Diimides

Aliphatic—aromatic poly(amide—imides) based on N,1S7-bis(carboxyalkyl)-benzophenone-3,3, 4,4 -tetracarboxyhc diimides have shown a 10% weight loss at 400°C (14). 

Dia ene deductions. Olefins, acetylenes, and azo-compounds are reduced by hydrazine in the presence of an oxidizing agent. Stereochemical studies of alkene and alkyne reductions suggest that hydrazine is partially oxidized to the transient diazene [3618-05-1] (diimide, diimine) (9) and that the cis-isomer of diazene is the actual hydrogenating agent, acting by a concerted attack on the unsaturated bond ... 

The pigments are manufactured either by reaction of the dianhydride with an amine or N,N -diaLkylation of the diimide. They are characterized by high tinctorial strength, excellent solvent stabiUty, very good weatherfastness, moderate brightness, and range in color from red to violet. An exception is the dianhydride which is not stable to alkah. 

Polymerization by Transimidization Reaction. Exchange polymerization via equihbrium reactions is commonly practiced for the preparation of polyesters and polycarbonates. The two-step transimidization polymerization of polyimides was described in an early patent (65). The reaction of pyromellitic diimide with diamines in dipolar solvents resulted in poly(amic amide)s that were thermally converted to the polyimides. High molecular weight polyimides were obtained by employing a more reactive bisimide system (66). The intermediate poly(amic ethylcarboamide) was converted to the polyimide at 240°C. 

The analogous reaction with ammonia leads ultimately to sihcon nitride. In the past, hydrocarbon soluble fractions of the ammonolysis were iacorrecdy referred to as sihcon diimide. This improper designation occasionally persists as of the mid-1990s. 

Additive Polyimides. Rhc ne-Poulenc s Kin el molding compound and Kerimid impregnating resin (115), Mitsubishi s BT Resins (116), and Toshiba s Imidaloy Resin (117) are based on bismaleimide (4) technology. Maleic anhydride reacts with a diamine to produce a diimide oligomer (7). Eurther reaction with additional diamine (Michael addition) yields polyaminohismaleimide prepolymer with terminal maleic anhydride double bonds. Cure is achieved by free-radical polymerization through the terminal double bonds. 

Of particular interest is the reaction of 5,5-disubstituted sulfur diimides (188) with oxalyl chloride in dilute solution in the presence of triethylamine. The l,2,5-thiadiazole-3,5-dione (189) was formed in almost quantitative yield (72LA(759)107). 

Certain N-substituted aziridines are particularly labile towards deamination. N-Aminoaziridines (271) decompose with high stereospecificity to alkenes and diimide between 20 and 60 °C in good yield (70HCA1479). 

Aziridine hydrazides, e.g. (310), undergo an interesting fragmentation reaction which results in ring opening and diimide formation (68JA3592). 

In the absence of ammonia and the concentration of polyamines being > 20 p.M the production of sediments take place. Ethylene diamine reacts with Hg(II) in the form of diimide -HNRNH- to form the insoluble complex IHgHNRNHHgl. In the presence of ammonia the production of sediments having complex composition is also possible. Given concentration of K Hgl 1-2 mM, NaOH 60-120 mM and compai able amounts of ammonia and ethylene diamine the products of reactions ai e only the soluble green-coloured complexes, bearing ammonia in the form of nitride and ethylene diamine in the form of diimide. Those complexes ai e polymers, with their absorption spectmms being different from those of the similar polymeric ammonia complexes. 

It is important to exclude air in all hydrazone-type reductions involving olefins (otherwise, over-reduction occurs due to diimide formation) in the above example, as an added precaution cyclohexene was used as a solvent. 

The accessibility of the +4 and +6 oxidation states for sulfur and, to a lesser extent, selenium gives rise to both acyclic and cyclic molecules that have no parallels in N-O chemistry. Thus there is an extensive chemistry of chalcogen diimides RN=E=NR (E = S, Se, Te) (Section 10.4). In the case of Te these unsaturated molecules form dimeric structures reflecting the increasing reluctance for the heavier chalcogens to form multiple bonds to nitrogen. The acyclic molecule N=Sp3,... 

