Embedded passives inductors

The trend in surface-mount technology is to use smaller passive devices such as capacitors, resistors, and inductors. Also, there is the use of embedded passive devices, that is, resistors and capacitors that are located within the circuit board laminate. Embedded passive devices free up additional surface area for larger, active components. 

Magnetically active nanocomposites can function as passive magnetic devices because nanocomposites control inductance of the circuitry. Magnetic nanocomposites can be embedded into an epoxy matrix to provide passive magnetic devices such as inductors, antennas and transformers. 

A surface-mounted LTCC RF band-pass filter (bottom half of Figure 1.11) operates at 942 MHz and, by embedding inductors and capacitors in the 17-layer structure, replaces 9 individual passive components (top half of Figure 1.11). Some layers in the stackup are 50 pm (2 mil) thick for use as the capacitor dielectrics. This filter was designed for cellular phone applications and significantly reduced board space over its discrete equivalent. In addition, assembly time was reduced and, with fewer solder joints for this function, reliability was improved. 

This module (Figure 1.24) is an antenna switch/filter module designed for dual-band portable wireless telephones. It combines GSM/DCS/PCS diplex-ing and receiving/transmitting antenna functions. The 8.9 x 9.9 mm (0.35 x 0.39 in.) LTCC module uses a 26-pad EGA format. In addition to the surface-mounted passive components, the six-conductor-layer structure incorporates 13 embedded capacitors and inductors to form the diplexer and 2 low-pass filters. 

Passive integration is an effective technique to increase the component density. It is defined as a combination of circuit carrier (substrate, board, and interconnections) with passive components like resistors, capacitors, inductors, and line elements in one technology. Passive elements may be integrated on the surface or embedded in a multilayer structure of the substrate. The goal is to achieve ... 

---