Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Examples of Formulation

General formulation of PVC coated fabric used by railways  [Pg.407]


Some examples of formulations (one of each of the preceding program... [Pg.172]

Lampkin (1997) outlined a typical feeding programme in the UK for meat birds, based on diets with a reduced content of energy, protein and amino acids to result in slower growth than in conventional production. Examples of formulations are shown in Table 5.6. [Pg.213]

Examples of Formulations Compounds for Compression Molded Seals34... [Pg.101]

Our present understanding of formulation of the synthetic organic insecticides for bark beetle control is sketchy. The literature reveals only a few examples of formulation research. Field studies have emphasized the chlorinated hydrocarbon insecticides. [Pg.201]

Examples of formulations which may be good candidates for waivers based on volatility include viscous liquids, waxes, resins, lotions, tree injections, caulks, slow-release collars and ear tags. [Pg.348]

Examples of formulations which may be candidates for waivers based on particle size include microencapsulated formulations which are not biologically available for inhalation during mixing/loading or application, granular products placed in or on the soil, and baits applied by hand. [Pg.348]

A variety of formulations and their modifications are used for producing slabstock urethane foams. The formulation variations are based on available raw materials, foam properties required, product costs and production processes. Examples of formulations for producing free-rise slabstock foam are shown in Tables 16 and 17. A comprehensive list of slabstock formulations has been prepared by Iwata and his co-workers (191). The list is shown in Table 18. [Pg.53]

Examples of formulations for preparing unsaturated polyesters are shown in Table 25. [Pg.86]

Preparation. Urethane-modified isocyanurate foams are mostly fH epared by the one-shot process based on the jH inciple discussed previously in the urethane modification section. The semi-prepolymer process is used only in limited cases because of viscosity problems. This section describes several examples of formulations for producing block foams, slabstock foams, laminate foams, and spray foams. [Pg.97]

Ethylene Glycol-Modified Foams. These foams were studied in detaU by Moss et al (66-69, 72). Examples of formulations are shown below. The following formulation was used for bench-scale one-shot foams. [Pg.98]

Further examples of formulations for instant granules are described in Chapter 3, under Section 3.4.4.3. [Pg.82]

Table 5 Examples of Formulation Types and Used Excipients... Table 5 Examples of Formulation Types and Used Excipients...
There are also examples of formulations that include a dye so that soil can be visualized so as to signal to the consumer when complete cleaning has taken place by the absence of the color [188], Admittedly, some soils, like soap scum and grease, are apparent on light-colored household surfaces mainly by their dulling of the natural shine of a surface. In this case, the dye is sensitive to the presence of protein, so if the soil was a pure grease soil (like many kitchen soils) it would fail to react, whereas it would probably be highly indicative of bathroom soils. [Pg.580]

The recovered broth has to be formulated into a final product to comply with requirements appropriate to its final application. In formulation, whether for a solid or liquid product, different issues are addressed. Maintaining the activity of enzyme from the time of manufacture to the time of application through storage is one of the main factors tested during formulation. Other stability issues such as microbial stability and physical stability are important as well. Depending on the final application of the enzyme, the physical appearance can be customized (e.g., colored). A specific example of formulation is immobilization (see also Chapter 2). [Pg.67]

Formulations Examples of formulations are liquid concentrates, wettable powder, prepacks, granules. [Pg.371]

The formulations given below (in parts by weight) are three examples of typical formulations from the many available, which have been designed to meet specific requirements. Noteworthy points reading the formulations are explained. An example of formulation for reaction injection molding (RIM) and reinforced reaction injection molding (RRIM) is also given,... [Pg.843]

Examples of formulations for specific applications are given in Table 3.9. [Pg.118]

Some other examples of formulations of PVC composites are given in the next section. [Pg.118]

EXAMPLES OF FORMULATIONS Water-based, wallboard adhesive ... [Pg.396]

EXAMPLES OF FORMULATIONS European basic topcoat formulation " "... [Pg.421]

EXAMPLES OF FORMULATIONS Basic formulation of rigid PVC pipe ... [Pg.442]


See other pages where Examples of Formulation is mentioned: [Pg.708]    [Pg.259]    [Pg.595]    [Pg.239]    [Pg.10]    [Pg.32]    [Pg.103]    [Pg.104]    [Pg.2861]    [Pg.595]    [Pg.611]    [Pg.345]    [Pg.599]    [Pg.679]    [Pg.213]    [Pg.389]    [Pg.404]    [Pg.407]    [Pg.410]    [Pg.420]    [Pg.423]    [Pg.426]    [Pg.428]    [Pg.432]    [Pg.436]    [Pg.440]    [Pg.444]   


SEARCH



Example of a General-Purpose Cationic UV Curable Formulation

Example of a UV Coating Formulation

Examples of Form and Formulation

Examples of incorrect formulations

Industrial examples of cosmetics and personal care formulations

© 2024 chempedia.info