Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Enyne cycloisomerizations enynes

Another useful class of palladium-catalyzed cycloisomerizations is based on the general mechanistic pathway shown in Scheme 13. In this chemistry, a hydridopalladium acetate complex is regarded as the catalytically active species.27b-29 According to this pathway, coordination of a generic enyne such as 59 to the palladium metal center facilitates a hydropalladation reaction to give intermediate 60. With a pendant alkene, 60 can then participate in a ring-form-... [Pg.578]

Fiirstner A, Martin R, Majima K (2005) Cycloisomerization of enynes catalyzed by iron (0)—ate complexes. J Am Chem Soc 127 12236-12237... [Pg.171]

Complex 38 also turned out to be an efficient catalyst for cycloisomerization reactions of enynes 41 (Scheme 8) [16, 17]. This seems reasonable if one considers the fact that Fe(0) is isoelectronic to Rh(+1), which is also a catalyst for Alder-ene cycloisomerizations [18, 19]. [Pg.187]

Scheme 9 Enyne cycloisomerization catalyzed by different Fe(0)-ate complexes 38-40 E = COOEt [17]... Scheme 9 Enyne cycloisomerization catalyzed by different Fe(0)-ate complexes 38-40 E = COOEt [17]...
With regard to the mechanism of the cycloisomerization, Fiirstner et al. found strong evidence of a metallacyclic intermediate. By labeling the allylic position of enynes 46 and 48, they showed that reactions yielding traws-annulated rings 47 transferred the deuterium atom to the exocychc double bond (eq. 1 in Scheme 10), whereas c -annulated rings 49 formed with complete preservation of the position of the deuterium atom (eq. 2 in Scheme 10). This corresponds well to a metallacycUc... [Pg.188]

One productive facet of Pd-catalyzed domino reactions is the cycloisomerization of enynes and allenes, as shown by Trost and coworkers [19]. Thus, transformation of the dienyne 6/1-10 using Pd(OAc)2 led to 6/1-13 in 72% yield, in which the last step is a Diels-Alder reaction of the intermediate 6/1-12 (Scheme 6/1.2). [Pg.361]

Fiirstner and coworkers developed a new Pt- and Au-catalyzed cycloisomerization of hydroxylated enynes 6/4-141 to give the bicylo[3.1.0]hexanone skeleton 6/4-143, which is found in a large number of terpenes [317]. It can be assumed that, in the case of the Pt-catalysis, a platinum carbene 6/4-142 is formed, which triggers an irreversible 1,2-hydrogen shift. The complexity of the product/substrate relationship can be increased by using a mixture of an alkynal and an allyl silane in the presence of PtCl2 to give 6/4-143 directly, in 55 % yield (Scheme 6/4.36). [Pg.480]

Michael additions of 7r-allyl species to alkynes were employed for the synthesis of elaborated carbocycles as in the ruthenium-catalyzed cycloisomerization of 1,6-enynes (Equation (188)).1... [Pg.156]

It should also be mentioned that very recently, a new cycloisomerization of enynes has been shown to proceed via a rhodium-vinylidene complex,187 which, after [2 + 2]-cycloaddition and ring opening of a rhodacyclobutane, furnishes versatile cyclic dienes (Scheme 47).188 Not only does this constitute a fifth mechanistic pathway, but it also opens new opportunites for C-C bond constructions. [Pg.324]

Recently, Mikami has also obtained high ee s for the cycloisomerization of related 1,6-enynes,220 using Rh(l)... [Pg.327]

Trost has shown some mechanistic dichotomy in the ruthenium(ll)-catalyzed enyne cycloisomerization.233 Thus, as mentioned above, the cyloisomerization of enynes proceeds well for the formation of five- or six-membered ring for a variety of precursors. In sharp contrast, in the case of 1,6-enynoates with a quaternary propargylic position, a seven-membered ring is produced in good yield (Scheme 58). [Pg.329]

