Electrolytes thiosulfate

Other Uses. Photochromic glass contains silver chloride (80) and silver molybdate [13765-74-7] (81) (see Chromogenic materials). An apparatus coated with silver nitrate has been described for the detection of rain or snow (82). Treatment with silver-thiosulfate complex has been reported as dramatically increasing the post-harvest life of cut carnations (83). Silver sulfate has been used in the electrolytic coloring of aluminum (84). Silver sulfate also imparts a yellowish red color to glass bulbs (85). 

Elemental iodine can be formed from aqueous iodide ion (by means of the oxidative electrode reaction, 21 b -I- 2e ) by passing a charge of 8.04 x 10 C. The amount of iodine was subsequently determined (by titration with aqueous thiosulfate) to be 0.239 mol. What is the electrolytic efficiency ... 

The Cd/CdS electrode was also prepared in solutions containing cadmium sulfate and sodium thiosulfate using the potentiodynamic method [183]. The electrochemical behavior of such electrodes in electrolytes containing sulfide ions was studied. 

A comparison of anodic polarization curves for various reducing agents shows that the reducing power in a base electrolyte containing sulfite, thiosulfate, and ammonium chloride at pH 6.0 and at 60 °C decreases in the order ascorbate > thiourea > hydrazine. These polarization curves are reproduced in Fig. 41, which demonstrates that hydroxylamine and formaldehyde are not useful as reducing agents in this system. 

Hydroxyethyl cellulose has good tolerance for dissolved electrolytes, although it may be salted out of solution when mixed with certain salt solutions. For example, the following salt solutions will precipitate a 10% w/v solution of Cellosize WP-09 and a 2% w/v solution of Cellosize WP-4400 sodium carbonate 50% and saturated solutions of aluminum sulfate ammonium sulfate chromic sulfate disodium phosphate magnesium sulfate potassium ferrocyanide sodium sulfate sodium sulfite sodium thiosulfate and zinc sulfate. 

Baron, J. Y., Mirza, J., Nicol, E. A., Smith, S. R., Leitch, J. J., Choi, Y., Lipkowski, J. (2013). SERS and electrochemical studies of the gold-electrolyte interface under thiosulfate based leaching conditions. 

Chandra, I., Jeffrey, M. I. (2004).An electrochemical study of the effect of additives and electrolyte on the dissolution of gold in thiosulfate solutions. Hydrometallurgy,73(3-4), 305-312. 

Sodiura/polassium ATPase, 555 Sodium pump, 555 mechanism, 556 Sodium salts electrolyte balance, 771 Sodium thiosulfate photography... 

The temperature is 50-70 °C and the current density is usually 1-5 A dm . The electrolyte can be used without additives or with additives, like thiosulfate, selene compounds, and alcanediols. 

Figure 23-1. Acceleration of the bromoacetate-thiosulfate reaction at 25 C by various low-molar-mass and high-molar-mass electrolytes as a function of the molar concentration (El) with respect to catalytically effective groups. PEI nHCl, Poly (ethylene imine hydrochloride) TP 5HC . tetraethylene pentamine hydrochloride DT-3HC1, diethylene triamine hydrochloride. The bromoacetate and thiosulfate concentrations were, in each case, 0.01 mol liter unless otherwise noted. (After N. Ise and F. Matsui.)...

---