Dicarboxylic acids oxidative polymerization

From the preceding discussion, it is easily understood that direct polyesterifications between dicarboxylic acids and aliphatic diols (Scheme 2.8, R3 = H) and polymerizations involving aliphatic or aromatic esters, acids, and alcohols (Scheme 2.8, R3 = alkyl group, and Scheme 2.9, R3 = H) are rather slow at room temperature. These reactions must be carried out in the melt at high temperature in the presence of catalysts, usually metal salts, metal oxides, or metal alkoxides. Vacuum is generally applied during the last steps of the reaction in order to eliminate the last traces of reaction by-product (water or low-molar-mass alcohol, diol, or carboxylic acid such as acetic acid) and to shift the reaction toward the... 

The product of cross-linking and oxidation processes in drying oils is described as a porous polymeric fraction with a wide range of molecular weight. The chemical structure that can be influenced by age, thickness and the presence of pigments, while nonbonded species are present in the interstices free mono- and dicarboxylic acids, mono-, di- and triglycerides, aldehydes, ketones, etc. 

The largest commercial use of ethylene glycol is its reaction with dicarboxylic acids to form linear polyesters. Polyethylene terephthalate) [25038-59-9] (PET) is produced by esterification of terephthalic acid [100-21 -0] (1) to form bishydroxyethyl terephthalate [959-26-2] (BHET) (2). BHET polymerizes in a transesterification reaction catalyzed by antimony oxide to form PET (3). 

There are two principal synthetic routes to dicarboxylate complexes. One of these uses an aqueous solution of the alkali metal dicarboxylate and the corresponding metal halide,93 while the other depends upon the dicarboxylic acid reduction of higher oxidation state metals. This reductive property of oxalic acid results in its ready dissolution of iron oxides and hence a cleaning utility in nuclear power plants.94 Mention must also be made of the successful ligand exchange synthesis of molybdenum dicarboxylates, Mo(dicarboxylate)2 H2 O, from the corresponding acetate complex. Unfortunately the polymeric, amorphous and insoluble nature of these complexes has restricted the study of these systems, which may well provide examples of multiple M—M bonding in dicarboxylate coordination chemistry.95... 

Secondary Decomposition and Polymerization. Reactions which usually occur in the later stages of autoxidation at room temperature may assume increased significance, and their consequences may be encountered much more rapidly, at elevated temperatures. For example, the series of short chain esters, oxo-esters, and dicarboxylic acids - usually formed in only trace amounts in room-temperature oxidation of oleate, linoleate and linolenate - can be found in significant amounts after heating for 1 hr at 180°C. Possible reactions leading to the formation of such compounds are given below. 

The C8 aldehyde ester may be produced by cleavage of the 9-hydroperoxide of ethyl llnoleate followed by terminal hydroperoxidation. Further oxidation would produce the corresponding dicarboxylic acid which upon decarboxylation would give rise to ethyl heptanoate. The 8-alkoxy radical may also decompose to give the C7 alkyl radical, which would yield ethyl heptanoate or form a terminal hydroperoxide, and so on. Polymerization, both intra- and intermolecular, is also a major reaction in high temperature oxidation. Combination of alkyl, alkoxy, and peroxy radicals yields a variety of dimeric and polymeric compounds with C-O-C or C-O-O-C crosslinks. 

Poly(isobutylene) dicarboxylic acid was prepared by oxidation of the copolymer of isobutylene with a diene 53,54). The most efficient oxidizing agent was the system KMn04-periodic acid. Oxidation of a copolymer of isobutylene and 2,3-dimethyl-butadiene afforded a polymeric bis-ketone54). 

Bis(hydroxymethyl) furan and 5-hydroxymethyl furfural (available from C6 sugars) have been oxidized to furan-2,5-dicarboxylic acid (44)- Linear polyesters, polyurethanes, and polyamides containing these monomers have been described in the literature (45-43) and have been made via condensation polymerization techniques including bulk, solution, and interfacial mixing procedures. Gandini (5,34) reviewed the poly condensation reactions up to 1986 and... 

Carbodiimides are also used as catalysts in the formation of polyamides from dicarboxylic acids and diisocyanates. The carbodiimide catalyst is generated in situ from the diisocyanate using dimethylphospholene oxide as the catalyst. In this manner segmented thermoplastic poly(ether amides) and poly(ester amides) are obtained from the acid terminated monomers and diisocyanates by reaction polymerization processes. This reaction is best conducted in a vented extruder because carbon dioxide is the byproduct. 

AO containing various phenolic moieties were prepared by transesterification in the presence of tetraalkyl titanates. Randomly distributed -active moieties are characteristic of 140 (only the hard polyester segment is given) prepared from dimethyl terephthalate, 1,4-butanediol, poly(tetramethylene oxide)diol and dimethyl 5-(3,5-di-tm-butyl-4-hydroxybenzenepropaneamido)isophthalate [181]. The mentioned polymeric AO was used for stabilization of polyether-polyester elastomers. A partial attachement of tetrakis[methylene 3(3,5-di-tert-butyl-4-hydroxy-phenyl)propionate]methane (3) via transesterification reaction was expected in the synthesis of another polyether-polyester elastomer by [182]. A reversible redox polyester was formed from 2,5-bis(2-hydroxyethyl)hydroquinone and dichlorides of aliphatic dicarboxylic acids [137],... 

