Cyclopentadiene, Diels- Alder cycloaddition

The synthesis of natural products containing the quinonoid stmcture has led to intensive and extensive study of the classic diene synthesis (77). The Diels-Alder cycloaddition of quinonoid dienophiles has been reported for a wide range of dienes (78—80). Reaction of (2) with cyclopentadiene yields (79) [1200-89-1] and (80) [5439-22-5]. The analogous 1,3-cyclohexadiene adducts have been the subject of C-nmr and x-ray studies, which indicate the endo—anti—endo stereostmcture (81). 

Figure 3.5-2 Diels-Alder cycloaddition between cyclopentadiene and methyl acrylate.

In contrast to those unreactive dienes that can t achieve an s-cis conformation, other dienes are fixed only in the correct s-cis geometry and are therefore highly reactive in the Diels-Alder cycloaddition reaction. 1,3-Cyclopentadiene, for example, is so reactive that it reacts with itself. At room temperature, 1,3-cycIopentadiene dimerizes. One molecule acts as diene and a second molecule acts as dienophile in a self Diels-Alder reaction. 

Cyclopentadiene is very reactive in Diels-Alder cycloaddition reactions, but 1,3-cyclohexadiene is less reactive and 1,3-cycloheptadiene is nearly inert. Explain. (Molecular models are helpful.)... 

The enantiomerically pure, doubly activated a, /j-olefinic sulfoxides 46-5095 98 undergo highly diastereoselective Diels-Alder cycloadditions with cyclopentadiene, and pyridyl vinylic sulfoxide 5199 reacts diastereoselectively with furan. It is noteworthy that olefins singly-activated by only a sulfinyl group are not effective partners in Diels-Alder cycloadditions, as we have found after many attempts and as has been reported recently98. 

Bolm et al. [106] have carefully studied the synthesis and the hganding ability of salen-like bis(sulfoximines). The chirahty which is indeed generally introduced via the use of chiral diamines in the salen series, is in sulfoximines present via the sulfur atom. They investigated the Diels-Alder cycloaddition between cyclopentadiene and acryloyl-2-oxazolidinones with various bis(sulfoximines) (see Scheme 42) and Cu(OTf)2 as the copper source [107]. 

MCP (1) is not known to undergo [4 + 2] cycloadditions. The substitution of two, or more, ring protons with fluorine atoms, however, seems to improve dramatically the dienophilic reactivity of the exocyclic double bond. 2,2-Di-fluoromethylenecyclopropane (5) is a quite reactive dienophile in Diels-Alder cycloadditions. With cyclopentadiene (6) and furan (7), it formed two isomeric adducts (Scheme 1) [9]. In both cases the adduct with the endo CF2 group is the major isomer. 

Microwave heating has also been employed for performing retro-Diels-Alder cycloaddition reactions, as exemplified in Scheme 6.94. In the context of preparing optically pure cross-conjugated cydopentadienones as precursors to arachidonic acid derivatives, Evans, Eddolls, and coworkers performed microwave-mediated Lewis acid-catalyzed retro-Diels-Alder reactions of suitable exo-cyclic enone building blocks [193, 194], The microwave-mediated transformations were performed in dichloromethane at 60-100 °C with 0.5 equivalents of methylaluminum dichloride as catalyst and 5 equivalents of maleic anhydride as cyclopentadiene trap. In most cases, the reaction was stopped after 30 min since continued irradiation eroded the product yields. The use of short bursts of microwave irradiation minimized doublebond isomerization. 

A rapid access to carbocyclic nucleosides, containing a fused isoxazoline ring has been proposed, starting from cyclopentadiene. The route involves a het-ero Diels-Alder cycloaddition reaction of nitrosocarbonylbenzene followed by a 1,3-dipolar cycloaddition of nitrile oxides, cleavage of the N-0 tether and transformation of the heterocyclic aminols into nucleosides via construction of purine and pyrimidine heterocycles (457). 

