Cyclohexene Diels-Alder reaction

Step through the sequence of structures corresponding to the combination of c/s -1,3-butadiene and ethene to give cyclohexene (Diels-Alder reaction). 

Since cyclohexenes can also be made by the Diels-Alder reaction (frames 5-8) we have access to a wide range of 1,6-dicarbonyl compounds. How about TM 196 ... 

A major difficulty with the Diels-Alder reaction is its sensitivity to sterical hindrance. Tri- and tetrasubstituted olefins or dienes with bulky substituents at the terminal carbons react only very slowly. Therefore bicyclic compounds with polar reactions are more suitable for such target molecules, e.g. steroids. There exist, however, several exceptions, e. g. a reaction of a tetrasubstituted alkene with a 1,1-disubstituted diene to produce a cyclohexene intermediate containing three contiguous quaternary carbon atoms (S. Danishefsky, 1979). This reaction was assisted by large polarity differences between the electron rich diene and the electron deficient ene component. 

Cyclohexene derivatives can be oxidatively cleaved under mild conditions to give 1,6-dicarbonyl compounds. The synthetic importance of the Diels-Alder reaction described above originates to some extent from this fact, and therefore this oxidation reaction is discussed in this part of the book. 

In antithetical analyses of carbon skeletons the synthon approach described in chapter I is used in the reverse order, e.g. 1,3-difunctional target molecules are "transformed" by imaginary retro-aldol type reactions, cyclohexene derivatives by imaginary relro-Diels-Alder reactions. 

The alkene that adds to the diene is called the dienophile Because the Diels-Alder reaction leads to the formation of a ring it is termed a cycloaddition reaction The prod uct contains a cyclohexene ring as a structural unit... 

Section 10 12 Conjugate addition of an alkene (the dienophile) to a conjugated diene gives a cyclohexene derivative in a process called the Diels-Alder reaction It is concerted and stereospecific substituents that are cis to each other on the dienophile remain cis m the product... 

Diels-Alder reaction (Section 10 12) Conjugate addition of an alkene to a conjugated diene to give a cyclohexene denva tive Diels-Alder reactions are extremely useful in synthesis... 

Diels-Alder Reactions. The important dimerization between 1,3-dienes and a wide variety of dienoplules to produce cyclohexene derivatives was discovered in 1928 by Otto Diels and Kurt Alder. In 1950 they won the Nobel prize for their pioneering work. Butadiene has to be in the j -cis form in order to participate in these concerted reactions. Typical examples of reaction products from the reaction between butadiene and maleic anhydride (1), or cyclopentadiene (2), or itself (3), are <7 -1,2,3,6-tetrahydrophthaHc anhydride [27813-21 -4] 5-vinyl-2-norbomene [3048-64-4], and 4-vinyl-1-cyclohexene [100-40-3], respectively. 

The primary and secondary products of photolysis of common diazirines are collected in Table 4. According to the table secondary reactions include not only isomerization of alkenes and hydrogen elimination to alkynes, but also a retro-Diels-Alder reaction of vibrationally excited cyclohexene, as well as obvious radical reactions in the case of excited propene. 

Other methods for the preparation of cyclohexanecarboxaldehyde include the catalytic hydrogenation of 3-cyclohexene-1-carboxaldehyde, available from the Diels-Alder reaction of butadiene and acrolein, the reduction of cyclohexanecarbonyl chloride by lithium tri-tcrt-butoxy-aluminum hydride,the reduction of iV,A -dimethylcyclohexane-carboxamide with lithium diethoxyaluminum hydride, and the oxidation of the methane-sulfonate of cyclohexylmethanol with dimethyl sulfoxide. The hydrolysis, with simultaneous decarboxylation and rearrangement, of glycidic esters derived from cyclohexanone gives cyclohexanecarboxaldehyde. 

