Degradation, gloves

Some glove suppliers also provide data on, or a noting of, degradation, i.e. die physical effects which a chemical will have upon a particular glove material. 

It is important to emphasize that often — but not always — the performance of a product with a chemical depends heavily on the manufacturer and a specific product model. A model that performs well with one chemical may perform poorly with another chemical, even when the chemicals are in the same chemical class. This is illustrated by the Edmont Model 37-165 glove which was tested against all five acids. This glove shows good protective properties with hydrochloric, perchloric, and phosphoric acids, but exhibits degradation in nitric and sulfuric acids. 

Rubber gloves Autoclave Gamma-radiation Ethylene oxide Sterilization Gamma-radiation If autoclave used, care with drying at end of process. Little oxidative degradation when high-vacuum autoclave used... 

Repeated visual examination and impedence measurements indicated no degradation of the electrode over the course of the experiments (3 weeks). During this time, the selected electrodes were stored in the inert-atmosphere glove box in which the electrochemical experiments were performed. No electrode pretreatment procedures were used and the crystals were not recleaved. 

The quality of the RNA is the most important factor for the success of array analysis, and great care should be taken to ensure top quality. It is essential to work as quickly as possible during cell disruption to denature RNAses found in tissue cells before they can degrade the sample RNA. RNAses are also found on lab benches and on hands. Therefore, RNAse decontamination of the bench area used for isolation of the RNA is recommended. This is done using RNAseZap. Gloves should be changed frequently. 

In all procedures prior to hybridization, utmost precautions must be taken to prevent the contamination of ribonucleases, which results in the degradation of cellular RNA. Gloves must be worn throughout the steps. PBS and water must be autoclaved and, if possible, should be treated with DEPC (trrNote 4). All containers must be clean and ribonuclease-free. Particularly, it is important that, if reused, 12-well plates and insert buckets are treated with HjOj and DEPC (rrrNote 5). 

Disposable gloves should be worn when you are handling the enzyme container. Remove the enzyme from the freezer just before you need it. Store the enzyme in an ice bucket when it is outside the freezer. The enzyme should never be stored at room temperature. Because of high cost, digestion by restriction enzymes is carried out on a microscale level. A typical reaction mixture will contain about 1 fig or less of DNA and 1 unit of enzyme in the appropriate incubation buffer. One unit is the amount of enzyme that will degrade 1 fig of A. phage DNA in 1 hour at the optimal temperature and pH. The total reaction volume is usually between 20 and 50 fiL. Incubation is most often carried out at the recommended temperature for about 1 hour. The reaction is stopped by adding EDTA solution, which complexes divalent metal ions essential for nuclease activity. 

In a typical degradation test, a specimen from the PPE or, in some cases (e.g., a glove), the entire item is immersed in the pesticide for some period of time. At predetermined intervals, the specimen is removed, tested, and observed. In the laboratory, strength, puncture, and tear properties are commonly measured using a machine with which the specimen is stretched and the force required to stretch the specimen recorded. Significant increases or decreases (+20%) in any of the properties would be indicative of poor resistance to the pesticide formulation. Losses in these properties would generally result from the sorption of one or more components of the pesticide formulation by the glove material. 

The solntions that contain an organic solvent usually in the form of emnlsifiable concentrates and field application dilutions of such concentrates, represent the greatest potential challenge to the barrier effectiveness of polymeric gloves. Many of the solvents can severely degrade or permeate the glove materials when in nndilnted form. 

When selecting the type and manufacture of the PPE, the purchaser should understand the functions being preformed by the responder and the chemical and physical hazards associated with the operation. They must also know how the operation and chemical will effect the degradation of the suit, gloves, and boots and the tactility and dexterity needed by the responder. Especially when Levels A and B equipment is in use, it is important not to overlook nonchemical hazards, such as heat stress, cold stress, slip, trip and falls, moving equipment, and lifting. 

Frozen tumor sample size approximately 5x2x2 mm remove in frozen condition. Remember to wear gloves for prevention of RNA degradation. Perform the dissection with a disposable scalpel in a sterile Petri dish on dry ice to avoid thawing. 

---