Dielectric constant various solvents

Luminescence has been used in conjunction with flow cells to detect electro-generated intennediates downstream of the electrode. The teclmique lends itself especially to the investigation of photoelectrochemical processes, since it can yield mfonnation about excited states of reactive species and their lifetimes. It has become an attractive detection method for various organic and inorganic compounds, and highly sensitive assays for several clinically important analytes such as oxalate, NADH, amino acids and various aliphatic and cyclic amines have been developed. It has also found use in microelectrode fundamental studies in low-dielectric-constant organic solvents. 

Table 12.4 Correlation of the enantioselectivity E of subtilisin in the transtesterification of racemic 1-phenylethanol in various organic solvents, and the dielectric constants eofthe solvents (Fritzpatrick, 1992).

It was also recognized that tha polarity of the solvents or solvent mixtures (quantified by the dielectric constant of solvents) can also determinate the composition of the crystallized diastereoisomeric salt.4 For example, in the resolution of a-aminocaprolactam (AC) with (S)-N-tosylphenylalanine ((S)-TsPA) in various solvents the (S)-AC was predominant when the dieledric constant of the solvent was e<27 or e>62. However, the salt of the antipode (R)-AC crystallized when the solvent was in meium polarity (29< <58).46,47,48... 

In the electrolytes used in lithium batteries, formulations based on single solvents are very rare. Most batteries employ electrolytes that are based on two or more solvents in which one ore more lithium salts are dissolved. Mixed solvents provide a strategy to meet diverse and often contradictory requirements for battery applications, for example, high fluidity vs. high dielectric constant. Thus, solvents of very different physical and chemical properties are used together to attain various... 

Solvent effects on chemical equilibria and reactions have been an important issue in physical organic chemistry. Several empirical relationships have been proposed to characterize systematically the various types of properties in protic and aprotic solvents. One of the simplest models is the continuum reaction field characterized by the dielectric constant, e, of the solvent, which is still widely used. Taft and coworkers [30] presented more sophisticated solvent parameters that can take solute-solvent hydrogen bonding and polarity into account. Although this parameter has been successfully applied to rationalize experimentally observed solvent effects, it seems still far from satisfactory to interpret solvent effects on the basis of microscopic infomation of the solute-solvent interaction and solvation free energy. 

The Structure of Ice and Water. It has not yet been necessary to consider in detail the properties of particular solvents. In Table 1 we gave a list of values for the dielectric constants of various solvents but apart from this we have not yet paid attention to the observed properties of solvents or of the ions which are commonly dissolved in them. Before continuing the discussion which was in progress in Sec. 23, it will be useful to review in some detail the state of our knowledge of the liquids which are used as solvents, and of the species of ions which are most often studied in solution. Although non-aqueous solutions are of great interest for the sake of comparison, nevertheless aqueous solutions are still of paramount importance, and we shall pay most of our attention to H20 and D20 and to ions dissolved in these liquids. 

Belonging to group (i) are alkylmetal carbonyls and cyclopentadienylmetal alkyl carbonyls of formula RMn(CO)5, CpFe(CO)2R, and CpMo(CO)3R. Solvent dependence of the reaction of MeMn(CO)5 with CjHi,NH2 is illustrated also in Table I. The rate varies markedly with the dielectric constant and with the nucleophilic power of the solvent. For example, on going from dimethylformamide to mesitylene, the rate of insertion is reduced by 10. Similarly, the sequence MeCN > MejCO > THF > CHCI3 > CjHj was reported for the reaction of MeMn(CO)5 with P(0CH2)3CR (R = Me and Et) in various solvents (97). Analogous trends were observed for the insertion reactions of CpFe(CO)2R and CpMo(CO)3R (48, 80, 98). 

When the silver nanocrystals are organized in a 2D superlattice, the plasmon peak is shifted toward an energy lower than that obtained in solution (Fig. 6). The covered support is washed with hexane, and the nanoparticles are dispersed again in the solvent. The absorption spectrum of the latter solution is similar to that used to cover the support (free particles in hexane). This clearly indicates that the shift in the absorption spectrum of nanosized silver particles is due to their self-organization on the support. The bandwidth of the plasmon peak (1.3 eV) obtained after deposition is larger than that in solution (0.9 eV). This can be attributed to a change in the dielectric constant of the composite medium. Similar behavior is observed for various nanocrystal sizes (from 3 to 8 nm). 