DSP was initially prepared by Franke (1905), and in 1958 Koelsch described briefly in an article on pyridine N-oxide derivatives that 2,5-distyrylpyrazine becomes white on exposure to uv-radiation, turning into an insoluble, possibly polymeric substance with a melting point of 331-333°C (Koelsch and Gumprecht, 1958). It was independently confirmed that a brilliant yellow crystal of 2,5-DSP was converted into powdery white substance ( a very fine crystalline substance ) under the action of sunlight in the course of a preparative study of pyrazine-2,5-dicarboxylic acid from... 

Determination of the residual antioxidant content in polymers by HPLC and MAE is one way to determine the amoimt needed for reasonable stabilization of a material, and also to compare different antioxidants and their individual efficiencies. During ageing and oxidation of PE, carboxyhc acids, dicarboxylic acids, alcohols, ketones, aldehydes, n-alkanes and 1-alkenes are formed [86-89]. The carboxyhc acids are formed as a result of various reactions of alkoxy or peroxy radicals [90]. The oxidation of polyolefins is generally monitored by various analytical techniques. GC-MS analysis in combination with a selective extraction method is used to determine degradation products in plastics. ETIR enables the increase in carbonyls on a polymer chain, from carboxylic acids, dicarboxyhc acids, aldehydes, and ketones, to be monitored. It is regarded as one of the most definite spectroscopic methods for the quantification and identification of oxidation in materials, and it is used to quantify the oxidation of polymers [91-95]. Mechanical testing is a way to determine properties such as strength, stiffness and strain at break of polymeric materials. 

Linear perfluoroalkylene ether dicarboxylic acids, HOOC-(CF2CF2OCF2CF2)nCOOH, are reported to have been prepared by UV-catalyzed coupling reactions (6) and oxidative polymerization reactions (11). Although these structures are considered to represent the preferred chain segments, the synthesis methods apparently have not been developed enough for commercial availability. 

Linear unsaturated and epoxidized polyesters via enzymatic polymerization were reported as well [58]. For this long-chain symmetrically unsaturated a,co-dicarboxylic acid dimethyl esters (C18, C20, C26) were synthesized using metathesis techniques from 9-decanoic, 10-undecanoic, and 13-tetradecanoic acid methyl esters, respectively. The dicarboxylic acid dimethyl esters were epoxidized via chemoenzymatic oxidation with hydrogen peroxide/methyl acetate and Novozym... 

Metal salts, like lithium chloride, significantly enhance reactions of carboxylic acids with amines promoted by triphenyl phosphite. This allows direct polycondensation of dicarboxylic acids with diamines and self-condensation of p-aminobenzoic acid. The presence of a solvent markedly enhances the reaction with the best results being obtained in A methylpyrrolidone. High molecular weight polyamides form. Mixed solvents, like pyridine and -methylpyrrolidone, can be used to form polyisophthalamides. This combination of solvents, however, yields only low molecular weight polyterephthalamides. On the other hand, when the reaction is carried out in the presence of polymeric matrices of poly(ethylene oxide) or poly(4-vinylpyridine), high molecular weight polyterephthalamides form . ... 

Cyclic Disulphides and Cyclic Diselenides.—Formation. No fundamentally new methods of synthesis of this class of compounds have been reported in the past two years. For l,2>dithiolan the oxidation of l,3>dithiols remains a favoured method, the use of iodine in the presence of triethylamine leading smoothly to 1,2-dithiolans without attendant polymerization. cis- and tra/ -l,2-Dithiolan-3,5-dicarboxylic acids were prepared from a diastereo-isomeric mixture of dimethyl 2,4-dibromoglutarates by sequential treatment with potassium thioacetate and potassium hydroxide in the presence of iodine,and jyn-2,3-dithiabicyclo[3,2,l]octan-8-ol was formed from 2,6-dibromocyclohexanone by successive treatment with potassium thiocyanate, lithium aluminium hydride, and iodine. The stereoselective formation of the less thermodynamically stable alcohol in this case was attributed partly to the formation of chelates with sulphur-aluminium bonds. 2,2-Dimethyl-l,3-dibromopropane was converted into 4,4-dimethyl-l,2-diselenolan on treatment with potassium selenocyanate at 175 °C, but at 140 °C the product was 3,3-dimethylselenetan. Reductive debenzylation of 2-alkylamino-l,3-bis(benzylthio)propanes with lithium in liquid ammonia and oxidation of the resultant dithiols with air afforded 4-dialkylamino-l,2-dithiolans, whilst treatment of a-bromomethyl-chalcone with sodium hydrosulphide gave, as minor product, trans-3 phenyl-4-benzoyl-l,2-dithiolan. Among the many products of thermal decomposition of /ra/ -2,4-diphenylthietan was l,4,5,7-tetraphenyl-2,3-dithiabicyclo [2,2,2]octane. ... 

Tetraaminobiphenyl and the dicarboxylic acids were used to produce PBI-PPA nanocomposite membrane by sol-gel method, where PPA acted as polycondensation agent and polymerization solvent [83]. Its fuel cell performance without external humidification revealed 0.2 A cm current density at 0.65 V and 160 °C. With oxygen as the oxidant, for the same current density, voltage was increased to 0.75 V. Inorganic proton conductors such as ZrP [84],... 

The use of tetracarboxylic acid anhydride instead of the dicarboxylic acids used in the manufacture of polyamides yields polyimides. The general method of preparation of the original polyimides by the polymerization of pyromellitic dianhydride and aromatic diamine is shown in Figure 1.18a. A number of diamines have been investigated, and it has been found that certain aromatic amines, which include m-phenylendediamine, benzidine, and di-(4-aminophenyl)ether, give polymers with a high degree of oxidative and thermal stability. 

---