Face-centered-cubic

Face-centered cubic crystals of rare gases are a useful model system due to the simplicity of their interactions. Lattice sites are occupied by atoms interacting via a simple van der Waals potential with no orientation effects. The principal problem is to calculate the net energy of interaction across a plane, such as the one indicated by the dotted line in Fig. VII-4. In other words, as was the case with diamond, the surface energy at 0 K is essentially the excess potential energy of the molecules near the surface. 

Krypton is present in the air to the extent of about 1 ppm. The atmosphere of Mars has been found to contain 0.3 ppm of krypton. Solid krypton is a white crystalline substance with a face-centered cubic structure which is common to all the "rare gases."... 

At 31OC, lanthanum changes from a hexagonal to a face-centered cubic structure, and at 865C it again transforms into a body-centered cubic structure. 

Ytterbium has a bright silvery luster, is soft, malleable, and quite ductile. While the element is fairly stable, it should be kept in closed containers to protect it from air and moisture. Ytterbium is readily attacked and dissolved by dilute and concentrated mineral acids and reacts slowly with water. Ytterbium has three allotropic forms with transformation points at -13oC and 795oC. The beta form is a room-temperature, face-centered, cubic modification, while the... 

Except for helium, all of the elements in Group 18 free2e into a face-centered cubic (fee) crystal stmeture at normal pressure. Both helium isotopes assume this stmeture only at high pressures. The formation of a high pressure phase of soHd xenon having electrical conductivity comparable to a metal has been reported at 33 GPa (330 kbar) and 32 K, and similar transformations by a band-overlap process have been predicted at 15 GPa (150 kbar) for radon and at 60 GPa (600 kbar) for krypton (51). 

Eig. 1. SoHd—Hquid phase diagram for ( ndashrule ) He and (—) He where bcc = body-centered cubic, fee = face-centered cubic, and hep = hexagonal close-packed (53). To convert MPa to psi, multiply by 145. 

Fig. 1. Iron—carbon phase diagram, where a is the body-centered cubic (bcc) a-iron, y is the face-centered cubic y-iron, and Fe C is iron carbide(3 l)...

The stmcture of Pmssian Blue and its analogues consists of a three-dimensional polymeric network of Fe —CN—Fe linkages. Single-crystal x-ray and neutron diffraction studies of insoluble Pmssian Blue estabUsh that the stmcture is based on a rock salt-like face-centered cubic (fee) arrangement with Fe centers occupying one type of site and [Fe(CN)3] units randomly occupying three-quarters of the complementary sites (5). The cyanides bridge the two types of sites. The vacant [Fe(CN)3] sites are occupied by some of the water molecules. Other waters are zeoHtic, ie, interstitial, and occupy the centers of octants of the unit cell. The stmcture contains three different iron coordination environments, Fe C, Fe N, and Fe N4(H20), in a 3 1 3 ratio. 

URANIUM compounds), Pb from the thorium series, and Pb from the actinium series (see Actinides and transactinides). The crystal stmcture of lead is face-centered cubic the length of the edge of the cell is 0.49389 nm the number of atoms per unit cell is four. Other properties are Hsted in Table 1. 

Iron (qv) exists in three aHotropic modifications, each of which is stable over a certain range of temperatures. When pure iron free2es at 1538°C, the body-centered cubic (bcc) 5-modification forms, and is stable to 1394°C. Between 1394 and 912°C, the face-centered cubic (fee) y-modification exists. At 912°C, bcc a-iron forms and prevails at all lower temperatures. These various aHotropic forms of iron have different capacities for dissolving carbon. y-Iron can contain up to 2% carbon, whereas a-iron can contain a maximum of only about 0.02% C. This difference in solubHity of carbon in iron is responsible for the unique heat-treating capabilities of steel The soHd solutions of carbon and other elements in y-iron and a-iron are caHed austenite and ferrite, respectively. 

Elemental composition, ionic charge, and oxidation state are the dominant considerations in inorganic nomenclature. Coimectivity, ie, which atoms are linked by bonds to which other atoms, has not generally been considered to be important, and indeed, in some types of compounds, such as cluster compounds, it caimot be appHed unambiguously. However, when it is necessary to indicate coimectivity, itaUcized symbols for the connected atoms are used, as in trioxodinitrate(A/,A/), O2N—NO . The nomenclature that has been presented appHes to isolated molecules (or ions). Eor substances in the soHd state, which may have more than one crystal stmcture, with individual connectivities, two devices are used. The name of a mineral that exemplifies a particular crystal stmcture, eg, mtile or perovskite, may be appended. Alternatively, the crystal stmcture symmetry, eg, rhombic or triclinic, may be cited, or the stmcture may be stated in a phrase, eg, face-centered cubic. 

Silver chloride crystals are face-centered cubic (fee), having a distance of 0.28 nm between each ion in the lattice. Silver chloride, the most ionic of the halides, melts at 455°C and boils at 1550°C. Silver chloride is very ductile and can be roUed into large sheets. Individual crystals weighing up to 22 kg have been prepared (10). 

Properties. Thallium is grayish white, heavy, and soft. When freshly cut, it has a metallic luster that quickly dulls to a bluish gray tinge like that of lead. A heavy oxide cmst forms on the metal surface when in contact with air for several days. The metal has a close-packed hexagonal lattice below 230°C, at which point it is transformed to a body-centered cubic lattice. At high pressures, thallium transforms to a face-centered cubic form. The triple point between the three phases is at 110°C and 3000 MPa (30 kbar). The physical properties of thallium are summarized in Table 1. 

Calcium has a face-centered cubic crystal stmcture (a = 0.5582 nm) at room temperature but transforms into a body-centered cubic (a = 0.4477 nm) form at 428 2° C (3). Some of the more important physical properties of calcium are given in Table 1. For additional physical properties, see references 7—12. Measurements of the physical properties of calcium are usually somewhat uncertain owing to the effects that small levels of impurities can exert. 

In bulk form cerium is a reactive metal that has a high affinity for oxygen and sulfur. It has a face centered cubic crystal stmcture, mp 798°C, bp 3443°C, density 6.77 g/mL, and a metallic radius of 182 pm. Detailed chemical and physical property information can be found in the Hterature (1,2). 

The electronic stmcture of cobalt is [Ar] 3i/4A. At room temperature the crystalline stmcture of the a (or s) form, is close-packed hexagonal (cph) and lattice parameters are a = 0.2501 nm and c = 0.4066 nm. Above approximately 417°C, a face-centered cubic (fee) aHotrope, the y (or P) form, having a lattice parameter a = 0.3544 nm, becomes the stable crystalline form. The mechanism of the aHotropic transformation has been well described (5,10—12). Cobalt is magnetic up to 1123°C and at room temperature the magnetic moment is parallel to the ( -direction. Physical properties are Hsted in Table 2. 

---