Dimers and Trimers

In medical research, coupling two active centers in one molecule is a common strategy to enhance the activity. So the dimers of qinghaosu (Structure 5-21) were also synthesized. Most of these compounds were more active than qinghaosu, 

Posner et al. reported that some new types of qinghaosu dimers (Structure 5-22) had antimalarial, antiproliferative, and antitumor activities. Compound 149 was 50 times more potent than the parent drug artemisinin and about 15 times more potent than the clinically used acetal artemether. Dimers 145-150 were especially 

some amide-linked dimers, sulhde-linked dimers, sulfone-linked dimers, and trimers were synthesized by Jung et al. These compounds showed potent and selective inhibition on the growth of certain human cancer cell lines (Stmcture 5-23). In particular, trimer 152 was comparable with that of clinically used anticancer dmgs. 2  

---

Terpene Copolymers. Terpenes are routinely polymerized with other terpenes or with nonterpene-type monomers (97—102). The AlCl catalyzed polymerization of P-pinene, dipentene, and terpene oligomers (oily dimers and trimers) has been found to yield resins with softening points ranging from 0—40°C (103). 

Oligomerization and Polymerization Reactions. One special feature of isocyanates is their propensity to dimerize and trimerize. Aromatic isocyanates, especially, are known to undergo these reactions in the absence of a catalyst. The dimerization product bears a strong dependency on both the reactivity and stmcture of the starting isocyanate. For example, aryl isocyanates dimerize, in the presence of phosphoms-based catalysts, by a crosswise addition to the C=N bond of the NCO group to yield a symmetrical dimer (15). 

The backbone of poly(phenylene oxide)s is cleaved under certain extreme reaction conditions. Lithium biphenyl reduces DMPPO to low molecular weight products in the dimer and trimer molecular weight range (20) and converts poly(2,6-diphenyl-l,4-phenylene oxide) to 3,5-diphenylphenol in 85% yield (21) (eq. 4). 

Commercial polystyrenes are normally rather pure polymers. The amount of styrene, ethylbenzene, styrene dimers and trimers, and other hydrocarbons is minimized by effective devolatilization or by the use of chemical initiators (33). Polystyrenes with low overall volatiles content have relatively high heat-deformation temperatures. The very low content of monomer and other solvents, eg, ethylbenzene, in PS is desirable in the packaging of food. The negligible level of extraction of organic materials from PS is of cmcial importance in this appHcation. 

Bismuth Penta.fIuoride, Bismuth(V) fluoride consists of long white needles that have been shown to have the same stmcture as the body-centered, tetragonal a-polymorph of uranium hexafluoride. The density of the soHd is 5.4 g/mL at 25°C. The soHd consists of infinite chains of trans-bridged BiF polyhedra dimers and trimers are present in the vapor phase (22). Bismuth pentafluoride may be prepared by the fluorination of BiF or... 

This type of cement has been further improved by the substitution of -hexyl van ill ate [84375-71-3] and similar esters of vanillic acid [121 -34-6] and/or syringic acid [530-57 ] for eugenol (93—95). These substituted cements are strong, resistant to dissolution, and, unlike ZOE and EBA cements, do not inhibit the polymerization of resin-base materials. Noneugenol cements based on the acid—base reaction of zinc and similar oxides with carboxyhc acids have been investigated, and several promising types have been developed based on dimer and trimer acids (82). 

Calcium Chelates (Salicylates). Several successhil dental cements which use the formation of a calcium chelate system (96) were developed based on the reaction of calcium hydroxide [1305-62-0] and various phenohc esters of sahcyhc acid [69-72-7]. The calcium sahcylate [824-35-1] system offers certain advantages over the more widely used zinc oxide—eugenol system. These products are completely bland, antibacterial (97), facihtate the formation of reparative dentin, and do not retard the free-radical polymerization reaction of acryhc monomer systems. The principal deficiencies of this type of cement are its relatively high solubihty, relatively low strength, and low modulus. Less soluble and higher strength calcium-based cements based on dimer and trimer acid have been reported (82). 

Currently, there is continuing work on an iadustry standard method for the direct determination of monomer, dimer, and trimer acids. Urea adduction (of the methyl esters) has been suggested as a means of determining monomer ia distilled dimer (74). The method is tedious and the nonadductiag branched-chain monomer is recovered with the polymeric fraction. A micro sublimation procedure was developed as an improvement on urea adduction for estimation of the polymer fraction. Incomplete removal of monomer esters or loss of dimer duriag distillation can lead to error (75). 

Flammability. Dimer and trimer acids, as well as monomer acids derived from dimer acid processing, are neither flammable nor combustible as defined by the Department of Transportation (DOT) and do not represent a fire ha2ard ... 

