Elimination carboxylic acids

The reaction of alkenyl mercurials with alkenes forms 7r-allylpalladium intermediates by the rearrangement of Pd via the elimination of H—Pd—Cl and its reverse readdition. Further transformations such as trapping with nucleophiles or elimination form conjugated dienes[379]. The 7r-allylpalladium intermediate 418 formed from 3-butenoic acid reacts intramolecularly with carboxylic acid to yield the 7-vinyl-7-laCtone 4I9[380], The /i,7-titisaturated amide 421 is obtained by the reaction of 4-vinyl-2-azetidinone (420) with an organomercur-ial. Similarly homoallylic alcohols are obtained from vinylic oxetanes[381]. 

Carboxylic acids react with butadiene as alkali metal carboxylates. A mixture of isomeric 1- and 3-acetoxyoctadienes (39 and 40) is formed by the reaction of acetic acid[13]. The reaction is very slow in acetic acid alone. It is accelerated by forming acetate by the addition of a base[40]. Addition of an equal amount of triethylamine achieved complete conversion at 80 C after 2 h. AcONa or AcOK also can be used as a base. Trimethylolpropane phosphite (TMPP) completely eliminates the formation of 1,3,7-octatriene, and the acetoxyocta-dienes 39 and 40 are obtained in 81% and 9% yields by using N.N.N M -tetramethyl-l,3-diaminobutane at 50 in a 2 h reaction. These two isomers undergo Pd-catalyzed allylic rearrangement with each other. 

Until now we have been discussing the kinetics of catalyzed reactions. Losses due to volatility and side reactions also raise questions as to the validity of assuming a constant concentration of catalyst. Of course, one way of avoiding this issue is to omit an outside catalyst reactions involving carboxylic acids can be catalyzed by these compounds themselves. Experiments conducted under these conditions are informative in their own right and not merely as means of eliminating errors in the catalyzed case. As noted in connection with the discussion of reaction (5.G), the intermediate is stabilized by coordination with a proton from the catalyst. In the case of autoprotolysis by the carboxylic acid reactant, the rate-determining step is probably the slow reaction of intermediate [1] ... 

Practically all pyridazine-carboxylic and -polycarboxylic acids undergo decarboxylation when heated above 200 °C. As the corresponding products are usually isolated in high yields, decarboxylation is frequently used as the best synthetic route for many pyridazine and pyridazinone derivatives. For example, pyridazine-3-carboxylic acid eliminates carbon dioxide when heated at reduced pressure to give pyridazine in almost quantitative yield, but pyridazine is obtained in poor yield from pyridazine-4-carboxylic acid. Decarboxylation is usually carried out in acid solution, or by heating dry silver salts, while organic bases such as aniline, dimethylaniline and quinoline are used as catalysts for monodecarboxylation of pyridazine-4,5-dicarboxylic acids. 

Another factor which strongly affects the reactivity of these carboxylic acid derivatives is the leaving-group abihty of the substituents. The order is Cl > OAr > OR > NR2 > 0 so that not only does the ease of forming the tetrahedral intermediate decrease in the order Cl>0Ar>0R>NR2>0 , but the tendency for subsequent elimination to occur is also in the same order. Because the two factors work together, there are large differences in reactivity toward the nucleophiles. 

Hydrolysis of aspirin in H2 0 leads to no incorporation of into the product salicylic acid, ruling out the anhydride as an intermediate and thereby excluding mechanism 1. The general acid catalysis of mechanism III can be ruled out on the basis of failure of other nucleophiles to show evidence for general acid catalysis by the neighboring carboxylic acid group. Because there is no reason to believe hydroxide should be special in this way, mechanism III is eliminated. Thus, mechanism II, general base catalysis of hydroxide-ion attack, is believed to be the correct description of the hydrolysis of aspirin. 

The two-component waterborne urethanes are similar in nature to the one-component waterborne urethanes. In fact, many one-component PUD s may benefit from the addition of a crosslinker. The two-component urethanes may have higher levels of carboxylic acid salt stabilizer built into the backbone than is actually needed to stabilize the urethane in water. As a result, if these two-component urethane dispersions were to be used as one-component adhesives by themselves (without crosslinker), they would show very poor moisture resistance. When these two-component urethane dispersions are used in conjunction with the crosslinkers listed in Fig. 8, the crosslinkers will react with the carboxylic pendant groups built into the urethane, as previously shown in the one-component waterborne urethane section. This accomplishes two tasks at the same time (1) when the crosslinker reacts with the carboxylic acid salt, it eliminates much of the hydrophilicity associated with urethane dispersion, and (2) it crosslinks the dispersion, which imparts solvent and moisture resistance to the urethane adhesive (see phase V in Fig. 5). As a result of crosslinking, the physical properties may be modified. For example, the results may be an increase in tensile properties and a decrease in elongation. Depending upon the level of crosslinking, the dispersion may lose the ability to be repositionable. (Many of the one-component PUD s may... 

An interesting class ot covalent Inflates are vin l and ar>/ or heteroaryl Inflates Vinyl inflates are used for the direct solvolytic generation of vinyl cations and for the generation of unsaturated carbenes via the a-elimination process [66] A triflate ester of 2-hydroxypyridine can be used as a catalyst for the acylation of aromatic compounds with carboxylic acids [109] (equation 55)... 