The phosphino-oxazoline copper(II) complex (55) has also been found to be an effective catalyst[136] as have some titanium complexes, such as the extensively researched titanium-TADDOL system (56)[137]. A modified Ti(IV)-TADDOL compound is the catalyst of choice to promote Diels-Alder cycloaddition reactions between cyclopentadiene and alk-2-enyl phenylsulfonylmethyl ketones[138]. 

The asymmetric Diels-Alder cycloadditions of enantiopure (5)-5-(/ -tolylsulfinyl)-1,4-benzoquinones with Dane s diene under thermal and Lewis acid conditions produce tetracyclic quinones after spontaneous elimination of the sulfinyl group.The Diels-Alder reaction of barrelene with o-benzoquinone produces tetracyclo[6.2.2.2 .0 ]tetradeca-9,ll,13-triene-4,5-dione. Under kinetic control, the Diels-Alder cycloaddition of 2,3-dicyano-p-benzoquinone (98) with cyclopentadiene in MeOH produces the single cycloadduct (99) (Scheme 38). ... 

An extensive review of the use of chiral Lewis acid catalysts in Diels-Alder cycloadditions has been presented. Brpnsted acid-assisted chiral Lewis acids have been shown to be highly efficient catalysts for the enantioselective Diels-Alder reactions of a- and /3-substituted-Q, /i-enals with numerous dienes. The chiral Lewis acid-catalysed Diels-Alder reaction between cyclopentadiene and alkenoyloxazolidi-nones can be catalysed by bis(oxazolone)magnesium catalysts. ... 

An unusual Diels-Alder cycloaddition involving the Cp=Cy bond has been described. The reaction took place by treatment of the electron-deficient allenylidene moiety in complex [RuCp(=C=C=CPh2)(CO)(P -Pr3)][BF4] (46) with a 20-fold excess of isoprene at room temperature affording the cycloadduct 90 (Scheme 33) [287]. This Diels-Alder cycloaddition in which the allenylidene moiety acts as a dienophile was completely regioselective, only the Cp=Cy bond of the allenylidene skeleton being implicated. Furthermore, it was also regioselective with regard to the orientation of the diene with the exclusive attack of C(l) and C(4) carbons at the Cp and Cy positions, respectively. Allenylidene 46 also underwent Diels-Alder reactions with cyclopentadiene and cyclohexadiene to afford the... 

Chinese chemists have reported the synthesis of pentacyclo[4.3.0.0 , 0 ]nonane-2,4-bis(trinitroethyl ester) (88). This compound may find potential use as an energetic plastisizer in futuristic explosive and propellant formulations. The synthesis of (88) uses widely available hydroquinone (81) as a starting material. Thus, bromination of (81), followed by oxidation, Diels-Alder cycloaddition with cyclopentadiene, and photochemical [2 - - 2] cycloaddition, yields the dione (85) as a mixture of diastereoisomers, (85a) and (85b). Favorskii rearrangement of this mixture yields the dicarboxylic acid as a mixture of isomers, (86a) and (86b), which on further reaction with thionyl chloride, followed by treating the resulting acid chlorides with 2,2,2-trinitroethanol, gives the energetic plastisizer (88) as a mixture of isomers, (88a) and (88b). Improvements in the synthesis of nitroform, and hence 2,2,2-trinitroethanol, makes the future application of this product attractive. 

Electrophilic alkenes have been appended to imidazolium-type ILs for use in the Diels-Alder cycloaddition, 1,4-addition, Heck and Stetter reactions.Electrophilic alkenes containing Wang-type linkers were alkylated to imidazole followed by ion exchange and esterification giving the desired TSIL. Diels-Alder cycloaddition was carried out with 2,3-dimethylbutadiene and cyclopentadiene to give corresponding adducts. After washing with ether, transesterification resulted in cyclohexene derivatives. Scheme 29. 

