Fatty alkanolamides Manufacture

Condensate 6117,7S09, CC. [Manufacturers Chems.] Fatty alkanolamides emulsifier, dei ent, wetting agent, dye assistant... 

Cosmetics and Personal Care Products. Alkanolamines ate important taw materials in the manufacture of creams (95—97), lotions, shampoos, soaps, and cosmetics. Soaps (98) formed from triethanolamine and fatty acids ate mild, with low alkalinity and excellent detergency. Triethanolamine lauryl sulfate is a common base for shampoos (99—101) and offers significant mildness over sodiumlauryl sulfate. Diethanolamine lauryl sulfate and fatty acid soaps of mono- and trietban olamine can also be used in shampoos and bubble bath formulations. Chemistry similar to that used in soluble oils and other emulsifiers is appUcable to cleansing creams and lotions (102,103). Alkanolamides or salts ate added to the shampoo base to give a smooth, dense foam (104). 

Many primary fatty amides which are available from various manufacturers are Hsted in Table 3. In 1986 approximately 55,000 metric tons of amides and bisamides were produced world wide (58), the majority of which are bisamides, followed in volume by primary amides. Most of these products are shipped in sohd form in bag or dmm quantities. Major producers of primary fatty amides are Akzo, Glyco, Humko, and Sherex. Bisamides are produced by Akzo, Milacron, and Syntex. There are over 100 producers of alkanolamides in the world, most of which are small specialized manufacturers to a specific industry. GAP, Henkel, Sherex, and Witco are among the principal producers. The most widely used alkanolamides are the Ai,Ai-bis(2-hydroxyethyl) fatty amides, mostly produced from middle-cut coco fatty acids (6% capryflc, 7% capric, 51% lauric, 19% myristic, 9% palmitic, and 2% stearic acids). An estimated 77,000 metric tons of alkanolamide was produced worldwide in 1986 (59). 

Industrial surfactants find uses in almost every industry, from asphalt manufacturing to carpet fibers, from pulp and paper production to leather processing. Examples of the types of chemicals used as surfactants are fatty alcohol sulfates, alkanolamides, alkoxylates, sulfosuccinates, amines, quaternaries, phosphate esters, acid esters, blockcopolymers, betaines, imidazolines, alkyl sulfonates, etc. 

Depending on whcih of the four types of alkanolamide is to be produced, the starting material could be either fatty acid, methyl ester, or triglyceride (coconut oil) and monoethanolamine or diethanolamine. Usually, a batch system of manufacturing is employed, as shown in Figure 20. 

---