By oxidation with chromic acid, this is converted into cyclohexanone-3-carboxylic acid, in which the —CH. OH— group is converted into the —CO— group. This is converted into its ethyl ester and treated with magnesium methyl iodide, and the product, on hydrolysis, yields l-methyl-cyclohexane-l-ol-3-carboxylic acid, which is converted byhydro-bromic acid into 1-bromo-l - methyl - cyclohexane - 3 - carboxylic acid. When this is digested with pyridine, hydrobromic acid is eliminated and yields l-methyl-A -cyclohexane-3-carboxylic acid of the formula—... 

As a general rule, nucleophilic addition reactions are characteristic only of aldehydes and ketones, not of carboxylic acid derivatives. The reason for the difference is structural. As discussed previously in A Preview of Carbonyl Compounds and shown in Figure 19.14, the tetrahedral intermediate produced by addition of a nucleophile to a carboxylic acid derivative can eliminate a leaving group, leading to a net nucleophilic acyl substitution reaction. The tetrahedral intermediate... 

The addition of a nucleophile to a polar C=0 bond is the key step in thre< of the four major carbonyl-group reactions. We saw in Chapter 19 that when. nucleophile adds to an aldehyde or ketone, the initially formed tetrahedra intermediate either can be protonated to yield an alcohol or can eliminate th< carbonyl oxygen, leading to a new C=Nu bond. When a nucleophile adds to carboxylic acid derivative, however, a different reaction course is followed. Tin initially formed tetrahedral intermediate eliminates one of the two substituent originally bonded to the carbonyl carbon, leading to a net nucleophilic acy substitution reaction (Figure 21.1. ... 

Conversion of Acid Halides into Acids Hydrolysis Acid chlorides react with water to yield carboxylic acids. This hydrolysis reaction is a typical nucleophilic acyl substitution process and is initiated by attack of water on the acid chloride carbonyl group. The tetrahedral intermediate undergoes elimination of Cl and loss of H+ fo give the product carboxylic acid plus HC1. 

Acid-catalyzed ester hydrolysis can occur by more than one mechanism, depending on the structure of the ester. The usual pathway, however, is just the reverse of a Fischer esterification reaction (Section 21.3). The ester is first activated toward nucleophilic attack by protonation of the carboxyl oxygen atom, and nucleophilic addition of water then occurs. Transfer of a proton and elimination of alcohol yields the carboxylic acid (Figure 21.8). Because this hydrolysis reaction is the reverse of a Fischer esterification reaction, Figure 21.8 is the reverse of Figure 21.4. 

Elimination of alkoxide ion then generates the carboxylic acid. 

Conversion of Amides into Carboxylic Acids Hydrolysis Amides undergo hydrolysis to yield carboxylic acids plus ammonia or an amine on heating in either aqueous acid or aqueous base. The conditions required for amide hydrolysis are more severe than those required for the hydrolysis of add chlorides or esters but the mechanisms are similar. Acidic hydrolysis reaction occurs by nucleophilic addition of water to the protonated amide, followed by transfer of a proton from oxygen to nitrogen to make the nitrogen a better leaving group and subsequent elimination. The steps are reversible, with the equilibrium shifted toward product by protonation of NH3 in the final step. 

Basic hydrolysis occurs by nucleophilic addition of OH- to the amide carbonyl group, followed by elimination of amide ion (-NH2) and subsequent deprotonation of the initially formed carboxylic acid by amide ion. The steps are reversible, with the equilibrium shifted toward product by the final deprotonation of the carboxylic acid. Basic hydrolysis is substantially more difficult than the analogous acid-catalyzed reaction because amide ion is a very poor leaving group, making the elimination step difficult. 

Curran s synthesis of ( )-A9(l2)-capnellene [( )-2] is detailed in Schemes 30 and 31. This synthesis commences with the preparation of racemic bicyclic vinyl lactone 147 from ( )-norbomenone [( )-145] by a well-known route.61 Thus, Baeyer-Villiger oxidation of (+)-145 provides unsaturated bicyclic lactone 146, a compound that can be converted to the isomeric fused bicyclic lactone 147 by acid-catalyzed rearrangement. Reaction of 147 with methylmagne-sium bromide/CuBr SMe2 in THF at -20 °C takes the desired course and affords unsaturated carboxylic acid 148 in nearly quantitative yield. Iodolactonization of 148 to 149, followed by base-induced elimination, then provides the methyl-substituted bicyclic vinyl lactone 150 as a single regioisomer in 66% overall yield from 147. 

Elimination of sulfur from methyl dibenzo[/),/]thiepin-10-carboxylatcs 15 (R2 = Me) can be achieved in moderate yields (39-55%) upon refluxing in diethyl phthalate in the presence of copper bronze.60 For the dibenzo[A,/]thiepin-10-carboxylic acids 15 (R2 = H), the loss of sulfur is accompanied by decarboxylation. Thus, treatment of these acids with copper bronze in refluxing quinoline for four hours gives the corresponding phenanthrenes 16 (R3 = H) in moderate yield (50%). However, the exposure time to high temperatures influences the product formation. Thus, the decarboxyiated dibenzothiepins are obtained after refluxing for only five minutes.60... 

---