Filter P per Processing. In the fabrication of fuel oil and air filters for vehicles such as motorcycles and diesel locomotives, heat processing of the filter paper is required to cure the resin (usually phenoHc) with which the paper (qv) is impregnated (see Phenolic resins). The cure-oven exhaust, which contains water vapor, alcohols, and dimers and trimers of phenol, produces a typical blue haze aerosol having a pungent odor. The concentration of organic substances in the exhaust is usually rather low. 

Many reagents are able to chlorinate aromatic pyrazole derivatives chlorine-water, chlorine in carbon tetrachloride, hypochlorous acid, chlorine in acetic acid (one of the best experimental procedures), hydrochloric acid and hydrogen peroxide in acetic acid, sulfuryl chloride (another useful procedure), etc. iV-Unsubstituted pyrazoles are often used as silver salts. When methyl groups are present they are sometimes chlorinated yielding CCI3 groups. Formation of dimers and trimers (308 R = C1) has also been observed. 

The most important reaction with Lewis acids such as boron trifluoride etherate is polymerization (Scheme 30) (72MI50601). Other Lewis acids have been used SnCL, Bu 2A1C1, Bu sAl, Et2Zn, SO3, PFs, TiCU, AICI3, Pd(II) and Pt(II) salts. Trialkylaluminum, dialkylzinc and other alkyl metal initiators may partially hydrolyze to catalyze the polymerization by an anionic mechanism rather than the cationic one illustrated in Scheme 30. Cyclic dimers and trimers are often products of cationic polymerization reactions, and desulfurization of the monomer may occur. Polymerization of optically active thiiranes yields optically active polymers (75MI50600). 

The leucine zipper DNA-binding proteins, described in Chapter 10, are examples of globular proteins that use coiled coils to form both homo- and heterodimers. A variety of fibrous proteins also have heptad repeats in their sequences and use coiled coils to form oligomers, mainly dimers and trimers. Among these are myosin, fibrinogen, actin cross-linking proteins such as spectrin and dystrophin as well as the intermediate filament proteins keratin, vimentin, desmin, and neurofilament proteins. 

Figure 8.13. Schematic diagram of a trifunctional monomer (a) and its dimer (b) and trimer (c). The monomer has three reactive points and the dimer and trimer four and five respectively. In general, an...

Similarly, Itexafluoroprapylene undergoes fluoride ion induced homotelo-merization to give a series of dimers and trimers These telomerizations can be induced by other nucleophiles, such as amines Indeed, the selectivity of the pi oce-,s can be changed significantly by varying reagents and reaction conditions [25, 26] (equations 19 and 20)... 

Indole itself forms a dimer or a trimer, depending on experimental conditions the dimer hydrochloride is formed in aprotic solvents with dry HCl, whereas aqueous media lead to dimer or trimer, or both. It was Schmitz-DuMont and his collaborators who beautifully cleared up the experimental confusion and discovered the simple fact that in aqueous acid the composition of the product is dictated by the relative solubilities of the dimer and trimer hydrochlorides/ -This, of course, established the very important point that there is an equilibrium in solution among indole, the dimer, the trimer, and their salts. It was furthermore demonstrated that the polymerization mechanism involves acid catalysis and that in dilute solution the rate of reaction is dependent on the concentration of acid. 

Methylindole is, however, incorporated into mixed dimers and trimers. It thus reacts with indole and with skatole to form mixed dimers, and 2 moles react with 1 mole of indole for form a mixed trimcr. Likewise indole forms a dimer with 1,2-dimethylindole, 2-phenylindole, and even with 2,5-dimethylpyrrole, ... 

An alternative method for separating the hutenes is hy extracting isobutene (due to its higher reactivity) in cold sulfuric acid, which polymerizes it to di- and triisohutylene. The dimer and trimer of isobutene have high octane ratings and are added to the gasoline pool. 

Succinates (e.g., dicyclohexyl succinate) Hexafluoropropylene oxide (HFPO) dimers and trimers Fluorochloro compounds having CFC12 Malonic acids C(0)CH2C(0)0CH3 Cyclic sulfides... 

With bulky diphosphines Bu2P(CH2) PBu2 (n = 8-12), similar reactions of the diphosphines with MCl2(PhCN)2 give separable mixtures of monomer, dimer and trimer. With small phosphines (n = 5-7) dimers predominate (Figure 3.48). 

It is an intensely reactive and hygoscopic yellow-brown substance (m.p. 75-78°C) its volatility suggests a low molecular mass Mossbauer spectra indicate 6-coordinate gold while the Raman spectrum is interpreted in terms of cw-bridged octahedral units. In the gas phase at 170°C, it comprises dimers and trimers [29] (electron diffraction). 

A mechanism for its formation was also proposed. Essentially, this involved protonation of 2-methylfuran followed by dimerization and trimerization to a 2,4-difuryl tetrahydrofuran derivative which suffered an acid catalysed cleavage of the saturated ring to produce a carbenium ion possessing an alcoholic function at the other end of... 

---