Dehydrogenation catalyst application

Dehydrogenation catalysts, 23 336-337 cerium application, 5 687-688 Dehydrogenation reactors, 23 334-335 Dehydrogenation technology, fluidized bed, 20 779... 

The same reaction has been studied, in recent years, by Frisch and co-workers [2.43] using dense polymeric membranes. The dense polymeric membranes were prepared by blending polyethylacrylate with a 13X zeolite, which contained a dehydrogenation catalyst (Ti or Ni). They also prepared catalytic polymeric membranes by free radical polymerization of the monomer in the presence of the zeolite. These membranes were shown to be active for the cyclohexane dehydrogenation reaction at low temperatures. The recent development of thermally resistant polymeric membranes (Koros and Woods [2.44] and Rezac and Schoberl [2.45]) provides promise for the more widespread use of such membranes in CMR applications. 

Besides stmctural variety, chemical diversity has also increased. Pure silicon fonns of zeolite ZSM-5 and ZSM-11, designated silicalite-l [19] and silicahte-2 [20], have been synthesised. A number of other pure silicon analogues of zeolites, called porosils, are known [21]. Various chemical elements other than silicon or aluminium have been incoriDorated into zeolite lattice stmctures [22, 23]. Most important among those from an applications point of view are the incoriDoration of titanium, cobalt, and iron for oxidation catalysts, boron for acid strength variation, and gallium for dehydrogenation/aromatization reactions. In some cases it remains questionable, however, whether incoriDoration into the zeolite lattice stmcture has really occurred. 

The latest catalyst development is the contact DeH-9, which in terms of activity and stability is comparable with DeH-7 but with improved selectivity (fewer iso- and cycloparaffins and aromatics). This contact has been produced since 1990 and probably used commercially since 1992 [59]. In Table 7 the composition of the dehydrogenation products in relation to the catalyst and the application of the DeFine step is summarized. Table 8 shows the performance data for various catalysts [10] in relation to LAB production. 

As a new kind of carbon materials, carbon nanofilaments (tubes and fibers) have been studied in different fields [1]. But, until now far less work has been devoted to the catalytic application of carbon nanofilaments [2] and most researches in this field are focused on using them as catalyst supports. When most of the problems related to the synthesis of large amount of these nanostructures are solved or almost solved, a large field of research is expected to open to these materials [3]. In this paper, CNF is tested as a catalyst for oxidative dehydrogenation of propane (ODP), which is an attractive method to improve propene productivity [4]. The role of surface oxygen annplexes in catalyzing ODP is also addressed. 

One of the most studied applications of Catalytic Membrane Reactors (CMRs) is the dehydrogenation of alkanes. For this reaction, in conventional reactors and under classical conditions, the conversion is controlled by thermodynamics and high temperatures are required leading to a rapid catalyst deactivation and expensive operative costs In a CMR, the selective removal of hydrogen from the reaction zone through a permselective membrane will favour the conversion and then allow higher olefin yields when compared to conventional (nonmembrane) reactors [1-3]... 

The Raney nickel is a very efficient catalyst for the dehydrogenation of 2-butanol into butanone (Scheme 45) with a good selectivity (90%). But, for industrial applications selectivities as high as 99% are required. This can be achieved by poisoning some sites by reaction with Bu4Sn (the best results are obtained with a Sn/Ni ratio of 0.02), which probably occurs first on the sites responsible for the side reactions. The consequence is a slight decrease of the catalytic activity and an increase of the selectivity in 2-butanone which can reach 99%. This catalyst, developed by IFF, has been used commercially in Japan for several years [180]. 

Another recent patent (22) and related patent application (31) cover incorporation and use of many active metals into Si-TUD-1. Some active materials were incorporated simultaneously (e.g., NiW, NiMo, and Ga/Zn/Sn). The various catalysts have been used for many organic reactions [TUD-1 variants are shown in brackets] Alkylation of naphthalene with 1-hexadecene [Al-Si] Friedel-Crafts benzylation of benzene [Fe-Si, Ga-Si, Sn-Si and Ti-Si, see apphcation 2 above] oligomerization of 1-decene [Al-Si] selective oxidation of ethylbenzene to acetophenone [Cr-Si, Mo-Si] and selective oxidation of cyclohexanol to cyclohexanone [Mo-Si], A dehydrogenation process (32) has been described using an immobilized pincer catalyst on a TUD-1 substrate. Previously these catalysts were homogeneous, which often caused problems in separation and recycle. Several other reactions were described, including acylation, hydrogenation, and ammoxidation. 

Dehydrogenation activities, compared for tetralin and decalin [5,12] under the same superheated liquid-film conditions over the same Pt/C catalyst, exhibited around 3.9-63 times preference of tetralin (Table 13.3), which can certainly be ascribed to advantageous adsorption due to the a-bonding capability of its aromatic part [17-19]. It was, thus, confirmed experimentally that tetralin is superior to decalin as the organic hydrogen carrier for stationary applications in terms of rapid hydrogen supply or power density, provided that the density of fuel storage is unimportant. 

In this chapter, we have discussed the application of metal oxides as catalysts. Metal oxides display a wide range of properties, from metallic to semiconductor to insulator. Because of the compositional variability and more localized electronic structures than metals, the presence of defects (such as comers, kinks, steps, and coordinatively unsaturated sites) play a very important role in oxide surface chemistry and hence in catalysis. As described, the catalytic reactions also depend on the surface crystallographic structure. The catalytic properties of the oxide surfaces can be explained in terms of Lewis acidity and basicity. The electronegative oxygen atoms accumulate electrons and act as Lewis bases while the metal cations act as Lewis acids. The important applications of metal oxides as catalysts are in processes such as selective oxidation, hydrogenation, oxidative dehydrogenation, and dehydrochlorination and destructive adsorption of chlorocarbons. 

Skeletal catalysts are primarily used for hydrogenation and dehydrogenation reactions. The first application of skeletal nickel was hydrogenation of cottonseed oil [1], Skeletal catalysts have since... 

---