Fluid-bed coking

Fluid-bed coking is a continuous version that delays coking. Here the cokes are formed on fludized coke particles that are circulated between the coking unit where the endothermic pyrolysis reaction takes place and the regenerator in which the coke particles are reheated by partly burning off. 

---

The H-Coal process could operate in one of two modes, depending on the desired product slate. In the "syn-cmde" mode, a fluid-bed coking unit was employed to maximize recovery of distillate from the Hquefaction product (Fig. 7a). When operated in the fuel oil mode (Fig. 7b), no coker was used and the primary product was a coal-derived low sulfur fuel oil. Total hydrogen demand on the process was also reduced in the latter mode of operation. 

Coking processes come in two basic forms - delayed coking, which is a semi-batch process, and fluid-bed coking, which is continuous. 

Catalytic Processes. A second group of refining operations which contribute to gas production are the catalytic cracking processes, such as fluid-bed catalytic cracking, and other variants, in which heavy gas oils are converted into gas, naphthas, fuel oil, and coke (5). 

The MTO process employs a turbulent fluid-bed reactor system and typical conversions exceed 99.9%. The coked catalyst is continuously withdrawn from the reactor and burned in a regenerator. Coke yield and catalyst circulation are an order of magnitude lower than in fluid catalytic cracking (FCC). The MTO process was first scaled up in a 0.64 m /d (4 bbl/d) pilot plant and a successfiil 15.9 m /d (100 bbl/d) demonstration plant was operated in Germany with U.S. and German government support. 

The catalyst is employed in bead, pellet, or microspherical form and can be used as a fixed bed, moving bed, or fluid bed. The fixed-bed process was the first process used commercially and employs a static bed of catalyst in several reactors, which allows a continuous flow of feedstock to be maintained. The cycle of operations consists of (/) the flow of feedstock through the catalyst bed (2) the discontinuance of feedstock flow and removal of coke from the catalyst by burning and (J) the insertion of the reactor back on-stream. The moving-bed process uses a reaction vessel, in which cracking takes place, and a kiln, in which the spent catalyst is regenerated and catalyst movement between the vessels is provided by various means. 

Manufacture. Titanium chloride is manufactured by the chlorination of titanium compounds (1,134—138). The feedstocks usually used are mineral or synthetic mtile, beneficiated ilmenite, and leucoxenes. Because these are all oxygen-containing, it is necessary to add carbon as well as coke from either coal or fuel oil during chlorination to act as a reducing agent. The reaction is normally carried out as a continuous process in a fluid-bed reactor (139). The bed consists of a mixture of the feedstock and coke. These are fluidized by a stream of chlorine iatroduced at the base (see Fluidization). The amount of heat generated in the chlorination process depends on the relative proportions of CO2 or CO that are formed (eqs. 1 and 2), and the mechanism that... 

The fluohmic process is a third process for manufacturing hydrogen cyanide, which is being appHed in Spain and AustraUa. This process involves the reaction of ammonia with a hydrocarbon, usually propane or butane, in a fluidized bed of coke particles. The endothermic heat of reaction is suppHed electrically through electrodes immersed in the fluid bed. Yields from propane and ammonia are reportedly above 85% and the waste gas is essentially hydrogen, but the costs for electricity are high. Thus this process is appHcable only when there is an inexpensive source of power. 

Deoxygenation reactions are catalyzed by acids and the most studied are solid acids such as zeolites and days. Atutxa et al. [61] used a conical spouted bed reactor containing HZSM-5 and Lapas et al. [62] used ZSM-5 and USY zeolites in a circulating fluid bed to study catalytic pyrolysis (400-500 °C). They both observed excessive coke formation on the catalyst, and, compared with non-catalytic pyrolysis, a substantial increase in gaseous products (mainly C02 and CO) and water and a corresponding decrease in the organic liquid and char yield. The obtained liquid product was less corrosive and more stable than pyrolysis oil. 

Figure 1. Selectivity for coke and gasoline octane as a function of unit cell. Gasoline octane curve obtained in a fixed fluid bed reactor at 657e conversion, 4 C/0, 30 WHSV, 510°C.

Figure 1731. Fluidized bed reactor processes for the conversion of petroleum fractions, (a) Exxon Model IV fluid catalytic cracking (FCC) unit sketch and operating parameters. (Hetsroni, Handbook of Multiphase Systems, McGraw-Hill, New York, 1982). (b) A modem FCC unit utilizing active zeolite catalysts the reaction occurs primarily in the riser which can be as high as 45 m. (c) Fluidized bed hydroformer in which straight chain molecules are converted into branched ones in the presence of hydrogen at a pressure of 1500 atm. The process has been largely superseded by fixed bed units employing precious metal catalysts (Hetsroni, loc. cit.). (d) A fluidized bed coking process units have been built with capacities of 400-12,000 tons/day.

---