Densities phases/compounds

Two structural modifications are known for Me307F compounds (Me = Nb or Ta), namely low-density and high-density phases, Nb307F and aTa307F or PTa307F, respectively [192,248-250]. 

Cubic BC2N. Hetero-diamond B C—N compounds have recently received a great interest because of their possible applications as mechanical and optical devices. The similar properties and structures of carbon and boron nitrides (graphite and hexagonal BN, diamond, and cubic BN) suggested the possible synthesis of dense compounds with all the three elements. Such new materials are expected to combine the best properties of diamond (hardness) and of c-BN (thermal stability and chemical inertness). Several low-density hexagonal phases of B,C, and N have been synthesized [534] while with respect to the high-density phases, different authors report contradictory data [535-538], but the final products are probably solid mixtures of c-BN and dispersed diamonds [539]. 

Another frequent mistake among students is to try to apply the ideal gas law to calculate the concentrations of species in condensed-matter phases (e.g., liquid or solid phases). Do not make this mistake] The ideal gas law only applies to gases. To calculate concentrations for liquid or solid species, information about the density (pj) of the liquid or solid phase is required. Both mass densities and molar densities (concentrations) as well as molar and atomic volumes may be of interest. The complexity of calculating these quantities tends to increase with the complexity of the material under consideration. In this section, we will consider three levels of increasing complexity pure materials, simple compounds or dilute solutions, and more complex materials involving mixtures of multiple phases/compounds. 

Calculating Densities/Concentrations for Mixtures of Multiple Phases/Compounds... 

As expected for a charge density wave (CDW) system, below the M-I transition, and for electrical fields high enough to depin the CDW, non-linear transport phenomena are observed in many a-phase compounds, namely those with M = Au and Pt [92—94]. In spite of the non-linear transport being a recent aspect of the research in this family of compounds, the experimental data already existing provides by far the strongest and more complete evidence for non-linear transport as due to a CDW motion in molecular conductors. The Au and Pt compounds with low transition temperatures at 8.2 and 12.2 K, have been more studied because their... 

Fig. 26. Superconducting critical temperature versus (a) number of valence electrons per atom, (b) mean volume and (c) electron density for C14(MgZn2) type Laves phase compounds (after Roberts...

The collection of representative reservoir fluid samples is important in order to establish the PVT properties - phase envelope, bubble point, Rg, B, and the physical properties - composition, density, viscosity. These values are used to determine the initial volumes of fluid in place in stock tank volumes, the flow properties of the fluid both in the reservoir and through the surface facilities, and to identify any components which may require special treatment, such as sulphur compounds. 

K. L. Komarek, ed.. Hafnium Physico-Chemical Properties of Its Compounds andEUhys, International Atomic Energy Agency, Vieima, 1981, pp. 11,13,14, 16. Covers tbermocbemical properties, phase diagrams, crystal stmcture, and density data on hafnium, hafnium compounds, and alloys. 

The freezing point diagram for the hydrazine—water system (Eig. 1) shows two low melting eutectics and a compound at 64 wt % hydrazine having a melting point of —51.6°C. The latter corresponds to hydrazine hydrate [7803-57-8] which has a 1 1 molar ratio of hydrazine to water. The anomalous behavior of certain physical properties such as viscosity and density at the hydrate composition indicates that the hydrate exists both in the Hquid as well as in the soHd phase. In the vapor phase, hydrazine hydrate partially dissociates. 

Reduction to Liquid Metal. Reduction to Hquid metal is the most common metal reduction process. It is preferred for metals of moderate melting point and low vapor pressure. Because most metallic compounds are fairly insoluble in molten metals, the separation of the Hquified metal from a sohd residue or from another Hquid phase of different density is usually complete and relatively simple. Because the product is in condensed form, the throughput per unit volume of reactor is high, and the number and si2e of the units is rninimi2ed. The common furnaces for production of Hquid metals are the blast furnace, the reverberatory furnace, the converter, the flash smelting furnace, and the electric-arc furnace (see Furnaces, electric). 

Polypropylene polymers are typically modified with ethylene to obtain desirable properties for specific applications. Specifically, ethylene—propylene mbbers are introduced as a discrete phase in heterophasic copolymers to improve toughness and low temperature impact resistance (see Elastomers, ETHYLENE-PROPYLENE rubber). This is done by sequential polymerisation of homopolymer polypropylene and ethylene—propylene mbber in a multistage reactor process or by the extmsion compounding of ethylene—propylene mbber with a homopolymer. Addition of high density polyethylene, by polymerisation or compounding, is sometimes used to reduce stress whitening. In all cases, a superior balance of properties is obtained when the sise of the discrete mbber phase is approximately one micrometer. Examples of these polymers and their properties are shown in Table 2. Mineral fillers, such as talc or calcium carbonate, can be added to polypropylene to increase stiffness and high temperature properties, as shown in Table 3. 

Iron carbide (3 1), Fe C mol wt 179.56 carbon 6.69 wt % density 7.64 g/cm mp 1650°C is obtained from high carbon iron melts as a dark gray air-sensitive powder by anodic isolation with hydrochloric acid. In the microstmcture of steels, cementite appears in the form of etch-resistant grain borders, needles, or lamellae. Fe C powder cannot be sintered with binder metals to produce cemented carbides because Fe C reacts with the binder phase. The hard components in alloy steels, such as chromium steels, are double carbides of the formulas (Cr,Fe)23Cg, (Fe,Cr)2C3, or (Fe,Cr)3C2, that derive from the binary chromium carbides, and can also contain tungsten or molybdenum. These double carbides are related to Tj-carbides, ternary compounds of the general formula M M C where M = iron metal M = refractory transition metal. 

Blends of isobutylene polymers with thermoplastic resins are used for toughening these compounds. High density polyethylene and isotactic polypropylene are often modified with 5 to 30 wt % polyisobutylene. At higher elastomer concentration the blends of butyl-type polymers with polyolefins become more mbbery in nature, and these compositions are used as thermoplastic elastomers (98). In some cases, a halobutyl phase is cross-linked as it is dispersed in the polyolefin to produce a highly elastic compound that is processible in thermoplastic mol ding equipment (99) (see Elastomers, synthetic-thermoplastic). ... 

---