Amides epoxides

The presence of hydroxyl groups in the benzylidene sugars does not interfere with the reaction and by-products are usually minor. Suitable solvents other than carbon tetrachloride, include benzene and tetra-chloroethane. Epoxide, amide, and other commonly encountered functionalities in sugar derivatives are unaffected under the reaction conditions. The corresponding 6-bromo-4-benzoates are valuable intermediates... 

Michael Epoxide Amide Diels-Alder Carbene Radical... 

Sodium aluminohydride (NaAlH4, SAH) in THF is somewhat less reactive than LAH toward carboxylic acids, anhydrides, epoxides, amides, and nitro compounds [CBS], and it can be used for selective reductions. However, it is as sensitive to moisture as LAH so similar precautions must be taken. 

Hydrolases are a large family of enzymes whose members catalyze the hydrolytic cleavage of a variety of chemical bonds, including esters, epoxides, amides, acetals, acid anhydrides, and halides. The generalized reaction that is catalyzed by these enzymes is shown in Scheme 18.1 and illustrates the two chemical imperatives of all hydrolytic enzymes ... 

Various enzymes have been used for the hydrolysis of epoxides, amides and nitriles. Some examples are given here. Enzymatic dehydration reaction in water, dehalogenation, as well as halogenation are also discussed. 

Chromium coordination complexes with compounds containing — NH2, — NH—, epoxide, amide, and isocyanate groups [52-54] are also used. Cation active substances such as cationic styrene aminosilanes are recommended by Dow Coming (U.S.) as coupling agents. For example. 

Pheno/Formaldehyde, Urea/Formal-dehyde, Resorcinol/Formaldehyde, Epoxide/Amine, Epoxide/Amide, Polyurethane, Toughened Acrylic, Polyester,... 

Primary and secondary amines also react with epoxides (or in situ produced episulfides )r aziridines)to /J-hydroxyamines (or /J-mercaptoamines or 1,2-diamines). The Michael type iddition of amines to activated C—C double bonds is also a useful synthetic reaction. Rnally unines react readily with. carbonyl compounds to form imines and enamines and with carbo-tylic acid chlorides or esters to give amides which can be reduced to amines with LiAlH (p. Ilf.). All these reactions are often applied in synthesis to produce polycyclic alkaloids with itrogen bridgeheads (J.W. Huffman, 1967) G. Stork, 1963 S.S. Klioze, 1975). 

As a further application of the reaction, the conversion of an endocyclic double bond to an c.xo-methylene is possible[382]. The epoxidation of an cWo-alkene followed by diethylaluminum amide-mediated isomerization affords the allylic alcohol 583 with an exo double bond[383]. The hydroxy group is eliminated selectively by Pd-catalyzed hydrogenolysis after converting it into allylic formate, yielding the c.ro-methylene compound 584. The conversion of carvone (585) into l,3-disiloxy-4-methylenecyclohexane (586) is an example[382]. 

Although acetonitrile is one of the more stable nitriles, it undergoes typical nitrile reactions and is used to produce many types of nitrogen-containing compounds, eg, amides (15), amines (16,17) higher molecular weight mono- and dinitriles (18,19) halogenated nitriles (20) ketones (21) isocyanates (22) heterocycles, eg, pyridines (23), and imidazolines (24). It can be trimerized to. f-trimethyltriazine (25) and has been telomerized with ethylene (26) and copolymerized with a-epoxides (27). 

The zwitterion (6) can react with protic solvents to produce a variety of products. Reaction with water yields a transient hydroperoxy alcohol (10) that can dehydrate to a carboxyUc acid or spHt out H2O2 to form a carbonyl compound (aldehyde or ketone, R2CO). In alcohoHc media, the product is an isolable hydroperoxy ether (11) that can be hydrolyzed or reduced (with (CH O) or (CH2)2S) to a carbonyl compound. Reductive amination of (11) over Raney nickel produces amides and amines (64). Reaction of the zwitterion with a carboxyUc acid to form a hydroperoxy ester (12) is commercially important because it can be oxidized to other acids, RCOOH and R COOH. Reaction of zwitterion with HCN produces a-hydroxy nitriles that can be hydrolyzed to a-hydroxy carboxyUc acids. Carboxylates are obtained with H2O2/OH (65). The zwitterion can be reduced during the course of the reaction by tetracyanoethylene to produce its epoxide (66). 

Potassium Amides. The strong, extremely soluble, stable, and nonnucleophilic potassium amide base (42), potassium hexamethyldisilazane [40949-94-8] (KHMDS), KN [Si(CH2]2, pX = 28, has been developed and commercialized. KHMDS, ideal for regio/stereospecific deprotonation and enolization reactions for less acidic compounds, is available in both THF and toluene solutions. It has demonstrated benefits for reactions involving kinetic enolates (43), alkylation and acylation (44), Wittig reaction (45), epoxidation (46), Ireland-Claison rearrangement (47,48), isomerization (49,50), Darzen reaction (51), Dieckmann condensation (52), cyclization (53), chain and ring expansion (54,55), and elimination (56). 

Other substitution reactions have been described with ketones, epoxides, anhydrides, acyl haUdes, amides, and imidates, among others (4). 

Me3SiI, CH2CI2, 25°, 15 min, 85-95% yield.Under these cleavage conditions i,3-dithiolanes, alkyl and trimethylsilyl enol ethers, and enol acetates are stable. 1,3-Dioxolanes give complex mixtures. Alcohols, epoxides, trityl, r-butyl, and benzyl ethers and esters are reactive. Most other ethers and esters, amines, amides, ketones, olefins, acetylenes, and halides are expected to be stable. 

