Design Goals and Criteria

In order to provide economical competitiveness for the Super FR, the following design goals are established [1]. 

Core average power density over 100 W/cm including blanket region 

Core average linear heat rate around 17 kW/m 

Average fuel assembly discharge bumup around 70 MWd/kgHM 

Nonflat core in which active core height is similar to or larger than core equivalent diameter 

---

Priorities and evaluation criteria may be assigned to the accidents to indicate how conflicts are to be resolved, such as conflicts between safety goals or conflicts between mission goals and safety goals and to guide design choices at lower levels. The priorities are then inherited by the hazards related to each of the accidents and traced down to the safety-related design features. 

Validation Parameter Design/Plan Target Performance Goals and Acceptance Criteria ... 

As the goal of this book is to provide a sourcebook of practical information for all ranges of interest, its organization is aimed primarily at reader convenience. The main body, therefore, consists of a concise encyclopedia of knowledge useful in today s plastics industry. It contains an extensive array of materials information and property and performance data presented in an alphabetical format. In addition, it presents all-important application guidelines, process method trade-offs, and design, finishing, and performance criteria. It also summarizes chemical, structural, and other basic polymer considerations. 

We also asked two faculty in the department of architecture to rate the models produced during the experiment (in a unified file format and using randomized numerical identifiers). The criteria for evaluation were based on the three design goals described above (Section 0). 

Is it ensured that the technical evaluation of the proposed design includes a qualification with respect to the project s SHE goals, acceptance criteria and requirements ... 

---