Disodium ethylene-diaminetetraacetate

More recently the introduction of an analytical reagent disodium ethylene-diaminetetraacetate, invariably termed as EDTA, an altogether latest titrimetric method has been used exclusively for the estimation of metals using metal-ion indicators. [Pg.161]

As soon as contents of beakers are completely dissolved, the solns are diluted to ca 500ml and titrated, in presence of murexide indicator, with 0.1M disodium ethylene-diaminetetraacetate(EDTA) to chge of color from yel to purple. Each ml of 0.100M EDTA corresponds to I6.691mg CIO and 19.891mg CIO ... [Pg.578]

M EDTA Weigh out an appropriate amount of disodium ethylene-diaminetetraacetic acid and add to stirring distilled water (about 75% of the final volume). Add sodium hydroxide pellets slowly until the solution begins to clear. Monitor the pH and add NaOH until the EDTA has dissolved and the pH reaches between 7 and 8. Make up to the final volume, filter through a paper filter, and autoclave. Store the solution in a refrigerator. [Pg.60]

The extraction of milk samples was done by the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method [13], modified by adding disodium ethylene-diaminetetraacetate dihydrate (Na2-EDTA). Without any further cleanup, the extract was separated on HPTLC silica gel plates modified by Na2-EDTA. The development was performed with chloroform/methanol/ammonium hydroxide solution (25%), 60/35/5 (v/v/v), followed by fluorescence densitometry (ELD) at 366 nm/<400 nm... [Pg.178]

C. n-Butanol-ammonium hydroxide-water (4 1 5) Whatman No. I satd. with O.I M disodium ethylene diaminetetraacetic acid, descending... [Pg.229]

EDTA eluent (lm mol L-1) was prepared by dissolving ethylene diaminetetraacetic acid disodium salt in deionised water and adjusting to pH 6.0 with O.lmol L 1 sodium hydroxide. [Pg.73]

Synonyms calcium disodium edetate calcium disodium ethylenediaminetetraacetate calcium disodium (ethylene-dinitrilo)tetraacetate E385 edathamil calcium disodium edetic acid calcium disodium salt EDTA calcium ethylene-diaminetetraacetic acid calcium disodium chelate [(ethyl-enedinitrilo)tetraacetato]calciate(2-) disodium sodium calciumedetate Nersene CA. [Pg.262]

In order to minimize deterioration, it is recommended that all salt solutions used for lipoprotein fractionation contain 10 mg/100 ml of the disodium salt of ethylene-diaminetetraacetic acid (EDTA). [Pg.27]

Dissolve 50 g of the disodium salt of ethylene diaminetetraacetate in 4.5 liters of distilled water. Adjust the pH to 6.5 with a little (ca. 5% w/v) sodium hydroxide solution and dilute to 5 liters. [Pg.92]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...