The third pathway for the cycloisomerization of l, -enynes is the transformation that involves a vinylmetal intermediate (Scheme 61). [Pg.329]

Next, the cycloisomerization of l, -enynes involving a vinylmetal species originating from the hydro-, hetero-, or carbometallation of the acetylene moiety in the first step is summarized. [Pg.331]

Ruthenium hydride catalysts can also initiate a variety of cycloisomerizations of 1,5- and 1,6-enynes as well as dienes, as exemplified by the RuClH(CO)(PPh3)3-catalyzed reactions shown in Scheme 64.249... [Pg.331]

The skeletal rearrangements are cycloisomerization processes which involve carbon-carbon bond cleavage. These reactions have witnessed a tremendous development in the last decade, and this chemistry has been recently reviewed.283 This section will be devoted to 7T-Lewis acid-catalyzed processes and will not deal, for instance, with genuine enyne metathesis processes involving carbene complex-catalyzed processes pioneered by Katz284 and intensely used nowadays with Ru-based catalysts.285 By the catalysis of 7r-Lewis acids, all these reactions generally start with a metal-promoted electrophilic activation of the alkyne moiety, a process well known for organoplatinum... [Pg.336]

Trost and others have extensively studied the ruthenium-catalyzed intermolecular Alder-ene reaction (see Section 10.12.3) however, conditions developed for the intermolecular coupling of alkenes and alkynes failed to lead to intramolecular cycloisomerization due the sensitivity of the [CpRu(cod)Cl] catalyst system to substitution patterns on the alkene.51 Trost and Toste instead found success using cationic [CpRu(MeCN)3]PF6 41. In contrast to the analogous palladium conditions, this catalyst gives exclusively 1,4-diene cycloisomerization products. The absence of 1,3-dienes supports the suggestion that the ruthenium-catalyzed cycloisomerization of enynes proceeds through a ruthenacycle intermediate (Scheme 11). [Pg.572]

The Alder-ene cyclization of allylic silyl ethers represents a clever use of cycloisomerization chemistry, as the enol ether products can be easily unmasked to yield aldehydes. Palladium-catalyzed cycloisomerization of 1,6- and 1,7-enynes containing an allylic oxygen most often gives rise to 1,3-dienes (see Section 10.12.4.1). However, enynes of type 63 underwent facile Alder-ene cyclization to the corresponding five- or six-membered rings (Equation (40)) using both [CpRu(MeCN)3]PF6 41 and the Cp analog ([Cp Ru(MeCN)3]PF6, 64).53... [Pg.573]

Diastereoselectivity was observed as the result of stereoinduction (Equation (41)), giving preferential formation of the 1,2-trans products. Enhancement of the diastereoselectivity in the cycloisomerization of enyne 65a n= 1) was observed with the use of the catalyst bearing the sterically demanding Cp ligand 64. [Pg.573]

Trost and Toste51 isolated unexpected cycloheptene 69 upon exposing enyne 68 to their optimized ruthenium-based Alder-ene conditions (Equation (42)). Further exploration into the effects of quaternary substitution at the propargylic carbon revealed the ability of ruthenium to catalyze a non-Alder-ene cycloisomerization to form seven-membered rings, presumably via allylic C-H activation (Scheme 15). [Pg.574]

Zhang54 published the first and only account of a non-asymmetric rhodium-catalyzed Alder-ene cycloisomerization of 1,6-enynes.55 The conditions developed by Zhang and co-workers are advantageous in that, similar to the ruthenium conditions developed by Trost, selectivity for 1,4-diene products is exhibited. The rhodium conditions are dissimilar from many other transition metal conditions in that only (Z)-olefins give cycloisomerization products. [Pg.575]

Stereoinduction was observed, as in the formation of 74 (Equation (46)) as a single diastereomer 1,3-stereo-induction was not successful. Most substrates contained only methyl-substituted olefins, leading to terminal alkenes. In the case of the cycloisomerization of an //-propyl-substituted enyne, a modicum of selectivity with respect to olefin geometry was exhibited 73 was produced in an isomeric ratio of 1 3.5. The authors do not specify whether the (E)- or (Z)-geometry was preferred. [Pg.577]