N,N - Bis(trimethylsilyl)sulfur(rV) diimide Me3SiN=S=NSiMc3 is an especially versatile source of the N=S=N functionality in the formation of both acyclic and cyclic S-N compounds. It is conveniently prepared by the reaction of NaN(SiMc3)2 and thionyl chloride (Eq. 2.5). 

The Se NMR chemical shifts of Se-N compounds cover a range of >1500 ppm and the value of the shift is characteristic of the local environment of the selenium atom. As a result, Se NMR spectra can be used to analyse the composition of a complex mixture of Se-N compounds. For example, Se NMR provides a convenient probe for analyzing the decomposition of selenium(IV) diimides RN=Se=NR e.g., R = Bu). By this method it was shown that the major decomposition products are the six-membered ring (SeN Bujs, the five-membered ring Sc3(N Bu)2 and fifteen-membered ring Sc9(N Bu)6 (Figure 3.2 and Section 6.3). 

The salt K2[SN2] is an important reagent for the preparation of other sulfur diimide derivatives when MesSiNSNSiMes is not sufficiently reactive. For example, both acyclic and cyclic arsenic(Iir) compounds, Bu2AsNSNAs Bu2 and BuAs(NSN)2As Bu, respectively, have been obtained in this way." ... 

Protonation of the anion [SN2] by acetic acid in diethyl ether produces the thermally unstable sulfur diimide S(NH)2. Like all sulfur diimides, the parent compound S(NH)2 can exist as three isomers (Scheme 5.5). Ab initio molecular orbital calculations indicate that the (cis,cis) configuration is somewhat more stable than the (cis,trans) isomer, while the (trans,trans) isomer is expected to possess considerably higher energy. The alternative syn,anti or E,Z nomenclatures may also be used to describe these isomers. The structures of organic derivatives S(NR)2 (R = alkyl, aryl) are discussed in Section 10.4.2. 

Salts of mono-alkylated or arylated sulfur diimide anion [RNSN] (R = aryl, Bu, SiMcs) are prepared by Si-N cleavage of RNSNSiMcs with [(Me2N)3S][Mc3SiF2]. ° ° These anions adopt cis configurations with very short terminal S-N bond lengths (1.44 - 1.49 A) indicative of a thiazylamide anion, [RNS N] (5.21). ... 

The formal replacement of a sulfur atom in cyclo-S generates S7NH (6.1), the first member of a series of cyclic sulfur imides that includes the three diimides 1,3-, 1,4-, and 1,5-S6(NH)2 (6.2-6.4), two triimides 1,3,5-and 1,3,6-S5(NH)3, and S4N4H4 (6.5). Isomers of these ring systems containing adjacent NH groups are not known. 

Thionyl imide, HNSO, is a thermally unstable gas, which polymerizes readily. It can be prepared by the reaction of thionyl chloride with ammonia in the gas phase. Organic derivatives RNSO have higher thermal stability, especially when R = Ar. The typical synthesis involves the reaction of a primary amine or, preferably, a silylated amine with thionyl chloride. A recent example is the preparation of FcNSO (Fc = ferrocenyl) shown in Eq. 9.8. In common with other thionylimines, FcNSO readily undergoes SO2 elimination in the presence of a base, e.g., KO Bu, to give the corresponding sulfur diimide FcNSNFc. 

The photolysis of 10.3a in pentane or the reaction of 10.3a with PPhs generate the corresponding sulfur diimide ArN=S=NAr (Ar = 2,4- Bu2-6-MeC6H2) as the major product, presumably via the intermediate formation of the thionitrosoarene." By contrast, thermolysis in arene solvents results in ring closure to give the 2,1-benzisothiazole 10.4 and the corresponding aniline."... 

---