Fabricating products specialized compounding

The formulation of a carrier depends on four considerations (/) the carrier-active chemical compound (2) the emulsifier (J) special additives and (4) environmental concerns. Additional parameters to be considered in the formulation of a carrier product with satisfactory and repeatable performance arise from the equipment in which the dyeing operation is to be carried out. The choice of equipment is usually dictated by the form in which the fiber substrate is to be processed, eg, loose fiber, staple, continuous or texturized filament, woven or knot fabric, yam on packages or in skeins (see Textiles). 

If the compatibilizer is reactive, the rapid and effective melting and mixing will establish the proper conditions for a uniform molten-phase reaction to take place. Thus, by employing TSEs, polymer processors (compounders or product fabricators) can create customized, microstructured polymer systems, which we have coined as designer pellets (22), to best serve the special product property needs of their customers they are no longer solely dependent on polymer resin manufacturers. 

When petroleum or kerosene (as the raw materials for gas oil or lubricants) are purified by using oleum or sulfuric acid, a reaction with the aromatic compounds takes place. While these substances were originally seen as waste products, later their chemical structures and surface-active properties were identified, thus leading to special applications for such products. Nowadays, petroleum fractions with a high content of aromatic hydrocarbons are treated with sulfur trioxide to form alkylaryl sulfonates. These products are then transformed into the sodium, ammonium or alkaline-earth salts. They are soluble in oils and therefore are of some importance as additives in lubricants, oil fuels and corrosion-inhibiting oils. Further more, they are also used as auxiliaries in production of fabrics and as dispersants in enhanced oil recovery processes. 

---