Diethylzinc

Violent reactions can occur with halogens, halogenated hydrocarbons, nitroorganics, oxidizers, sulfur dioxide, and chlorides of phosphorus, arsenic, and antimony. With the latter compounds, diethylzinc forms pyrophoric triethylphosphine, triethyl arsine, and triethylstibine, respectively. 

Diethylmagnesinm catches fire spontaneonsly in air. It is snsceptible to glow and can catch fire in other gases, as well, that contain oxygen atoms in the molecnles, snch as N2O and even 02. It explodes with water. The ether soln-tion of the componnd is also snsceptible to ignition, upon contact with water (Bretherick 

It reacts violently with lower alcohols and ammonia (Sidgwick 1950). 

Being moisture sensitive, any accidental contact of the pure liquid or its concentrated solntion with the skin can cause a severe bum. 

---

Molecular weights of poly(propylene oxide) polymers of greater than 100,000 are prepared from catalysts containing FeCl (40,41). The molecular weight of these polymers is gready increased by the addition of small amounts of organic isocyanates (42). Homopolymers of propylene oxide are also prepared by catalysis using diethylzinc—water (43), diphenylzinc—water (44), and trialkyl aluminum (45,46) systems. 

Cocatalysts, such as diethylzinc and triethylboron, can be used to alter the molecular-weight distribution of the polymer (89). The same effect can also be had by varying the transition metal in the catalyst chromium-based catalyst systems produce polyethylenes with intermediate or broad molecular-weight distributions, but titanium catalysts tend to give rather narrow molecular-weight distributions. 

Cesium forms simple alkyl and aryl compounds that are similar to those of the other alkah metals (6). They are colorless, sohd, amorphous, nonvolatile, and insoluble, except by decomposition, in most solvents except diethylzinc. As a result of exceptional reactivity, cesium aryls should be effective in alkylations wherever other alkaline alkyls or Grignard reagents have failed (see Grignard reactions). Cesium reacts with hydrocarbons in which the activity of a C—H link is increased by attachment to the carbon atom of doubly linked or aromatic radicals. A brown, sohd addition product is formed when cesium reacts with ethylene, and a very reactive dark red powder, triphenylmethylcesium [76-83-5] (C H )2CCs, is formed by the reaction of cesium amalgam and a solution of triphenylmethyl chloride in anhydrous ether. 

N,N -Diethylbenzidine has been prepared by heating ethyl iodide, benzidine, and ethanol in a pressure tube at water-bath temperature, and by the reaction of diethylzinc on benzene-diazonium chloride. The method described here is a modification of that of Shah, Tilak, and Venkataraman. ... 

Diethylzinc Calcium Manganese (II) sulphide Trichloro(ethyl)silane... 

Diethylzinc l,3-bis(l-adamantyl)imidazol-2-ylidene adduct is known (93JOM(462)13). Bis(l,3-diphenylimidazol-2-ylidene) mercury(II) carbene complexes follow from the corresponding imidazolium perchlorate and mer-cury(II) chloride (68AGE682). 

Eor ethylzinc chloride, CH3CH2ZnCl, and ethylzinc bromide, CH3CH2ZnBr, there is a linear relationship between the observed chemical shift and the ratio of ethylzinc halide to diethylzinc. Extrapolation of these lines to x=l (mol fraction of CH3CH2Z11X) gives predicted values for the average chemical shift that closely match those measured for these species. This indicates that for these two organozinc halides, the Schlenk equilibrium lies heavily on the side of the ethylzinc halide in toluene. However, in the case of ethylzinc iodide, CH3CH2ZnI, there is a... 

In this model, the intermediacy of a monomeric zinc species is postulated. To support this assumption, an examination of the effect of stoichiometry and solvent in cyclopropanation involving the 2,4-pentanediol auxiliary was preformed [59]. In the initial reaction protocol, a large excess of both diethylzinc and diiodo-methane is employed. Such excessive conditions are justified on account of the instability of the zinc carbenoid under the reaction conditions. To minimize the un-... 

