Electroplating metal coating types

Two types of specular references are used as standard materials. The first type, called first-surface mirrors, reflect incident radiation off the primary contact surface. These are typically vapor deposited or electroplated metals—gold, silver, rhodium, or aluminium on metallic or nonmetaUic (glass, quartz, or some other material that is thermally and mechanically stable) substrates. An important consideration is the flatness of the surface to be coated. The material must have minimal roughness and the surface must be as flat as possible to avoid measurement error. 

Typically, coatings most often in use as intermediate layers are silver, nickel, copper, and gold however, silver is used by far the most often. This is so because of the low dissociation temperature of silver oxide, making it relatively easy to obtain clean surfaces. Also, the typical thickness range of electroplates used, in practice, for diffusion welding is about 15 to 40/rm, but thicknesses as great as 130 )um must sometimes be used. A considerable variety of steel types as well as aluminum and a host of other difficult-to-join metals and even beryllium have been and continue to be diffusion bonded with the use of electroplated intermediate layers. 

The technique may be said to combine the advantages of vacuum evaporation and sputtering, so that excellent qualities of adhesion are obtained without a limitation of maximum thickness of the coating—while at the same time the rate of deposition can be comparatively high. Many metals, alloys, and compounds may be deposited, on both metallic and non-metallic articles. However, its use at present is mainly for functional and protective applications, particularly where high resistance to corrosion is required. Thus, as examples, aluminium may be deposited on various types of steel and on titanium for uses in the aerospace and defence industries—and can be regarded as a less hazardous replacement for cadmium electroplating. 

---