Cycloaddition involves the combination of two molecules in such a way that a new ring is formed. The principles of conservation of orbital symmetry also apply to concerted cycloaddition reactions and to the reverse, concerted fragmentation of one molecule into two or more smaller components (cycloreversion). The most important cycloaddition reaction from the point of view of synthesis is the Diels-Alder reaction. This reaction has been the object of extensive theoretical and mechanistic study, as well as synthetic application. The Diels-Alder reaction is the addition of an alkene to a diene to form a cyclohexene. It is called a [47t + 27c]-cycloaddition reaction because four tc electrons from the diene and the two n electrons from the alkene (which is called the dienophile) are directly involved in the bonding change. For most systems, the reactivity pattern, regioselectivity, and stereoselectivity are consistent with describing the reaction as a concerted process. In particular, the reaction is a stereospecific syn (suprafacial) addition with respect to both the alkene and the diene. This stereospecificity has been demonstrated with many substituted dienes and alkenes and also holds for the simplest possible example of the reaction, that of ethylene with butadiene ... 

Another stereochemical feature of the Diels-Alder reaction is addressed by the Alder rule. The empirical observation is that if two isomeric adducts are possible, the one that has an unsaturated substituent(s) on the alkene oriented toward the newly formed cyclohexene double bond is the preferred product. The two alternative transition states are referred to as the endo and exo transition states ... 

Table 12.1 Diels-Alder reaction of butadiene and ethylene to form cyclohexene...

In the Diels-Alder transition state, the two alkene carbons and carbons 1 and 4 of the diene rehybridize from sp2 to sp 5 to form two new single bonds, while carbons 2 and 3 of the diene remain sp2-hybridized to form the new double bond in the cyclohexene product. We ll study this mechanism at greater length in Chapter 30 but will concentrate for the present on learning more about the characteristics and uses of the Diels-Alder reaction. 

One of the most useful features of the Diels-Alder reaction is that it isstaeo-specific, meaning that a single product stereoisomer is formed. Furthermore, the stereochemistry of the reactant is maintained. If we carry out the cycloaddition with a cis dienophile, such as methyl ds-2-butenoate, only the cis-substituted cyclohexene product is formed. With methyl tmtts-2-butenoate, only thetrans-substituted cyclohexene product is formed. 

The Diels-Alder cycloaddition reaction (Section 14.4) is a pericvclic process that takes place between a diene (four tt electrons) and a dienophile (two tr electrons) to yield a cyclohexene product. Many thousands of examples of Diels-Alder reactions are known. They often take place easily at room temperature or slightly above, and they are stereospecific with respect to substituents. For example, room-temperature reaction between 1,3-butadiene and diethyl maleate (cis) yields exclusively the cis-disubstituted cyclohexene product. A similar reaction between 1,3-butadiene and diethyl fumarate (trans) yields exclusively the trans-disubstituted product. 

Cycioaddition reaction (Sections 14.4, 30.6) A peri cyclic reaction in which two reactants add together in a single step to yield a cyclic product. The Diels-Alder reaction between a diene and a dienophile to give a cyclohexene is an example. 

Removal of the carbonate ring from 7 (Scheme 1) and further functional group manipulations lead to allylic alcohol 8 which can be dissected, as shown, via a retro-Shapiro reaction to give vinyl-lithium 9 and aldehyde 10 as precursors. Vinyllithium 9 can be derived from sulfonyl hydrazone 11, which in turn can be traced back to unsaturated compounds 13 and 14 via a retro-Diels-Alder reaction. In keeping with the Diels-Alder theme, the cyclohexene aldehyde 10 can be traced to compounds 16 and 17 via sequential retrosynthetic manipulations which defined compounds 12 and 15 as possible key intermediates. In both Diels-Alder reactions, the regiochemical outcome is important, and special considerations had to be taken into account for the desired outcome to. prevail. These and other regio- and stereochemical issues will be discussed in more detail in the following section. 

Highly functionalized cyclohexenes have been prepared by Diels-Alder reactions of butadienes 1 (Scheme 2.1) and chiral butadienes 2 (Scheme 2.2) with... 

