Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Empty project

We will start with a new empty project. Select File, New, and the Project from the menus ... [Pg.76]

Click the OK button. You will return to the empty project ... [Pg.472]

You can close and delete this empty project if you wish. The libraries are now configured to use the subcircuit. [Pg.472]

We can see, therefore, that in a certain sense it is good luck that the UHF or closed-shell SCF process can be solved uniquely without the involvement of the additional off-diagonal terms in the Fock matrix. If there is only one occupied shell then the empty shell is uniquely determined. Expressing the stationary condition in terms of the occupied-empty projection of the Fock matrix is formally correct but not useful. [Pg.294]

In general, the test object caimot be heated above its operating temperature in space. As free molecular conditions are obtained around the object, it outgases and, if solar-spectmm photons impinge on the object, increases the release of gas. Because the object is in a vessel and the area of the hole lea ding to the gas pump is small compared with the projected interior area of the vessel, molecules originating from the test object can return to the test object provided that they do not interact in some manner with the vessel walls and the other components of the molecular environment. The object inside the vessel estabhshes an entirely different system than the clean, dry, and empty vacuum vessel. The new system no longer has the capabiUty to reach the clean, dry, and empty base pressure within a reasonable time. [Pg.368]

Parts of the tank were projected to distances up to 360 m (1200 ft). Twenty-two pieces of the tank were recovered, constituting approximately 80% of the original tank. Debris was found clustered in two separate areas, namely, within the radii of 5° to 20° and 65° to 95° from the car s direction of movement. Three empty tank cars located up to a distance of three railroad tracks from the exploded car were blown from the rails. The undercarriage of the car was bent into a V-shape (see Figure 2.1). One person was killed in the explosion. Analysis of a recovered piece of the tank car showed that failure was due to brittle fracture. [Pg.27]

If some fields may be empty in the sublevels, all the fields in the main level are required for each entry. A new chiral separation record can be added in CHIRBASE solely if the authors correctly identify both sample and CSP. Since the beginning of the project, our policy has been to contact the authors of all publications containing incomplete, ambiguous or inconsistent data and to ask for additional information. Providing the separations with unique case numbers helps us considerably in this essential task, and also facilitates avoiding redundancies in the database. When chiral separations are reported for the second time in a new publication with exactly the same chromatographic conditions, this is stated in a footnote added in the field comments . In this field, miscellaneous information that cannot appear elsewhere are listed (detection limit, description of a reported chromatogram, racemization study, mobile phase limitations, etc.). [Pg.98]

It is quite common for a Catalysis project leader to set up a structure of empty packages and use them to enter stub specifications, designs, and relations (such as refinements) between them that must be completed in downstream development. These packages also need an appropriate build mechanism that traverses and evaluates the contents of each package, generating results that will be checked, compiled, and linked. [Pg.548]

Ti is calculated to have a delocalized d band in /-Lii/2Ti02. This is reflected by each Ti holding a +3.5 charge. In /-Ti02, Ti is calculated to have an empty d band and a +4 valence. At both Li concentrations the tetrahedral Ti is +4 and the projected change in LFSE and SPE for Ti moving from octahedral to tetrahedral coordination is zero. This is consistent with Ti having a relatively low calculated value for Ai oct-tet (fourth lowest in Table 2 and third lowest in Table 3). [Pg.289]

Although the occupied orbitals are of main importance, since they are directly involved in the formation of the chemical bond, the unoccupied states also provide complementary information. In X-ray absorption spectroscopy (XAS), often denoted Near Edge X-ray Absorption Fine Structure (NEXAFS), we excite a core electron to the empty states above the Fermi level [3,4,13]. There is a close connection between XES and XAS where the former gives information on the occupied orbitals while the latter relates to the character and symmetry of the unoccupied levels. Both are governed by the dipole selection rule and the localized character of the core orbitals allows a simple atom-specific projection of the electronic structure the major difference is in the final states. In XAS the empty electronic states are probed... [Pg.60]

Fig. 2.58 Structure of FcjC (cementite)-type, (3, 3)hcp Fej C , projected on (001). Large circles are metal atoms and small ones are carbon atoms. Heights are in units of c/100. On the left are drawn the M C prisms and on the right the empty Mg octahedra. The arrows indicate the twin planes. The unit cell is outlined. Fig. 2.58 Structure of FcjC (cementite)-type, (3, 3)hcp Fej C , projected on (001). Large circles are metal atoms and small ones are carbon atoms. Heights are in units of c/100. On the left are drawn the M C prisms and on the right the empty Mg octahedra. The arrows indicate the twin planes. The unit cell is outlined.
The projection from the locus coeruleus to limbic cortex may regulate emotions, as well as energy, fatigue, and psychomotor agitation or psychomotor retardation (Fig. 5—26). A projection to the cerebellum may regulate motor movements, especially tremor (Fig. 5—27). Brainstem norepinephrine in cardiovascular centers controls blood pressure (Fig. 5—28). Norepinephrine from sympathetic neurons leaving the spinal cord to innervate peripheral tissues control heart rate (Fig. 5—29) and bladder emptying (Fig. 5—30). [Pg.162]

The analytical laboratory prepares the trip blanks and ships them to the project site in a cooler together with empty sample containers. The laboratory is responsible for ensuring that the trip blank and the provided empty sample containers are analyte-free. In the field, the trip blanks are kept together with sample containers and, after the samples have been collected, with the samples. Trip blank vials are never opened in the field. [Pg.66]


See other pages where Empty project is mentioned: [Pg.4]    [Pg.4]    [Pg.547]    [Pg.9]    [Pg.384]    [Pg.117]    [Pg.435]    [Pg.166]    [Pg.263]    [Pg.192]    [Pg.52]    [Pg.74]    [Pg.204]    [Pg.250]    [Pg.118]    [Pg.828]    [Pg.288]    [Pg.114]    [Pg.859]    [Pg.126]    [Pg.5]    [Pg.126]    [Pg.155]    [Pg.6]    [Pg.61]    [Pg.647]    [Pg.1035]    [Pg.17]    [Pg.454]    [Pg.313]    [Pg.366]    [Pg.124]    [Pg.170]    [Pg.329]    [Pg.37]    [Pg.96]   
See also in sourсe #XX -- [ Pg.4 ]




SEARCH



Emptiness

Empty

© 2024 chempedia.info