Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Electrochemical reactions galvanic cell

Figure 6.1. An electrochemical (or galvanic) cell. The reduction half-reaction occurs at the silver electrode, which is therefore the cathode and is positively charged. The oxidation half-reaction occurs at the copper electrode, which is therefore the anode and is negatively charged. Figure 6.1. An electrochemical (or galvanic) cell. The reduction half-reaction occurs at the silver electrode, which is therefore the cathode and is positively charged. The oxidation half-reaction occurs at the copper electrode, which is therefore the anode and is negatively charged.
Galvanic cells in which stored chemicals can be reacted on demand to produce an electric current are termed primaiy cells. The discharging reac tion is irreversible and the contents, once exhausted, must be replaced or the cell discarded. Examples are the dry cells that activate small appliances. In some galvanic cells (called secondaiy cells), however, the reaction is reversible that is, application of an elec trical potential across the electrodes in the opposite direc tion will restore the reactants to their high-enthalpy state. Examples are rechargeable batteries for household appliances, automobiles, and many industrial applications. Electrolytic cells are the reactors upon which the electrochemical process, elec troplating, and electrowinning industries are based. [Pg.2409]

In complete galvanic cells, electrochemical reactions occur simultaneously at the anode and cathode. Since the current is of equal strength at the two electrodes, the corresponding electrode reactions are interrelated, in that the number of electrons set free in unit time at the anode is equal to the number of electrons reacting during the same time at the cathode. Electrode reactions subject to such a condition are called coupled reactions. [Pg.14]

This equation links the EMF of a galvanic cell to the Gibbs energy change of the overall current-producing reaction. It is one of the most important equations in the thermodynamics of electrochemical systems. It follows directly from the first law of thermodynamics, since nF% is the maximum value of useful (electrical) work of the system in which the reaction considered takes place. According to the basic laws of thermodynamics, this work is equal to -AG . [Pg.42]

Having introduced matters pertaining to the electrochemical series earlier, it is only relevant that an appraisal is given on some of its applications. The coverage hereunder describes different examples which include aspects of spontaneity of a galvanic cell reaction, feasibility of different species for reaction, criterion of choice of electrodes to form galvanic cells, sacrificial protection, cementation, concentration and tempera lure effects on emf of electrochemical cells, clues on chemical reaction, caution notes on the use of electrochemical series, and finally determination of equilibrium constants and solubility products. [Pg.650]

In case (c), a voltage opposite to and higher than the emf of the galvanic cell is imposed as a consequence, the current flow and hence also the electrochemical reactions are reversed, which means that half-reaction 1 becomes an anodic oxidation and half-reaction 2 is a cathodic reduction, so that Zn is deposited instead of Cu. [Pg.26]

Potentiometry deals with the electromotive force (EMF) generated in a galvanic cell where a spontaneous chemical reaction is taking place. In practice, potentiometry employs the EMF response of a galvanostatic cell that is based on the measurement of an electrochemical cell potential under zero-current conditions to determine the concentration of analytes in measuring samples. Because an electrode potential generated on the metal electrode surface,... [Pg.628]

In this section, you learned about electrolytic cells, which convert electrical energy into chemical energy. You compared the spontaneous reactions in galvanic cells, which have positive cell potentials, with the non-spontaneous reactions in electrolytic cells, which have negative cell potentials. You then considered cells that act as both galvanic cells and electrolytic cells in some common rechargeable batteries. These batteries are an important application of electrochemistry. In the next two sections, you will learn about many more electrochemical applications. [Pg.537]

Electrochemical Reactions. Consider a simple galvanic cell, composed of two metal electrodes, zinc and copper, immersed in two different aqueous solutions of unit activity—in this case, 1.0 M ZnS04 and 1.0 M CUSO4, respectively, connected by an electrical circuit, and separated by a semipermeable membrane (see Figure 3.8). The membrane allows passage of ions, but not bulk flow of the aqueous solutions from one side of the cell to the other. Electrons are liberated at the anode by the oxidation (increase in the oxidation number) of the zinc electrode ... [Pg.226]