Although the previous protocol suggests it is not necessary to deprotonate the sulfonamide prior to exposure to the zinc carbenoid, a experimentally simpler procedure can be envisioned wherein the alcohol and promoter are deprotonated in a single flask (Fig. 3.15). In protocol IV, the alcohol and promoter are combined in flask A and are treated with diethylzinc, thus forming the zinc alkoxide and zinc sulfonamide. In sub-protocol IVa, this solution is transferred to flask C which contains the zinc carbenoid. Sub-protocol IVb represents the reversed addition order. Sub-protocol IVa is not only found to be the superior protocol in this sub-set, it is found to out-perform all of the previous protocols Despite the persistence of the induction period, a large rate enhancement over the uncatalyzed process is observed. This considerable rate enhancement also translates to a reduction in the overall reaction time when compared to sub-protocols la and Ilia. Selectivity rises... 

The first, and so far only, metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction of nitrile oxides with alkenes was reported by Ukaji et al. [76, 77]. Upon treatment of allyl alcohol 45 with diethylzinc and (l ,J )-diisopropyltartrate, followed by the addition of diethylzinc and substituted hydroximoyl chlorides 46, the isoxazolidines 47 are formed with impressive enantioselectivities of up to 96% ee (Scheme 6.33) [76]. 

An alternative method for generating enriched 1,2-diols from meso-epoxides consists of asymmetric copolymerization with carbon dioxide. Nozaki demonstrated that a zinc complex formed in situ from diethylzinc and diphenylprolinol catalyzed the copolymerization with cyclohexene oxide in high yield. Alkaline hydrolysis of the isotactic polymer then liberated the trans diol in 94% yield and 70% ee (Scheme 7.20) [40]. Coates later found that other zinc complexes such as 12 are also effective in forming isotactic polymers [41-42]. 

Since the addition of dialkylzinc reagents to aldehydes can be performed enantioselectively in the presence of a chiral amino alcohol catalyst, such as (-)-(1S,2/ )-Ar,A -dibutylnorephedrine (see Section 1.3.1.7.1.), this reaction is suitable for the kinetic resolution of racemic aldehydes127 and/or the enantioselective synthesis of optically active alcohols with two stereogenic centers starting from racemic aldehydes128 129. Thus, addition of diethylzinc to racemic 2-phenylpropanal in the presence of (-)-(lS,2/ )-Ar,W-dibutylnorephedrine gave a 75 25 mixture of the diastereomeric alcohols syn-4 and anti-4 with 65% ee and 93% ee, respectively, and 60% total yield. In the case of the syn-diastereomer, the (2.S, 3S)-enantiomer predominated, whereas with the twtf-diastereomer, the (2f ,3S)-enantiomer was formed preferentially. 

The first reported chiral catalysts allowing the enantioselective addition of diethylzinc to aryl aldehydes in up to 60% cc were the palladium and cobalt complexes of 1,7,7-trimethylbicy-clo[2.2.1. ]heptane-2,3-dione dioxime (A,B)3. A number of other, even more effective catalysts, based on the camphor structure (C K, Table 26) have been developed. 

In a flame-dried Schlenk tube 0.37 g(1.88 mmol) of (-)-3-exo-(dimethylamino)isoborneol (C) and 200 mL of dry toluene are placed under an atmosphere of argon. 27 mL of 4.2 M diethylzinc (113 mmol) in toluene are added and the resulting solution is stirred at 15°C for 15 min. After cooling to — 78°C, lOg (94.2 mmol) of benzaldehyde are added and the mixture is wanned to O C. After stirring for 6 h, the reaction is quenched by the addition of sat. NH4C1 soln. Extractive workup is followed by distillation yield 12.4 g (97%) 98% ee [determined by HPLC analysis. Baseline separation of rac-1 -phenyl-1 -propanol was achieved on a Bakerbond dinitrobenzoyl phenylglycine column (eluent 2-propanol/hexanc 1 3 flow rate l.OmL/ min detection UV 254 nm)] [a] 0 —47 (c = 6.11, CHC13). 

---