The great reactivity of the sulfurane prepared by this procedure toward active hydrogen compounds, coupled with an indefinite shelf life in the absence of moisture, makes this compound a useful reagent for dehydrations,amide cleavage reactions, epoxide formation, sulfilimine syntheses, and certain oxidations and coupling reactions. 

Lithium aluminum hydride (LiAlH4) is the most powerful of the hydride reagents. It reduces acid chlorides, esters, lactones, acids, anhydrides, aldehydes, ketones and epoxides to alcohols amides, nitriles, imines and oximes to amines primary and secondary alkyl halides and toluenesulfonates to... 

The present authors have found that the preparation of 7V-acetyl aziridine derivates provides the most secure method of differentiating aziridines from primary amines which are alternate reaction products in a number of cases. The infrared spectra of the former derivatives show only a peak at 1690 cm" for a tertiary amide peaks at ca. 3440 and 1530 cm" indicative of a secondary amide are absent. Acetylation also shifts the aziridine ring protons to a lower field in the NMR by ca. 1 ppm relative to the parent aziridine. The A"-acetyl aziridines are hydrolyzed with 3% methanolic potassium hydroxide. " Published NMR spectra of several 16j5,17j -aziridines reveal resonance patterns resembling those of the respective epoxides. " ... 

Alkylation of enamines with epoxides or acetoxybromoalkanes provided intermediates for cyclic enol ethers (668) and branched chain sugars were obtained by enamine alkylation (669). Sodium enolates of vinylogous amides underwent carbon and nitrogen methylation (570), while vicinal endiamines formed bis-quaternary amonium salts (647). Reactions of enamines with a cyclopropenyl cation gave alkylated imonium products (57/), and 2-benzylidene-3-methylbenzothiazoline was shown to undergo enamine alkylation and acylation (572). A cyclic enamine was alkylated with methylbromoacetate and the product reduced with sodium borohydride to the key intermediate in a synthesis of the quebrachamine skeleton (57i). 

An a ,/3-epoxycarboxylic ester (also called glycidic ester) 3 is formed upon reaction of a a-halo ester 2 with an aldehyde or ketone 1 in the presence of a base such as sodium ethoxide or sodium amide. Mechanistically it is a Knoevenagel-type reaction of the aldehyde or ketone 1 with the deprotonated a-halo ester to the a-halo alkoxide 4, followed by an intramolecular nucleophilic substitution reaction to give the epoxide 3 ... 

Replacement of the carbamate function by an amide seems to be compatible with meprobamate-like activity in a compound formally derived from a 1,2-glycol. Oxidation of the commercially available aldehyde, 22, under controlled conditions affords the corresponding acid (23). This is then converted to its amide (24) via the acid chloride. Epoxidation by means of perphthalic acid affords oxanamide (25). ... 

A retrosynthetic analysis of fragment 152 can be completed through cleavage of the C16-C17 bond in enone 155, the projected precursor of epoxide 152. This retrosynthetic maneuver furnishes intermediates 156 and 157 as potential building blocks. In the forward sense, acylation of a vinyl metal species derived from 156 with Weinreb amide 157 could accomplish the construction of enone 155. Iodide 153, on the other hand, can be traced retrosynthetically to the commercially available, optically active building block methyl (S)-(+)-3-hydroxy-2-methyIpropionate (154). 

N,O-acetal intermediate 172, y,<5-unsaturated amide 171. It is important to note that there is a correspondence between the stereochemistry at C-41 of the allylic alcohol substrate 173 and at C-37 of the amide product 171. Provided that the configuration of the hydroxyl-bearing carbon in 173 can be established as shown, then the subsequent suprafacial [3,3] sigmatropic rearrangement would ensure the stereospecific introduction of the C-37 side chain during the course of the Eschenmoser-Claisen rearrangement, stereochemistry is transferred from C-41 to C-37. Ketone 174, a potential intermediate for a synthesis of 173, could conceivably be fashioned in short order from epoxide 175. 

The hydrogeh atom bound to the amide nitrogen in 15 is rather acidic and it can be easily removed as a proton in the presence of some competent base. Naturally, such an event would afford a delocalized anion, a nucleophilic species, which could attack the proximal epoxide at position 16 in an intramolecular fashion to give the desired azabicyclo[3.2.1]octanol framework. In the event, when a solution of 15 in benzene is treated with sodium hydride at 100 °C, the processes just outlined do in fact take place and intermediate 14 is obtained after hydrolytic cleavage of the trifluoroacetyl group with potassium hydroxide. The formation of azabi-cyclo[3.2.1]octanol 14 in an overall yield of 43% from enone 16 underscores the efficiency of Overman s route to this heavily functionalized bicycle. 

There have been two general approaches to the direct asymmetric epoxidation of carbonyl-containing compounds (Scheme 1.2) ylide-mediated epoxidation for the construction of aryl and vinyl epoxides, and a-halo enolate epoxidation (Darzens reaction) for the construction of epoxy esters, acids, amides, and sulfones. 

Epoxy Esters, Amides, Acids, Ketones, and Sulfbnes 1.2.3.1 Sulfur Ylide-mediated Epoxidation... 

In general sulfur ylide-mediated epoxidation cannot be used to form an epoxide with an adjacent anion-stabilizing group such as an ester, as the requisite ylide is too stable and does not react with aldehydes [23], With the less strongly electron-withdrawing amide group, however, the sulfur ylide possesses sufficient reactivity for epoxidation. The first example of an asymmetric version of this reaction was by... 

Dai and co-workers, who used sulfonium salt 34 in epoxidation reactions to give glycidic amides (Scheme 1.15) [23]. 

---