Oppolzer sultam-like chiral auxiliary (e.g., Xc in 304) has been studied in Diels-Alder cycloaddition reactions (Scheme 43) <2003JP0700>. The TiCU-promoted reaction of dienophile 304 and 1,3-cyclopentadiene 305 in DCM is complete within 18h and excellent diastereoselectivity of product 306 is observed. The same reaction in the absence of Lewis acid provides product 306 in very low yield. However, switching to trifluoroethanol as the solvent, the cycloaddition reaction proceeds to completion, albeit with slightly diminished levels of diastereoselectivity for Diels-Alder adduct 306. Surprisingly, the use of hexane as the solvent affords the opposite (23, J 31-diastereomer of 306 as the major product. 

Additional animations show the positive nature of the hydrogen being transferred during pyrolysis of ethyl formate and the fact that the two new carbon-carbon bonds are formed at dilferent rates during Diels-Alder cycloaddition of cyclopentadiene and acrylonitrile. 

Individual activation energies from BP, BLYP, EDFl and B3LYP density functional models are similar (and different from those of Hartree-Fock and local density models). They are both smaller and larger than standard values, but typically deviate by only a few kcal/mol. The most conspicuous exception is for Diels-Alder cycloaddition of cyclopentadiene and ethylene. Density functional models show activation energies around 20 kcaPmol, consistent with the experimental estimate for the reaction but significantly larger than the 9 kcal/mol value obtained from MP2/6-311+G calculations. Overall, density functional models appear to provide an acceptable account of activation energies, and are recommended for use. Results from 6-3IG and 6-311+G basis sets are very similar, and it is difficult to justify use of the latter. 

A good example for which experimental data are available, involves activation energies for Diels-Alder cycloadditions of different cyanoethylenes as dienophiles with cyclopentadiene, relative to the addition of acrylonitrile with cyclopentadiene as a standard. 

Table 9-4 Relative Activation Energies of Diels-Alder Cycloadditions of Cyclopentadiene and Electron-Deficient Dienophiles ... 

Table 9-5 Regio and Stereoselectivity in Diels-Alder Cycloadditions of Substituted Cyclopentadienes with Acrylonitrile ... 

Consider, for example, endolexo selectivity in the Diels-Alder cycloaddition of cyclopentadiene and 2-butanone. In cyclopentadiene as a solvent, the observed endolexo product ratio is 80 20 (endo preferred), corresponding to a transition state energy difference on the order of 0.5 kcal/mol. With water as the solvent, this ratio increases to 95 5, corresponding to an energy difference on the order of 2 kcal/ mol. Hartree-Fock 6-3IG caleulations on the respective endo and exo transition states are largely in accord. Uncorrected for solvent, they show a very slight (0.3 kcal/mol) preference for endo in accord with the data in (non-polar) cyclopentadiene. This preference increases to 1.5 kcal/mol when the solvent is added (according to the Cramer/... 

Table 12-17 Effect of Choice of Geometry on Relative Energies of Regio and Stereochemical Prodncts of Diels-Alder Cycloadditions of Snbstitnted Cyclopentadienes with Acrylonitrile/ 6-31G Model... 

Diels-Alder cycloaddition of 1,3-butadiene and acrylonitrile is significantly slower than the analogous reaction involving cyclopentadiene. Might this simply be a consequence of the difference in energy between the ground-state trans conformer of butadiene and the cA like conformer which must be adopted for reaction to occur, or does it reflect fundamental differences between the two dienes That is, are activation energies for Diels-Alder cycloaddition of cA-butadiene and of cyclopentadiene actually similar ... 

Figures 15-1 and 15-2 provide evidence for the extent to which transition states for closely-related reactions are very similar. Figure 15-1 compares the transition state for pyrolysis of ethyl formate (leading to formic acid and ethylene) with that for pyrolysis of cyclohexyl formate (leading to formic acid and cyclohexene). Figure 15-2 compares the transition state for Diels-Alder cycloaddition of cyclopentadiene and acrylonitrile with both syn and anti transition states for cycloaddition of...

---