According to Birss and Truax (72), students are likely to experience confusion and difficulty with more advanced treatments of the subject. With regard to conceptual difficulties, the authors looked at the equilibrium potential, the reversal of sign of electrode reactions that are written as oxidations, and the differences between galvanic (electrochemical) and electrolytic cells. An approach for teaching these topics at the freshman level was then proposed. In this approach, concepts from thermodynamics and chemical kinetics are interwoven with those of electrochemical measurements. Very useful are... [Pg.87]

Galvanic CELLS axe electrochemical cells in which an external electric current is produced by an internal chemical reaction.1 7 As an example, consider first the dissolution of zinc metal in a strong aqueous acid to give Zn2+ (aq) and hydrogen gas ... [Pg.285]

Electrolysis is the process of driving a reaction in a nonspontaneous direction by using an electric current. An electrolytic cell is an electrochemical cell in which electrolysis takes place. The arrangement of components in electrolytic cells is different from that in galvanic cells. Specifically, the two electrodes usually share the same compartment, there is usually only one electrolyte, and concentrations and pressures are usually far from standard. [Pg.729]

Electrochemical cells may be one of two types. Should a current spontaneously flow on connecting the electrodes via a conductor, the cell is a galvanic cell. An electrolytic cell is one in which reactions occur when an external voltage greater than the reversible potential of the cell is applied. Simple examples involving copper are given in Figure 1. It is the electrolytic cell which is of interest in the electrodeposition of metals. [Pg.2]

Thus far, we ve been concerned only with galvanic cells—electrochemical cells in which a spontaneous redox reaction produces an electric current. A second important kind of electrochemical cell is the electrolytic cell, in which an electric current is used to drive a nonspontaneous reaction. Thus, the processes occurring in galvanic and electrolytic cells are the reverse of each other A galvanic cell converts... [Pg.792]

However, electrochemical cells are most conveniently considered as two individual half reactions, whereby each is written as a reduction in the form indicated by Equations2.ll and 2.12. When this is done and values of the appropriate quantities are inserted, a potential can be calculated for each half cell of the electrode system. Then the reaction corresponding to the half cell with the more positive potential will be the positive terminal in a galvanic cell, and the electromotive force of that cell will be represented by the algebraic difference between the potential of the more-positive half cell and the potential of the less-positive half cell ... [Pg.39]

With the arrangement shown above, the reaction proceeds spontaneously, in which electrons move from left to right and X ions from right to left so that the electroneutrality is maintained. This type of reactions which take place in an electrochemical manner is called electrochemical reaction. A device like the one shown above, which permits a spontaneous electrochemical reaction to produce a detectable electric current, is termed a galvanic cell. As shown in the above figure, oxidation occurs in one half-cell and reduction occurs in the other half-cell. The electrode at which oxidation occurs is referred to as the anode, while the electrode at which reduction occurs is termed cathode. [Pg.234]

The galvanic cell performs an electric work when the electrochemical reaction of the cell occurs. As work is not a state function, the amount of work which a system does depends on the path it takes for given initial and final states. Under what conditions does the amount of work the cell performs become maximum ... [Pg.236]

If the mixture of all reactants and products is in a same reactor, the above chemical reaction will proceed from left to right with a driving force equivalent to the free energy change of AG,. The reaction will continue until AG, = 0. If a galvanic cell is constructed as shown below, the same reaction will occur, but in an electrochemical manner. [Pg.236]


See other pages where Electrochemical reactions galvanic cell is mentioned: [Pg.18]    [Pg.606]    [Pg.500]    [Pg.34]    [Pg.602]    [Pg.841]    [Pg.610]    [Pg.948]    [Pg.400]    [Pg.294]    [Pg.1374]    [Pg.1408]    [Pg.79]    [Pg.343]    [Pg.697]    [Pg.581]    [Pg.659]    [Pg.827]    [Pg.265]    [Pg.320]    [Pg.219]    [Pg.230]    [Pg.45]    [Pg.252]    [Pg.180]    [Pg.400]    [Pg.270]    [Pg.379]    [Pg.702]    [Pg.230]    [Pg.235]   


SEARCH



Cell galvanics

Cell reaction cells

Cell reactions

Cells, electrochemical galvanic

Electrochemical cell

Electrochemical cell reaction

Electrochemical galvanic

Electrochemical reactions

© 2024 chempedia.info