Dimethyl sulfoxide trioxide

The use of dimethyl sulfoxide-acetic anhydride as a reagent for the oxidation of unhindered steroidal alcohols does not appear to be as promising due to extensive formation of by-products. However, the reagent is sufficiently reactive to oxidize the hindered 11 j -hydroxyl group to the 11-ketone in moderate yield. The use of sulfur trioxide-pyridine complex in dimethyl sulfoxide has also been reported. The results parallel those using DCC-DMSO but reaction times are much shorter and the work-up is more facile since the separation of dicyclohexylurea is not necessary. Allylic alcohols can be oxidized by this procedure without significant side reactions. 

Vicinal glycols may be oxidized to the corresponding 17a-hydroxy-20-ketones in reasonable yields by means of chromium trioxide in dimethylfor-mamide in the presence of manganese dichloride, or by treatment with dimethyl sulfoxide-acetic anhydride. ... 

Copper(II) sulfate Cumene hydroperoxide Cyanides Cyclohexanol Cyclohexanone Decaborane-14 Diazomethane 1,1-Dichloroethylene Dimethylformamide Hydroxylamine, magnesium Acids (inorganic or organic) Acids, water or steam, fluorine, magnesium, nitric acid and nitrates, nitrites Oxidants Hydrogen peroxide, nitric acid Dimethyl sulfoxide, ethers, halocarbons Alkali metals, calcium sulfate Air, chlorotrifluoroethylene, ozone, perchloryl fluoride Halocarbons, inorganic and organic nitrates, bromine, chromium(VI) oxide, aluminum trimethyl, phosphorus trioxide... 

Transformations of Methyl 5-0-Benzyl-2-0-methyl-/3-I)-glueofuranosidurono-6,3-lae-tone (86) to Dimethyl (Z,E)-2-Methoxy-5-(phenylmethoxy)-2,4-hexadienedioatevl (87). ( Elimination employing DBU b oxidation with silver oxide-sodium hydroxide followed by diazomethane esterification c acidic glycoside cleavage, oxidation by dimethyl sulfoxide-acetic anhydride with formation of 5-0-benzyl-2-0-methyI-D-glucaro-1,4 6,3-dilactone, elimination by using DBU, followed by short treatment with diazomethane d elimination by DBU with subsequent diazomethane esterification e sodium borohydride in hexamethylphosphoric triamide 1 catalytic oxidation followed by short treatment with diazomethane " dimethyl sulfoxide-sulfur trioxide-pyridine-triethylamine.150)... 

There are several methods reported in the literature for transforming vicinal diols into ct-diketones while avoiding the risk of C-C bond cleavage.26 Examples include the standard Swem conditions (dimethyl sulfoxide and oxalyl chloride followed by triethylamine), or the use of DMSO activated by acetic anhydride, pyridine-sulfur trioxide complex, or dicyclohexylcarbodiimide (Mq/J-att oxidation). Diones are also obtained by treatment with benzalacetone as a hydride acceptor in the presence of catalytic amounts of tris(triphenylphosphine)ruthenium dichlonde [(PPh RuCFl.27 Recent developments include the use of w-iodoxyben/.oic acid28 or the oxoammonium salt of 4-acctamidoletramethylpipcridine-1-oxyl and y -toluencNulfonic acid.29... 

The cis- 1,2-glycols, obtainable from the parent aromatic hydrocarbon by osmium tetroxide hydroxylation, can be converted to the corresponding trans-1,2-glycols by oxidation-reduction, using a mixture of dimethyl sulfoxide, sulfur trioxide, and pyridine, followed by lithium aluminum hydride reduction. The trans- 1,2-glycols can be dehydrated to arene oxides using DMF-DMA as mentioned above. Benzo[a]pyrene 4,5-oxide (28) and 7,12-dimethylbenz[a]anthracene 5,6-oxide (30) have been prepared by this method in 68 and 80% yields, respectively.18... 

Dimethyl sulfoxide-oxalyl chloride, 215-216 Dimethyl sulfoxide-sulfur trioxide, 216 Dimethyl(2,4,6-tri-f-butylphenoxy)chlorosilanc. 217... 

One of the best activators fw dimethyl sulfoxide is the complex of sulfur trioxide/pyiidine, which in the presence of triethylamine rapidly oxidizes primary and secondary alcrdmls to aldehydes and ketones in very good yields at ambient temperature. This reagent also allows the very useM crmversion of allylic alcohols to the corresponding a, unsaturated carbonyl compounds. A further advantage of this procedure over many of the others is the ease of woiit-up, especially over the dimethyl sulfoxide-dicy-clohexylcarbodiimide method. 

