primarily in solution, is of principal commercial interest. Details of suspension processes, which are declining in importance, are available (208,209), as are descriptions of emulsion processes (210) and summaries of the historical development of styrene polymerization processes (208,211,212). 

Process Free radical Anionic Cationic Zeigler... 

Polymerization Reactions. The polymerization of butadiene with itself and with other monomers represents its largest commercial use. The commercially most important polymers are styrene—butadiene mbber (SBR), polybutadiene (BR), styrene—butadiene latex (SBL), acrylonittile—butadiene—styrene polymer (ABS), and nittile mbber (NR). The reaction mechanisms are free-radical, anionic, cationic, or coordinate, depending on the nature of the initiators or catalysts (194—196). 

Addition polymerization is employed primarily with substituted or unsuhstituted olefins and conjugated diolefins. Addition polymerization initiators are free radicals, anions, cations, and coordination compounds. In addition polymerization, a chain grows simply hy adding monomer molecules to a propagating chain. The first step is to add a free radical, a cationic or an anionic initiator (I ) to the monomer. For example, in ethylene polymerization (with a special catalyst), the chain grows hy attaching the ethylene units one after another until the polymer terminates. This type of addition produces a linear polymer ... 

Undergoes free radical, anionic, and cationic polymerization... 

Chain gro tvth polymerization begins when a reactive species and a monomer react to form an active site. There are four principal mechanisms of chain growth polymerization free radical, anionic, cationic, and coordination polymerization. The names of the first three refer to the chemical nature of the active group at the growing end of the monomer. The last type, coordination polymerization, encompasses reactions in which polymers are manufactured in the presence of a catalyst. Coordination polymerization may occur via a free radical, anionic, or cationic reaction. The catalyst acts to increase the speed of the reaction and to provide improved control of the process. 

Polymethyl methacrylate Methyl methacrylate Free radical Anionic... 

A. Weller and K. Zachariasse 157-160) thoroughly investigated this radical-ion reaction, starting from the observation that the fluorescence of aromatic hydrocarbons is quenched very efficiently by electron donors such as N,N diethylaniline which results in a new, red-shifted emission in nonpolar solvents This emission was ascribed to an excited charge-transfer complex 1(ArDD(H )), designated heteroexcimer, with a dipole moment of 10D. In polar solvents, however, quenching of aromatic hydrocarbon fluorescence by diethylaniline is not accompanied by hetero-excimer emission in this case the free radical anions Ar<7> and cations D were formed. 

The efficiency and specificity of this method depends on the irreversibility of the whole process due to a high rate constant and favorable thermodynamics of Reaction (10) [4] and a high rate of subsequent Reaction (11) (which is the recombination of a free radical anion and a free radical cation with the diffusion rate constant of about 109 1 mol-1 s ). 

Traditional polymerizations usually involve AB-type monomers based on substituted ethylenes, strained small ring compounds using chain reactions that may be initiated by free radical, anionic or cationic initiators [20]. Alternatively, AB-type monomers may be used in polycondensation reactions. 

Perhaps the most striking new result is that, in all the various reactions investigated so far by flash photolysis, the end products of the photosubstitution are formed within a period of 10 s or less. Free radical anions are formed in some of the systems they have lifetimes of the order of 10 -10 s and they do not contribute significantly to substitution product formation. Evidendy in order to trace intermediates of the substitution reaction we have to resort to still faster methods (laser photolysis. Section 4). 

The kinetic chain reaction typically consists of three steps (1) initiation, (2) propagation, and (3) termination. The initiators for free radical, anionic, and cationic polymerizations... 

Materials that are constructed from organic polymers such as polyethylene, polystyrene, polyisoprene (natural rubber and a synthetic elastomer) and poly(vinyl chloride) are common features of our daily lives. Most of these and related organic polymers are generated from acyclic precursors by free radical, anionic, cationic or organometallic polymerisation processes or by condensation reactions. Cyclic precursors are rarely used for the production of organic polymers. 

Telechelic and semitelechelic polymers have been synthesized by a variety of free radical, anionic and, most recently, cationic techniques (1.2.9-12). The advantages of anionic procedures include functional purity, versatility of substitution, and monodisper-sity and control of polymer molecular weights. This... 

Electrolytic polymerization or electrolytically initiated polymerization, or shortly electro-initiated polymerization or electropolymerization, generally means initiation by the electron transfer processes which occur at the electrodes of an electrolytic cell containing monomer and electrolyte, in that by controlling the electrolysis current it is possible to control the generation of initiating species. Under appropriate conditions it may proceed by a free radical, anionic or cationic mechanism. In addition to the electrolytic addition polymerization, production of polymers through condensation reaction by electrolytic means should also be covered. Examples of each of these propagation mechanisms have now been reported in the literature. 

Poly(alkyl-cyanoacrylates) As poly(alkyl-cyanoacrylates) form strong bonds with polar substrates including the skin and living tissues, they exhibit bioadhesive properties. These polymers are synthesized by free-radical, anionic, or zwitterionic polymerization. As detailed in a recent review, poly(alkyl-cyanoacrylate) nanoparticles are prepared by emulsion polymerization, interfacial polymerization, nanoprecipitation, and emulsion-solvent evaporation methods [102],... 

Kinetic aspects of step-growth copolymerization have been examined in Section 10.2.2. The principal features of chain-growth copolymerization are very different, but are alike for all types of chain growth, that is, for free-radical, anionic, cationic, and coordination polymerization. 

The reactivity ratios for pairs of given monomers can be very different for the different types of chain-growth copolymerization free-radical, anionic, cationic, and coordination copolymerization. Although the copolymer equation is valid for each of them, the copolymer composition can depend strongly on the mode of initiation (see Figure 10.8). 

Free-radical polymerization. No matter whether the propagating centers are free radicals, anionic, cationic, or coordinated, the propagation rate is equal to the sum of the consumption rates of the two monomers, given by eqns 10.93 ... 

For efficient cationic polymerization of vinyl monomers, it is necessary that the carbon-carbon double bond be the strongest nucleophile in the molecule. Thus vinyl acetate would be classed as an electron-donor-type monomer (Section 7.10.2) but it cannot be polymerized cationically because the carbonyl group complexes the active center. (It is polymerized only by free radicals anionic initiators attack the ester linkage.)... 

---