Incorporation of the carboxylic acid group into the substrate also had an effect on the stereochemistry of the Alder-ene products. Trost and Gelling60 observed diastereoselectivity in the palladium-catalyzed cycloisomerization of 1,7-enynes when the reactions were conducted in the presence of A,A-bis(benzylidene)ethylene diamine (BBEDA, Figure 2). They were able to synthesize substituted cyclohexanes possessing vicinal (Equation (53)) and... [Pg.579]

An intramolecular palladium-catalyzed cycloisomerization of enyne 170 was used to access the antifungal agent, chokol C (Scheme 43).102 The choice of ligand and catalyst was essential to the efficiency of the Alder-ene reaction. Enone 171 was obtained as a single olefinic isomer resulting from migration of only Ha during the cycloisomerization reaction. [Pg.597]

Kibayashi and co-workers103 implemented the palladium-catalyzed cycloisomerization reaction in a stereoselective total synthesis of enantiomerically pure (+)-streptazolin. The cycloisomerization of enyne 172 to provide diene 173 was remarkably selective when performed in the presence of A,Ar -bis(benzylidene)ethylenediamine (BBEDA) as a ligand and water as a proton source (Scheme 44). [Pg.597]

Enantioselective hydrogenation of 1,6-enynes using chirally modified cationic rhodium precatalysts enables enantioselective reductive cyclization to afford alky-lidene-substituted carbocycles and heterocycles [27 b, 41, 42]. Good to excellent yields and exceptional levels of asymmetric induction are observed across a structurally diverse set of substrates. For systems that embody 1,2-disubstituted alkenes, competitive /9-hydride elimination en route to products of cycloisomerization is observed. However, related enone-containing substrates cannot engage in /9-hydride elimination, and undergo reductive cyclization in good yield (Table 22.12). [Pg.733]

Rh(III)-metallocydes derived from 1,6-enynes are postulated as reactive intermediates in catalytic [4+2] and [5+2] cycloadditions, Pauson-Khand reactions and cycloisomerizations P. Cao, B. Wang, X. Zhang, J. Am. Chem. Soc. 2000, 122, 64901 and references cited therein. [Pg.739]

For reviews encompassing the Pd-cata-lyzed cycloisomerization and reductive cydization of 1,6-enynes, see (a) B.M. Trost, Acc. Chem. Res. 1990, 23, 34 ... [Pg.740]

For selected examples of the cycloisomerization of 1,6-enynes catalyzed by metals other than palladium, see (a) Titanium ... [Pg.740]

For an excellent review covering enantio-selective metal-catalyzed cycloisomerization of 1,6- and 1,7-enynes, see I.J.S. Fairlamb, Angew. Chem. Int. Ed. 2004,... [Pg.740]

For rhodium-catalyzed enantioselective enyne cycloisomerization and hydrosily-lation-cyclization, see (a) C. Ping,... [Pg.740]


See other pages where Enyne cycloisomerizations enynes is mentioned: [Pg.146]    [Pg.146]    [Pg.146]    [Pg.147]    [Pg.249]    [Pg.229]    [Pg.192]    [Pg.153]    [Pg.254]    [Pg.325]    [Pg.326]    [Pg.326]    [Pg.331]    [Pg.346]    [Pg.506]    [Pg.509]    [Pg.576]    [Pg.580]    [Pg.581]    [Pg.582]    [Pg.598]   
See also in sourсe #XX -- [ Pg.206 , Pg.211 , Pg.212 , Pg.222 ]




SEARCH



Cycloisomerism

Cycloisomerization

Cycloisomerizations

Cycloisomerizations 1.5- enynes

Enynes

Enynes cycloisomerization

© 2024 chempedia.info