Electricity ceramic conductors

Ceramic Ceramics are nonmetallic materials that have been created under intense heat. Ceramics tend to be extremely hard, heat-resistant and corrosion-resistant. They are generally poor conductors of temperature changes or electricity. Ceramics are used in low-tech and high-tech applications, ranging from the insulators in spark plugs to the heat shield on the Space Shuttle. 

We have successfully paoduced the N5-type glass-ceramic conductors by bias crystallization of the glasses with the composition NaiosYassPasSi yOs in an electric field. The microstructure and the conduction properties were dependent on the current direction in the process of crystallization. The cross sections which are parallel and perpendicular to the electric field direction showed the ionic conductivities of 0.0923 and 0.132 mS/ cm at 300°C, respectively. The microstructure and the electric conductivity of the glass-ceramics perpendicular to the electric field direction were significantly different from those in p>arallel. 

Electronic Applications. The PGMs have a number of important and diverse appHcations in the electronics industry (30). The most widely used are palladium and mthenium. Palladium or palladium—silver thick-film pastes are used in multilayer ceramic capacitors and conductor inks for hybrid integrated circuits (qv). In multilayer ceramic capacitors, the termination electrodes are silver or a silver-rich Pd—Ag alloy. The internal electrodes use a palladium-rich Pd—Ag alloy. Palladium salts are increasingly used to plate edge connectors and lead frames of semiconductors (qv), as a cost-effective alternative to gold. In 1994, 45% of total mthenium demand was for use in mthenium oxide resistor pastes (see Electrical connectors). 

Silicon carbide has very high thermal conductivity and can withstand thermal shock cycling without damage. It also is an electrical conductor and is used for electrical heating elements. Other carbides have relatively poor oxidation resistance. Under neutral or reducing conditions, several carbides have potential usehilness as technical ceramics in aerospace appHcation, eg, the carbides (qv) of B, Nb, Hf, Ta, Zr, Ti, V, Mo, and Cr. Ba, Be, Ca, and Sr carbides are hydrolyzed by water vapor. 

Properties and Mature of Bonding. The metaUic carbides are interesting materials that combine the physical properties of ceramics (qv) with the electronic nature of metals. Thus they are hard and strong, but at the same time good conductors of heat and electricity. 

The transport of charged ions in alkali halides and, later on, in (insulating) ceramics is a distinct parepisteme, because electric fields play a key role. This large field is discussed in Schmalzried s 1995 book, already mentioned, and also in a review by one of the pioneers (Nowick 1984). This kind of study in turn led on to the developments of superionic conductors, in which ions and not electrons carry substantial currents (touched on again in Chapter 11, Section 11.3.1.1). 

Ceramic anodes may be cast or sintered around a central steel core which acts as the electrical conductor. However, anodes produced in this form are brittle and susceptible to mechanical shock. 

Electrochemical promotion, or non-Faradaic Electrochemical Modification of Catalytic Activity (NEMCA) came as a rather unexpected discovery in 1980 when with my student Mike Stoukides at MIT we were trying to influence in situ the rate and selectivity of ethylene epoxidation by fixing the oxygen activity on a Ag catalyst film deposited on a ceramic O2 conductor via electrical potential application between the catalyst and a counter electrode. 

Inorganic polymers based on alternating main group element-nitrogen skeletons (e.g. I - IV) are of interest for their potential as elastomers, high-temperature oils, electrical conductors, biological molecule carriers, and precursors to ceramic materials (J - 6). 

The discussion of the previous section would also lead us to believe that since most ceramics are poor electrical conductors (with a few notable exceptions) due to a lack of free electrons, electronic conduction would be negligible compared to lattice, or phonon, conduction. This is indeed the case, and we will see that structural effects such as complexity, defects, and impurity atoms have a profound effect on thermal conductivity due to phonon mean free path, even if heat capacity is relatively unchanged. 

CD Cu-S(e) films have been proposed for a number of different potential applications. Solar control coatings, where the visible and IR transmission and reflectivity can be varied, is probably the most studied, e.g.. Refs. 44 and 45. The relatively high conductivity and the partial transmittance in the visible spectrum are useful for transparent conductors [46]. Other possible applications are for Cu sensor electrodes and electrical contacts for ceramic devices [46]. 

Materials can be classified as conductors, semiconductors or insulators. Conductors typically have resistivity in the range 10 2-103 xQ cm, semiconductors approximately 106-10n iQ cm, and insulators about 1013-1018 (xQ cm. Table 1.5 compares the electrical resistivity of the elements and compounds at room temperature. Although the carbides and nitrides have somewhat higher resistivity than do the pure metals, they still have resistivity in the regime of metallic conductors. In comparison the ceramic materials have much higher values, and are typically insulators. 

---