Engineering science testing

Font, R. and Laveda, M.L., 1996. Design method of continuous thickeners from semibatch tests of sedimentation. Chemical Engineering Science, 51, 5007-5015. 

Downey et al., of Parsons Engineering Science, Inc., reported costs for bioventing at a diesel-fuel-contaminated site in Nebraska as 112,000, or less than 10/m of soil treated. This cost included pilot testing, full-scale installation, and 2 years of operation and maintenance but did not include the cost of electricity (estimated at 280 per month) or labor costs for system checks. It is noted that bioventing provides significant economy of scale and that costs for sites smaller than 11,000 m are typically in the range of 10 to 30/m (D151508, p. 124). 

Bourne, J. R., Kozichi, F. and Rys, P. (1981). Mixing and fast chemical reaction—I Test reactions to determine segregation. Chemical Engineering Science, 36(10) 1643- 1648. 

Townsend, T., Jang, Y. C., and Tolaymat, T. (2003). A Guide to the Use of Leaching Tests in Solid Waste Management Decision Making, Gainesville, Department of Environmental Engineering Sciences, University of Florida, FL, 1-31. 

Bove, S., Solberg, T. Hjertager, B. H. 2005 A novel algorithm for solving population balance equations the parallel parent and daughter classes. Derivation, analysis and testing. Chemical Engineering Science 60, 1449-1464. 

Douglas Aircraft Co., Santa Monica CA, taking then over as professor of engineering science at California Institute of Technology, Pasadena CA, till retirement in 1978. He was in parallel consultant to industrial firms, notably the Naval Ordnance Test Station,... 

The development of the field of environmental engineering science has been dependent on the development of the BOD concept and test. The names of Phelps, Streeter, and Butterfield are prominent in the development of the BOD concept. The primary interest of these early workers was to determine the dissolved oxygen (DO) profile in the receiving stream in response to a known dilution of waste-water. The interest was in determining the capacity of the receiving stream to assimilate organic wastes. 

Take exemplary, substantive content of the traditiontd under-graduate engineering program - the engineering sciences, the laboratory tests, the design projects - and subject this to study from the perspective of humanities, arts, and the social sciences. (Bucciarelli 2011,... 

This test method is under the jurisdiction of Committee D-2 on Petroleum Products and Lubricants and is the direct responsibility of Subcommittee D02.11 on Engineering Sciences of High Performance Fluids and Solids. 

Turek, E., On the Tensile Testing of High Modulus Polymers and the Compliance Correction , Polymers Engineering Science, Vol.33,1993, pp. 328-333. 

In order to balance public domain science with a high quality commercial software product it has been necessary for us to reimplement almost every aspect of computational chemistry embodied in HyperChem. All HyperChem source code is written in C or C-t-t, specified, designed, and implemented by Hyper-Chem s developers. We have stood on the scientific shoulders of giants, but we have not used their FORTRAN code Thus, although we have had access to MOPAC and other public domain codes for testing and other purposes, HyperChem computes MINDO, MNDO, and AMI wave functions, for example, with HyperChem code, not MOPAC code. We have made the effort to implement modern chemical science in a modern software-engineered product. 

---