Feeding system, grid

The pasting machine consists mainly of a grid feeding system, hopper system, pasting belt system, after-hopper conveying system, and a PLC/main controller. 

Fig. 12. OxyTech Systems MDC cell a, brine feed rotometer b, head sight glass c, cell head d, cathode assembly e, tube sheet f, grid plate g, cathode...

Twenty-five of the 5-kW fuel cell systems called GenSys5CS will be installed at LIPA s West Babylon Fuel Cell Demonstration Site, which currently contains fuel cell systems feeding directly into the Long Island electrical grid. The remaining 20 systems will generate on-site heat and power for single or multi-family residential sites, for the first time in LIPA s ser-... 

A demonstration of a MCFC power plant at an automobile manufacturing plant site in Tuscaloosa, Alabama is planned for the first quarter of 2001. The 250 kilowatt system will feed the production facility power distribution grid. Four companies are teaming up to support the program Southern Company, Alabama Municipal Electric Authority (AMEA), Fuel Cell Energy, and Mercedes Benz U.S. International, Inc. (MBUSI). The system will employ FCE s stack and MTU s power plant design, called the Hot Module. ... 

Electric Power System Design For specific applications, fuel cells can be used to supply DC power distribution systems designed to feed DC drives such as motors or solenoids, controls, and other auxiliary system equipment. The goal of the commercial fuel cell power plant is to deliver usable AC power to an electrical distribution system. This goal is accomplished through a subsystem that has the capability to deliver the real power (watts) and reactive power (VARS) to a facility s internal power distribution system or to a utility s grid. The power conditioning... 

Fluidized bed reactors typrcally are vertical cylindrical vessels equipped with a support grid and feed sparger system for adequate fluidization and feed distribution, internal cooling coils for heat removal, and either external or internal cyclones to minimize catalyst carryover. Fluidizauon of the catalyst assures intimate contact between feed and product vapors, catalyst, and heat-transfer surfaces, and results in a uniform temperature within the reactor. Reaction heat can be removed by generating steam within the cooling coils or by some oilier heat-transfer medium. 

In a load-following control system, as the demand for current falls, the fuel feed flow is reduced until a predetermined minimum value is reached or until a fuel deficit is detected. If the fuel flow cannot be raised when a fuel deficit is detected, the inverter drawing power from the cell stack will reduce the current draw. If the fuel cell system is connected to a grid, which is also connected to a booster, this is not a problem, because more power can be drawn from the grid to make up the shortfall. If the grid is isolated, it is necessary to shed some of the load on the cells or by making up the shortfall from battery or other storage systems such as capacitor banks in the short term. 

The sample probes, containers, and procedures were the same as described for gas sampling of the reactor. In each case the sampling gridwork was the same as previously described. Each sampling period through one full grid of the reactor required about one hour so it was easy to tell from the operating charts that no variations occurred in feed rates or reactor operations that would affect the sample series. Each test required approximately 50 millicuries of Kr-85. Before and after each series of tests the reactor was sampled without radioactive isotope injection to insure a "blank," i.e., no radioactivity in the system from any other conceivable or inconceivable source. 

The sensor consisted of a vacuum tube containing a filament, grid and anode, very similar in form to the thermionic triode valve. An adjustable leak was arranged to feed a portion of the column eluent into the gauge which was operated under reduced pressure. The sensor was fitted with its own pumping system and vacuum gauge and the usual necessary cold traps. Helium was used as a carrier gas and the grid collector-electrode was set at +18 V with respect to the cathode... 

FIGURE 14.3 Integrated biomass production-conversion system for growth and processing of alfalfa to yield high-protein animal feed supplement and electricity for the grid. From DeLong... 

---