Design definition

Kraft, B., Nagl, M. Visual knowledge specification for conceptual design Definition and tool support. Advanced Engineering Informatics 21(1), 67-83 (2007), http //dx.doi.org/10.1016/j.aei.2006.10.001... 

This is a combination of tasks starting with the product design definition and modeling by using... 

DIN ISO 5419 (1998) Spiralbohrer - benennungen, definitionen und formen (Twist drills - designations, definitions and geometries). Beuth, Berlin Domfeld D, Min S, Takeuchi Y (2008) Recent advances in mechanical micromachining. CIRP Ann Manuf Technol 2 745-768... 

Other less stringent hut scientifically defensible definitions of an LLOQ, which can be fit for purpose in some cases, are extensions of specific approaches to calibration design definitions of the LOD (see above). For example, one snch approach (Zom 1997) defines the LLOQ as the concentration (amount) corresponding to a signal Rq representing an increase over the intercept A that is 10... 

This, and other calibration design definitions of LLOQ (and LOD), have been critically evaluated (Zorn 1999). 

Detailed design definition, during which cycling design reviews take place in order to produce the final bi- dimensional drawings and the detailed design project ... 

The pre-commissioning safety report (PCmSR) provides confidence that the as-built plant meets the design definition and can be released for commissioning. 

Criterion 11. Provision for construction Design definition to include manufacturing, construction, assembly, and installation. 

These refractory products are heterogenous materials whose composition broadly consists of one or more minerals making up the refractory medittm as such, with or without additives which provide or reinforce specific properties, whose cohesion is ensured, before or during the installation of refractory hnings, by an appropriate binder. Added to these different constituents is an additional phase constituted by porosity (open or closed) of the product which greatly contributes to fixing the properties of the material. This design definition can be considered as universal with the exception of electrofused refractories (see section 10.2.4). 

---