Diels-Alder reaction of 2-cyclohexen-l-one (37) with diene 38 mainly afforded the exo adduct 39, the key intermediate in the synthesis of the bottom half of chlorothricolide [14] (Equation 5.4). 

Harano and colleagues [48] found that the reactivity of the Diels-Alder reaction of cyclopentadienones with unactivated olefins is enhanced in phenolic solvents. Scheme 6.28 gives some examples of the cycloadditions of 2,5-bis-(methoxycar-bonyl)-3,4-diphenylcyclopentadienone 45 with styrene and cyclohexene in p-chlorophenol (PCP). Notice the result of the cycloaddition of cyclohexene which is known to be a very unreactive dienophile in PCP at 80 °C the reaction works, while no Diels-Alder adduct was obtained in benzene. PCP also favors the decarbonylation of the adduct, generating a new conjugated dienic system, and therefore a subsequent Diels-Alder reaction is possible. Thus, the thermolysis at 170 °C for 10 h of Diels-Alder adduct 47, which comes from the cycloaddition of 45 with 1,5-octadiene 46 (Scheme 6.29), gives the multiple Diels-Alder adduct 49 via decarbonylated adduct 48. In PCP, the reaction occurs at a temperature about 50 °C lower than when performed without solvent, and product 49 is obtained by a one-pot procedure in good yield. 

The cyclohexene (ring C) can be disconnected by a Diels-Alder reaction to reveal enone (32) and diene (33). Pour chiral centres remain in (32) so three are Introduced in the Diels-Alder reaction. 

The Diels-Alder reaction is an organic chemical reaction (specifically, a cycloaddition) between a conjugated diene and a substituted alkene, commonly termed the dienophile, to form a substituted cyclohexene system. The reaction can also proceed if the alkene is replaced by an alkyne moiety or even if some of the atoms... 

Neier and coworkers have used a domino Diels-Alder/Ireland-Claisen process for the synthesis of (rac)-juvabione 4-46 and (rac)-epijuvabione [15]. Since neither the Diels-Alder reaction of the acetal 4-44 and methyl acrylate nor the sigmatropic rearrangement seemed to be stereoselective, these authors obtained the cyclohexene derivative 4-45 as a mixture of three diastereomers (Scheme 4.9). 

Chiral (Acyloxy)borane Complex Catalyzed Asymmetric Diels-Alder Reaction (1 R)-1,3,4-Trimethyl-3-cyclohexene-1-carboxaldehyde. 

Retro-Diels-Alder reactions can be used to regenerate dienes or alkenes from Diels-Alder protected cyclohexene derivatives under pyrolytic conditions144. Most of the synthetic utility of this reaction comes from releasing the alkene by diene-deprotection. However, tetralin undergoes cycloreversion via the retro-Diels-Alder pathway to generate o-quinodimethane under laser photolysis (equation 89)145. A precursor of lysergic acid has been obtained by deprotection of the conjugated double bond and intramolecular Diels Alder reaction (equation 90)146. 

As shown in (5.84b), the characteristic feature of the Diels-Alder reaction is the addition of an ethylenic double bond (dienophile) across the 1,4-positions of a conjugated diene to give a cyclohexene ring product. The ethylenic bond is usually... 

Figure 5.60 The transition-state region of the reaction profile (along the IRC) for the model butadiene + ethylene Diels-Alder reaction. (The zero of energy corresponds to the cyclohexene product.)...

Figure 5.60 displays a portion of the Diels-Alder reaction profile in the neighborhood of the TS complex. In this case the IRC profile is rather unsymmetric around s = 0, ascending slowly from the reactant side toward the TS summit, then plummeting rapidly toward the product cyclohexene limit, which lies about 29 kcal mol-1 below the reactants (and 54 kcal mol-1 below the TS). 

The intramolecular Diels-Alder reaction has become one of the most promising methods for the construction of complex cyclohexene moieties 104). In view of the fact that cyclobutenes rearrange thermally and conrotatary to butadienes (Eq. (9))8l l05) and their willingness to undergo Diels-Alder reactions with dienophiles (Eq. (10))... 

---