Eloxal process

ANODIC OXIDATION. Oxidation is defined not only as reaction with oxygen, but as any chemical reaction attended by removal of electrons. Therefore, when current is applied to a pair of electrodes so as to make them anode and cathode, the former can act as a continuous remover of electrons and hence bring about oxidation (while the latter will favor reduction since it supplies electrons). This anodic oxidation is utilized in industry for various purposes, One of tire earliest to be discovered (H, Kolbe. 1849) was the production of hydrocarbons from aliphatic acids, or more commonly, from their alkali salts. Many other substances may be produced, on a laboratory scale or even, in some cases, on an economically sound production scale, by anodic oxidation. The process is also widely used to impart corrosion-resistant or decorative (colored) films to metal surfaces. For example, in the anodization or Eloxal process, the protection afforded by the oxide film ordinarily present on the surface of aluminum articles is considerably increased by building up this film by anodic oxidation. 

Oxidation can be viewed as the chemisorption of oxygen. For example, nickel and silicon are oxidized at ambient conditions. The resulting oxide layer is thermodynamically more stable and passivates the pure material below it. Another important example is the oxidation of aluminum which provides the metal with a very hard roughly 100 nm thick aluminum oxide (AI2O3) layer. To stabilize the aluminum surface even more and to passivate it against reactive chemicals the thickness of the oxide layer can be increased electrochemically. This procedure is called the eloxal process (efectrolytical oxidation of a/uminum). 

Eloxal process. These oxide films typically have a porous structure with a hexagonal pore arrangement. The pores can be used for coloring the metal surface and as templates for forming nanostructures. A high order can be achieved. ... 

For some metals an intrinsic inorganic coating can be produced by anodic oxidation and the formation of a thick surface oxide layer. One example is aluminum oxidation by the Eloxal process. 

Eloxal [Electrolytic oxidation of aluminium] An electrolytic process for applying an oxide film to the surface of aluminum in order to protect it from further oxidation or to make it capable of adsorbing a dyestuff. 

---