Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Flotation of Sulphide Minerals

Chapter 1 General Review of Electrochemistry of Flotation of Sulphide Minerals... [Pg.1]

Abstract This chapter reviews the development of froth flotation achieved in the past one hundred years and accounts for the achievements of the theory of flotation of sulphide minerals in four aspects, which are the natural flotahility of sulphide minerals, the role of oxygen in the flotation of sulphide minerals, the interaction of collectors with sulphide minerals, the effect of the semi-conductor property of sulphide minerals and electrochemical behaviors in the grinding system. Furthermore, the purpose of this book is revealed in the end. [Pg.1]

In the 2nd period ranging from the 1930s to the 1950s, basic research on flotation was conducted widely in order to understand the principles of the flotation process. Taggart and co-workers (1930, 1945) proposed a chemical reaction hypothesis, based on which the flotation of sulphide minerals was explained by the solubility product of the metal-collector salts involved. It was plausible at that time that the floatability of copper, lead, and zinc sulphide minerals using xanthate as a collector decreased in the order of increase of the solubility product of their metal xanthate (Karkovsky, 1957). Sutherland and Wark (1955) paid attention to the fact that this model was not always consistent with the established values of the solubility products of the species involved. They believed that the interaction of thio-collectors with sulphides should be considered as adsorption and proposed a mechanism of competitive adsorption between xanthate and hydroxide ions, which explained the Barsky empirical relationship between the upper pH limit of flotation and collector concentration. Gaudin (1957) concurred with Wark s explanation of this phenomenon. Du Rietz... [Pg.1]

Since the 1960s , various electrochemical methods such as linear potential sweep voltammetry, cyclic voltammetry etc. and various surface analysis apparatuses such as infrared spectra, X-ray photoelecfron spectroscopy etc. have been developed to investigate the electrochemical reaction mechanism involved in the flotation of sulphide minerals (Fuerstenau et al., 1968 Woods, 1976 Ahmed, 1978 Stm, 1990 Feng, 1989 Buckley, 1995 Arce and Gonzalez, 2002 Bulut and Atak, 2002 Costa et al., 2002). [Pg.2]

Fuerstenau (1980) found that sulphide minerals are naturally floatable in the absence of oxygen. Yoon (1981) ever attributed the natural floatability of some sulphide minerals to their very low solubility. Finkelstein et al. (1975) considered that the natural floatability of sulphide minerals are due to the formation of elemental sulphur and related to the thickness of formation of elemental sulphur at the surface. Some authors reported that the hydrophobic entity in collectorless flotation of sulphide minerals were the metal-deficient poly sulphide (Buckley et al., 1985). No matter whichever mechanism, investigators increasingly concluded that most sulphide minerals are not naturally floatable and floated only under some suitable redox environment. Some authors considered that the natural floatability of sulphide minerals was restricted to some special sulphide minerals such as molybdenite, stibnite, orpiment etc. owing to the effects of crystal structure and the collectorless floatability of most sulphide minerals could be classified into self-induced and sulphur-induced floatability (Trahar, 1984 Heyes and Trahar, 1984 Hayes et al., 1987 Wang et al., 1991b, c Hu et al, 2000). [Pg.2]

Many authors indicated that self-induced flotation of sulphide minerals can occur only under moderately oxidizing environments. It is obvious that the... [Pg.4]

This book systematically summarizes the researches on electrochemistry of sulphide flotation in our group. The various electrochemical measurements, especially electrochemical corrosive method, electrochemical equilibrium calculations, surface analysis and semiconductor energy band theory, practically, molecular orbital theory, have been used in our studies and introduced in this book. The collectorless and collector-induced flotation behavior of sulphide minerals and the mechanism in various flotation systems have been discussed. The electrochemical corrosive mechanism, mechano-electrochemical behavior and the molecular orbital approach of flotation of sulphide minerals will provide much new information to the researchers in this area. The example of electrochemical flotation separation of sulphide ores listed in this book will demonstrate the good future of flotation electrochemistry of sulphide minerals in industrial applications. [Pg.19]

Although the nature of the hydrophobic entity responsible for the self-induced flotation of sulphide minerals remains somewhat obscure, most reported results clearly show that it is only when the environment becomes slightly oxidizing that flotation is observed. The elemental sulphur and polysulphide-intermediates in the oxidation of sulphide to sulphur have ever been suggested to be of the hydrophobic species. Whatever it is, there is no doubt that sulphur can generate hydrophobicity and floatability. [Pg.30]

Chapter 2 Natural Floatability and Collectorless Flotation of Sulphide Minerals -AG =244.891(kJ/mol)... [Pg.36]


See other pages where Flotation of Sulphide Minerals is mentioned: [Pg.1]    [Pg.2]    [Pg.2]    [Pg.3]    [Pg.23]    [Pg.26]    [Pg.29]   


SEARCH



Electrochemical Flotation Separation of Sulphide Minerals

Flotation of minerals

Mineral flotation

Natural Floatability and Collectorless Flotation of Sulphide Minerals

Sulphide minerals

© 2024 chempedia.info