On the assumption that = 2, the theoretical values of the ion solvation energy were shown to agree well with the experimental values for univalent cations and anions in various solvents (e.g., 1,1- and 1,2-dichloroethane, tetrahydrofuran, 1,2-dimethoxyethane, ammonia, acetone, acetonitrile, nitromethane, 1-propanol, ethanol, methanol, and water). Abraham et al. [16,17] proposed an extended model in which the local solvent layer was further divided into two layers of different dielectric constants. The nonlocal electrostatic theory [9,11,12] was also presented, in which the permittivity of a medium was assumed to change continuously with the electric field around an ion. Combined with the above-mentioned Uhlig formula, it was successfully employed to elucidate the ion transfer energy at the nitrobenzene-water and 1,2-dichloroethane-water interfaces. 

The organic solvent should feature a low solubility in water and a high dielectric constant. Numerous studies have been reported for liquid-liquid junctions involving DCE [43,62,70,71,73], nitrobenzene [67,68,74,75], and nitrophenyloctylether (NPOE) [56]. Various hydrophobic electrolytes have been employed in these solvents. Tetraphenylarsonium (TPAs+) [[71,75,76], bis-triphenylphosphoranylidene (BTPPA+) [43,50], and hydrophobic tetra-arylammonium [77,78] are among the cations used in the organic phase. The choice for anions has been mostly restricted to borate derivatives, tetraphenylborate (TPB ) [70,79,80], tetrakis(4-chlorophenyl)borate (TPBCH) [43,81,82], and tetrakis(penta-fluoro)phenylborate (TPFB ) [49,83], as well as dicarbollyl-cobaltate [75]. 

The liquid-liquid interface is not only a boundary plane dividing two immiscible liquid phases, but also a nanoscaled, very thin liquid layer where properties such as cohesive energy, density, electrical potential, dielectric constant, and viscosity are drastically changed along with the axis from one phase to another. The interfacial region was anticipated to cause various specific chemical phenomena not found in bulk liquid phases. The chemical reactions at liquid-liquid interfaces have traditionally been less understood than those at liquid-solid or gas-liquid interfaces, much less than the bulk phases. These circumstances were mainly due to the lack of experimental methods which could measure the amount of adsorbed chemical species and the rate of chemical reaction at the interface [1,2]. Several experimental methods have recently been invented in the field of solvent extraction [3], which have made a significant breakthrough in the study of interfacial reactions. 

Fig. 3.22. Value B plotted as a function of dielectric constant s for various solvents (water, alcohols) for ZnO film in presence of oxygen...

The effect of mixing Ac for various liquids with different values of the dielectric constant e is seen from Fig. 4.26. At lower values of e of the solvent, critical concentration also decreases. Moreover, at... 

Many approaches have been used to correlate solvent effects. The approach used most often is based on the electrostatic theory, the theoretical development of which has been described in detail by Amis [114]. The reaction rate is correlated with some bulk parameter of the solvent, such as the dielectric constant or its various algebraic functions. The search for empirical parameters of solvent polarity and their applications in multiparameter equations has recently been intensified, and this approach is described in the book by Reich-ardt [115] and more recently in the chapter on medium effects in Connor s text on chemical kinetics [110]. 

Electrostatic effects other than ionization are also important. Interactions between reacting ions depend on the local electrical environment of the ions and thus reflect the influence of the dielectric constant of the solvent and the presence of other ions and various solutes that may be present. In dilute solutions the influence of ionic strength on reaction rates is felt in the primary and secondary salt effects (see below). 

Some physical properties of 3-propyl-4-ethylsydnone have been determined at various temperatures <1997BCJ315>. The dielectric constant (e = 64.6 at 25°C) is high compared to many organic solvents and close to that of propylene carbonate (e = 64.9), a typical nonaqueous polar solvent. 

Additional results of the enhancement in phenol conversion (to dihydroxy benzenes) and oxidation of allyl alcohol (to glycidol and allylic oxidation products) catalyzed by TS-1 in various solvents are illustrated in Fig. 46. In solvents with high dielectric constants, the heterolytic cleavage of the 0-0 bond... 

---