Polyisoprene difunctional

Along the same lines, Mandani et al.173 reacted a difunctional polyisoprene with silicon tetrachloride, to prepare bicyclic polyisoprenes. The only indication for the formation of the bicyclic homopolymer was the lower hydrodynamic volume obtained by SEC. However, the final polymer was not isolated for further characterization. 

The efficient light-initiated decomposition of azides has been the basis for commercially important photoresist formulations for the semiconductor industry. A common approach is to mix a diazide, such as diazadibenzylidenecyclohexanone (I), with an unsaturated hydrocarbon polymer. Excitation of the difunction-al sensitizer produces highly reactive nitrenes which crosslink the polymer by a variety of paths including insertion into both carbon-carbon double bonds and carbon-hydrogen bonds, and by generation of radicals. The polymer component in the most widely used resists is polyisoprene which has been partially eye Iized by reaction with p-toluenesulfonic acid G). Other polymers used include polycyclopentadiene and the copolymer of cyclopentadiene and a-methyI styrene ( ). 

Polymer Preparation. Two bifunctional (telechelic) polymers were used in this study. Carboxy-telechelic polybutadiene (PB) is commercially available from B. F. Goodrich (Hycar CTB 2000X156) with molecular characteristics of Mn=4,600, Mw/Mn= 1.8, functionality 2.00 and cis/trans/vinyl ratio of 20/65/15. Carboxy-telechelic polyisoprene (PIP) was prepared by anionic polymerization in THF at -78°C with a-methylstyrene tetramer as a difunctional initiator. The living macrodianions were deactivated by anhydrous carbon dioxide. Five polymers werejjrepared with Mn=6,000 10,000, 24,000, 30,000 and 37,000 having Mw/Mn=sl.l5 a microstructure ratio of 3, 4/1, 2 of 65/35, respectively, and a functionality >1.95. 

From the conversion dependence of the insolubilization process, it was concluded that both inter- and intramolecular propagation reactions occur during the polymerization of the epoxy ring. Blends of epoxidized polyisoprene and difunctional vinyl ether or aciylate monomers were shown to undergo a fast and extensive cross-linking polymerization, with formation of interpenetrating polymer networks. 

The photoinitiated cationic polymerization of liquid epoxidized polyisoprene is an efficient method to generate rapidly crosslinked elastomers. In the presence of a triarylsulfonium salt, the reaction develops readily upon UV exposure, with formation of both inter and intramolecular ether linkages. The formulation reactivity can be substantially enhanced by the addition of a difunctional vinyl ether or acrylate monomer, which acts as a reactive diluent and leads to the formation of an... 

Godt and coworkers [149] reported on the synthesis of poly(p-phenyleneethynylene)-block-polyisoprene and the transformation of such rod-coils into corresponding coil-rod-coil triblock copolymers. Luminescent rod-coil or coil-rod-coil di- or triblock copolymers were synthesized by mono- or difunctional atom transfer radical polymerization from oligo(p-phenyleneethynylene) [150],... 

---