In an example of the use of this activation method testosterone, with a IT -hydroxy group, was oxidized to A -androstene-3,17-dione very rapidly in high yield, in contrast to the use DMSO-acetic anhydride. During a reaction, when other oxidizing agents were found to be ineffective, sulfur trioxide/dimethyl sulfoxide led to smooth oxidation of the df-diol (16 equation 8) to an o-quinone in 49% yield and the ci.r-diol (17) to (18 equation 9) in 98% yield. - The use of dimethyl sulfoxide-acetic anhydride for this oxidation gave large amounts of the diacetate as the by-product. 

The above discussion has concentrated upon the reagents used, but it is equally of value to comment on the substrate, particularly in reactions for which other oxidation methods have been reported to fail. A good example is the oxidation of the iron-carbonyl complex (31) to the ketone (32 equation 14). The use of dimethyl sulfoxide activated with sulfur trioxide-pyridine complex gave a 70% yield of the product, in contrast to the use of the Pfitzner-Moffatt procedure (dimethyl sulfoxide-DCC) or the chromium... 

The sulfur trioxide- dine activated dimethyl sulfoxide oxidation was also a key step in an excellent synthesis of die Prelog- jerassi lactonic acid, being highly recommended as the best method to avoid epimeiization of the C-2 center in the aldehyde (33). ... 

Other hazardous reactions may occur with carbon (e.g., soot, graphite, activated charcoal), dimethyl sulfoxide, ethylene oxide, chlorine, bromine vapor, hydrogen bromide, potassium iodide + magnesium bromide, chloride or iodide, maleic anhydride, mercury, copper(II) oxide, mercury(II) oxide, tin(IV) oxide, molybdenum(III) oxide, bismuth trioxide, phosphoms trichloride, sulfur dioxide, chromium trioxide. 

In contrast, the chemistry of the oxidation of a primary alcohol to an aldehyde differs sharply from the oxidation of an aldehyde to a carboxylic acid (case (b)). Advantage, in this case, must be taken of the difference in the mechanisms of these steps. Among the reagents which can effectively oxidize alcohols and remain rather inert toward aldehydes are pyridinium chlorochro-mate (a chromium trioxide-hydrogen chloride complex of pyridine) or dimethyl sulfoxide-Lewis acid. 

The maiin domain of oxidation with dimethyl sulfoxide is the conver-sionofprimary alcoholsinto aldehydes andofsecondaryalcoholsintoketones. These reactions are accomplished under very mild conditions, sometimes at temperatures well below 0 °C. The reactions require the presence of acid catalysts such as acetic anhydride [713, 1008, 1009], trifluoroacetic acid [1010], trifluoroacetic anhydride [1011, 1012, 1013], trifluorometh-anesulfonic acid [1014], phosphoric acid [1015, 1016], phosphorus pentox-ide [1006, 1017], hydrobromic acid [1001], sulfur trioxide [1018], chlorine [1019, 1020], A -bromosuccinimide [997], carbonyl chloride (phosgene) [1021], and oxalyl chloride (the Swem oxidation) [1022, 1023, 1024], Dimethyl sulfoxide also converts sufficiently reactive halogen derivatives. into aldehydes or ketones [998, 999] and epoxides to a-hydroxy ketones at -78 °C [1014]. 

Pyridinium dichromate, prepared from chromium trioxide in a minimum amount of water and pyridine, forms a bright-orange solid and is soluble in water, dimethylformamide, dimethyl sulfoxide, and dimethyl-acetamide sparingly soluble in dichloromethane, chloroform, and acetone and almost insoluble in hexane, toluene, ether, and ethyl acetate. Allylic secondary alcohols are oxidized more rapidly than their saturated analogues. Oxidations are carried out in dichloromethane solutions at 25 °C, and ketones are obtained in high yields (equation 251) [603. ... 

The oxidation of diols having alcoholic groups of the same nature, for example, both alcoholic groups are primary, secondary, allylic, or benzylic, is usually carried out at both groups to yield dialdehydes [832] or diketones [552], Such reactions are achieved by chromium trioxide [582], barium manganate [832], dimethyl sulfoxide activated with acetic anhydride [1013], and others (equations 284 and 285). 

In the first step of this reaction sequence, the primary alcohol 21 is oxidized to the corresponding aldehyde 38 in a Parikh-Doering oxidation which is related to the Swern oxidation. In general, this type of oxidation is conveniently carried out by addition of a solution of pyridine-SOs complex in DMSO to a mixture of the alcohol, DMSO and NEts. It can be assumed that dimethyl sulfoxide and sulfur trioxide react to form 0-dimethylsulfoxonium sulfate 40, which then further reacts with primary alcohol 39 to give 0-alkyl dimethylsulf-oxonium intermediate 41. Then, sulfonium salt 42 is formed and subsequently deprotonated by NEts to give sulfonium ylide 43. Finally, an intramolecular p-elimination occurs to provide the desired aldehyde 44 and dimethyl sulfide. 

---