Heterogeneous Distillation

Keywords Batch distillation Heterogeneous entrainer Azeotropic distillation... 

Ethanol-water Minimum-boiling azeotrope None Alternative to extractive distillation, salt extractive distillation, heterogeneous azeotropic distillation must reduce pressure to less than 11.5 kPa for azeotrope to disappear... 

Fig. 2.17 Equipment suitable for combining reaction and distillation (heterogeneous catalysis)...

When a multicomponent fluid mixture is nonideal, its separation by a sequence of ordinaiy distillation columns will not be technically and/or economically feasible if relative volatiK-ties between key components drop below 1.05 and, particularly, if azeotropes are formed. For such mixtures, separation is most commonly achieved by sequences comprised of ordinary distillation columns, enhanced distillation columns, and/or liquid-liquid extraction equipment. Membrane and adsorption separations can also be incorporated into separation sequences, but their use is much less common. Enhanced distillation operations include extractive distillation, homogeneous azeotropic distillation, heterogeneous azeotropic distillation, pressure-swing distillation, and reactive distillation. These operations are considered in detail in Perry s Chemical Engineers Handbook (Perry and Green, 1997) and by Seader... 

Benzoylpropionitrile. To a mixture of 21 4 g. of p dimethylamino propiophenone hydrochloride, 13 0 g. of potassium cyanide in a 500 ml. flask, add 260 ml. of boiling water heat the heterogeneous mixture under reflux for 30 minutes. Part of the dimethylamine, which is eliminated in the reaction, distils collect this in dilute hydrochloric acid. Cool the reaction mixture in ice the oil sohdifies and crystals form from the aqueous layer. Collect the solid (crude p benzoylpropiouitrile, 10-5 g.) by suction filtration and recrystallise it from benzene - light petroleum (b.p. 40-60°) it separates as almost colourless blades, m.p. 76°. 

Esterification. Extensive commercial use is made of primary amyl acetate, a mixture of 1-pentyl acetate [28-63-7] and 2-metliylbutyl acetate [53496-15-4]. Esterifications with acetic acid are generally conducted in the Hquid phase in the presence of a strong acid catalyst such as sulfuric acid (34). Increased reaction rates are reported when esterifications are carried out in the presence of heteropoly acids supported on macroreticular cation-exchange resins (35) and 2eohte (36) catalysts in a heterogeneous process. Judging from the many patents issued in recent years, there appears to be considerable effort underway to find an appropriate soHd catalyst for a reactive distillation esterification process to avoid the product removal difficulties of the conventional process. 

The principal commercial source of 1-butanol is -butyraldehyde [123-72-8] obtained from the Oxo reaction of propylene. A mixture of n- and isobutyraldehyde [78-84-2] is obtained in this process this mixture is either separated initially and the individual aldehyde isomers hydrogenated, or the mixture of isomeric aldehydes is hydrogenated direcdy and the n- and isobutyl alcohol product mix separated by distillation. Typically, the hydrogenation is carried out in the vapor phase over a heterogeneous catalyst. For example, passing a mixture of n- and isobutyraldehyde with 60 40 H2 N2 over a CuO—ZnO—NiO catalyst at 25—196°C and 0.7 MPa proceeds in 99.95% efficiency to the corresponding alcohols at 98.6% conversion (7,8) (see Butyraldehydes Oxo process). 

The SRC-II process, shown in Figure 2, was developed in order to minimise the production of soHds from the SRC-I coal processing scheme. The principal variation of the SRC-II process relative to SRC-I was incorporation of a recycle loop for the heavy ends of the primary Hquefaction process. It was quickly realized that minerals which were concentrated in this recycle stream served as heterogeneous hydrogenation catalysts which aided in the distillate production reactions. In particular, pyrrhotites, non stoichiometric iron sulfides, produced by reduction of iron pyrite were identified as being... 

The first successful appHcation of heterogeneous azeotropic distillation was in 1902 (87) and involved using benzene to produce absolute alcohol from a binary mixture of ethanol and water. This batch process was patented in 1903 (88) and later converted to a continuous process (89). Good reviews of the early development and widespread appHcation of continuous azeotropic distillation in the prewar chemical industry are available (90). 

Historically azeotropic distillation processes were developed on an individual basis using experimentation to guide the design. The use of residue curve maps as a vehicle to explain the behavior of entire sequences of heterogeneous azeotropic distillation columns as weU as the individual columns that make up the sequence provides a unifying framework for design. This process can be appHed rapidly, and produces an exceUent starting point for detailed simulations and experiments. 

Residue Curve Maps. Residue curve maps are useful for representing the infinite reflux behavior of continuous distillation columns and for getting quick estimates of the feasibiHty of carrying out a desired separation. In a heterogeneous simple distillation process, a multicomponent partially miscible Hquid mixture is vaporized ia a stiH and the vapor that is boiled off is treated as being ia phase equiHbrium with all the coexistiag Hquid phases. 

The vapor is thea withdrawa from the stiH as distillate. The changing Hquid composition is most coavenieafly described by foUowiag the trajectory (or residue curve) of the overall composition of all the coexistiag Hquid phases. An exteasive amouat of valuable experimental data for the water—acetoae—chloroform mixture, including biaary and ternary LLE, VLE, and VLLE data, and both simple distillation and batch distillation residue curves are available (93,101). Experimentally determined simple distillation residue curves have also been reported for the heterogeneous system water—formic acid—1,2-dichloroethane (102). 

Fig. 18. Separation of ethanol from an ethanol—water—benzene mixture using benzene as the entrainer. (a) Schematic representation of the azeo-column (b) material balance lines where I denotes the homogeneous and the heterogeneous azeotropes D, the end points of the Hquid tie-line and A, the overhead vapor leaving the top of the column. The distillate regions, I, II, and III, and the boundaries are marked. Other terms are defined in text.

Three types of binary equilibrium cui ves are shown in Fig. 13-27. The y-x diagram is almost always plotted for the component that is the more volatile (denoted by the subscript 1) in the region where distillation is to take place. Cui ve A shows the most usual case, in which component 1 remains more volatile over the entire composition range. Cui ve B is typical of many systems (ethanol-water, for example) in which the component that is more volatile at lowvalues of X becomes less volatile than the other component at high values of X. The vapor and liquid compositions are identical for the homogeneous azeotrope where cui ve B crosses the 45° diagonal. A heterogeneous azeotrope is formed with two liquid phases by cui ve C,... 

FIG. 13-69 Separation of Llltanol-water with heterogeneous azeotropio distillation. 

---