Dough molding compound

Bulk molding compound BMC is also called dough molding compound (DMC). It is a molding compound (extruded log form) that is not produced in sheet form. It consists... [Pg.510]

Acrylonitrile-butadiene-styrene copolymer USA grade phenolic microspheres Bulk molding compound USSR grade phenolic microspheres Dough molding compound Dinitrosopentamethylenetetramine... [Pg.65]

BMC also called dough molding compound (DMC) is a mixture usually of short glass fibers, resin, and additives similar to the SMC compound. This mixture can be produced in bulk form, or extruded in... [Pg.472]

Rydes, M. (1993) Aspects of the Rheology of Unsaturated Polyester Dough Molding Compounds, London University of West London and National Physical Laboratories. [Pg.350]

Four types of polyester molding compounds may be recognized [14] (1) dough-molding compound (DMC), (2) sheet-molding compound (SMC), (3) alkyd-molding compositions, sometimes referred to as polyester alkyds, (4) diallyl phthalate (DAP) and diallyl isophthalate (DAIP) compounds. [Pg.444]

DMC (dough molding compound) this is basically the same as BMC but usually without a thickener. [Pg.241]

Discontinuous reinforcement Reinforcement fibers may be whiskers, chopped or milled fibers. DMC Dough molding compound, contains all components for complete final cure, also called bulk molding compounds. [Pg.1052]

Unsaturated polyesters find their widest use in laminates, composites such as tanks, boat bodies, lampposts, storage products, etc. Some unsaturated polyesters are used in dough molding compounds, sheet molding compounds, and molding compound in pellet form. Applications include those requiring good electrical properties and where heat resistance is beneficial. [Pg.581]

Phenol formaldehyde, PF urea formaldehyde, UF melamine formaldehyde, MF. Applications molded pieces, granulated molding compounds (GMCs), bulk molding compounds, dough molding compounds... [Pg.512]

DDR draw-down ratio DEHP di-ethylhexyl phthalate DGA differential gravimetric analysis DIN Deutsches Instut, Normung (German Standards Commission) DINP di-isononyl phthalate DMA dynamic mechanical analysis DMC dough molding compound DN Design News publication DNA deoxyribonucleic acid DOD Department of Defense... [Pg.482]

Hydrocyclones can be manufactured from dough-molded compound fiberglass, cast iron, or sheet metal lined with polyurethane. Metal and fiberglass cyclones are lined with rubber or with hard metal (Ni-hard or 28% chrome white iron). Burgess and Abulnaga (1991) presented a finite element analysis of fiberglass cyclones. [Pg.386]