Floating driver

Floating-shaft or spacer coupling Regular flexible couplings connect the driver and driven shafts with relatively close ends and are suitable for limited misalignment. However, allowances sometimes have to be made to accommodate greater misalignment or when the ends of the driver and driven shafts have to be separated by a considerable distance. 

Driver-coitp./Gear Gear/Comp, Float Req d. 

Now, suppose that Jessica Mosher Pollard, bom on October 19, 1970, needs to be assigned a number. The alternative month code has already been used, so a collision will occur unless the hashing function is somehow altered. Without such an alteration, her driver s license number will be either POLLAJM304PR or POLLAJM3047R. Either way, two people will be assigned the same number and a collision will occur. It is because the function is not one-to-one that problems result. When Jessica s number is typed into a computer, either Joseph s or John s records may be retrieved. Consequently, having no collisions (a one-to-one function) is very desirable. This function should be onto, as well. Otherwise, extra numbers will be floating around in the system without any drivers associated with them. This could cause data entry and retrieval problems. 

The CHTR incorporates a passive power regulation system (PPRS) [XXIX-5]. This system includes a gas header filled with helium gas at moderate pressure. The header is attached to a niobium driver tube, which contains lead-bismuth eutectic alloy as driven liquid. The driver tube is housed within a control tube that contains an annular control rod made of boron carbide with niobium cladding. The annular space between the driver and control tube contains lead-bismuth eutectic, on which the control rod floats. The space above the liquid... 

The same vehicles also had a conflicting layout for the bucket controls. In both cases four vertical levers were used to control bucket float, crowd, eject and QAS. The layout on the Rhino reading from the driver s left to right was as follows ... 

---