Cyclohexanone alkylation

Numerous chiral amines are reported to be useful in the asymmetric alkylation reaction of carbonyl compounds via their imine derivatives (see Section 1.1.1.4.1.)2,4. The asymmetric alkylation of chiral imines was first reported using simple, commercially available amines such as a-methylbenzeneethanamine (amphetamine)1, benzeneethanamine1 5 and exo-l, 7,7-trimethyl-bicyclo[2.2.1]heptan-2-amine (isobomylamine). In the case of cyclohexanone alkylation using these chiral auxiliaries, enantiomeric excesses of up to 72% were obtained1. 

The same authors studied the stereochemistry of alkylation of 4-t-butyl-cyclohexanone. Alkylation of enolate ion 467 with triethyloxonium fluorobor-ate yielded a mixture of 0-alkyl product and approximately equal amounts of... 

The overall process, from carbonyl compound to carbonyl compound, amounts to an enolate alkylation, but no strong base or enolates are involved so there is no danger of self-condensation. The example below shows two specific examples of cyclohexanone alkylation using enamines. Note the relatively high temperatures and long reaction times enamines are among the most reactive of neutral nucleophiles, but they are still a lot less nucleophilic than enolates. 

Their stability at low temperature means that lithium enolates are usually preferred, but sodium and potassium enolates can also be formed by abstraction of a proton by strong bases. The increased separation of the metal cation from the enolate anion with the larger alkali metals leads to more reactive but less stable enolates. Typical very strong Na and K bases include the hydrides (NaH, KH) or amide anions derived from ammonia (NaNH2, KNH2) or hexamethyldisilazane (NaHMDS, KHMDS). The instability of the enolates means that they are usually made and reacted in a single step, so the base and electrophile need to be compatible. Here are two examples of cyclohexanone alkylation the high reactivity of the potassium enolate is demonstrated by the efficient tetramethylation with excess potassium hydride and methyl iodide. 

Reductive amination of cyclohexanone using primary and secondary aHphatic amines provides A/-alkylated cyclohexylamines. Dehydration to imine for the primary amines, to endocycHc enamine for the secondary amines is usually performed in situ prior to hydrogenation in batch processing. Alternatively, reduction of the /V-a1ky1ani1ines may be performed, as for /V,/V-dimethy1 cyclohexyl amine from /V, /V- di m e th y1 a n i1 i n e [121 -69-7] (12,13). One-step routes from phenol and the alkylamine (14) have also been practiced. 

Dicyclohexylarnine may be selectively generated by reductive alkylation of cyclohexylamine by cyclohexanone (15). Stated batch reaction conditions are specifically 0.05—2.0% Pd or Pt catalyst, which is reusable, pressures of 400—700 kPa (55—100 psi), and temperatures of 75—100°C to give complete reduction in 4 h. Continuous vapor-phase amination selective to dicyclohexylarnine is claimed for cyclohexanone (16) or mixed cyclohexanone plus cyclohexanol (17) feeds. Conditions are 5—15 s contact time of <1 1 ammonia ketone, - 3 1 hydrogen ketone at 260°C over nickel on kieselguhr. With mixed feed the preferred conditions over a mixed copper chromite plus nickel catalyst are 18-s contact time at 250 °C with ammonia alkyl = 0.6 1 and hydrogen alkyl = 1 1. 

Photolysis of pyridazine IV-oxide and alkylated pyridazine IV-oxides results in deoxygenation. When this is carried out in the presence of aromatic or methylated aromatic solvents or cyclohexane, the corresponding phenols, hydroxymethyl derivatives or cyclohexanol are formed in addition to pyridazines. In the presence of cyclohexene, cyclohexene oxide and cyclohexanone are generated. 

The stereoselective reactions in Scheme 2.10 include one example that is completely stereoselective (entry 3), one that is highly stereoselective (entry 6), and others in which the stereoselectivity is modest to low (entries 1,2,4, 5, and 7). The addition of formic acid to norbomene (entry 3) produces only the exo ester. Reduction of 4-r-butylcyclohexanone (entry 6) is typical of the reduction of unhindered cyclohexanones in that the major diastereomer produced has an equatorial hydroxyl group. Certain other reducing agents, particularly sterically bulky ones, exhibit the opposite stereoselectivity and favor the formation of the diastereomer having an axial hydroxyl groi. The alkylation of 4-t-butylpiperidine with benzyl chloride (entry 7) provides only a slight excess of one diastereomer over the other. 

The conformational energy of an alkyl group at C—3 of cyclohexanone is substantially less than that of an alkyl group in cyclohexane because of reduced... 

Endocyclic cyclohexanone enolates with 2-alkyl groups show a small preference (1 1-5 1) for approach of the electrophile from the direction that permits the chair conformation to be maintained. ... 

In 1954 Stork et al. (i) reported that the alkylation of the pyrrolidine enamine of cyclohexanone (5) with methyl iodide followed by acid hydro-I ysis led to the monoalkylated ketone. It was thus obvious that the enamine (7) derived by the loss of proton from the intermediate methylated iminium cation (6) failed to undergo any further alkylation. 

The presence of 1,3-diaxial interaction between the C-2 alkyl group and the C-4 axial hydrogen atom is reflected in the rate of enamine formation of 2-substituted cyclohexanone. It has been shown by Hunig and Salzwedel (20) that even under forcing conditions, the yield of pyrrolidine and morpholine enamines of 2-methylcyclohexanone does not exceed 58%, whereas the C-2 unsubstituted ketones underwent enamine formation under rather milder conditions in better than 80 % yield. 

In their original communication on the alkylation and acylation of enamines, Stork et al. (3) had reported that the pyrrolidine enamine of cyclohexanone underwent monoacylation with acid chlorides. For example, the acylation with benzoyl chloride led to monobenzoylcyclohexanone. However, Hunig and Lendle (33) found that treatment of the morpholine enamine of cyclopentanone with 2 moles of propionyl chloride followed by acid hydrolysis gave the enol ester (56), which was proposed to have arisen from the intermediate (55). 

Experimental evidence, obtained in protonation (3,6), acylation (1,4), and alkylation (1,4,7-9) reactions, always indicates a concurrence between electrophilic attack on the nitrogen atom and the -carbon atom in the enamine. Concerning the nucleophilic reactivity of the j3-carbon atom in enamines, Opitz and Griesinger (10) observed, in a study of salt formation, the following series of reactivities of the amine and carbonyl components pyrrolidine and hexamethylene imine s> piperidine > morpholine > cthyl-butylamine cyclopentanone s> cycloheptanone cyclooctanone > cyclohexanone monosubstituted acetaldehyde > disubstituted acetaldehyde. 

With enamines of cyclic ketones direct C alkylation occurs with allyl and propargyl as well as alkyl halides. The reaction is again sensitive to the polarity of the solvent (29). The pyrrolidine enamine of cyclohexanone on reaction with ethyl iodide in dioxane gave 25% of 2-ethylcyclohexanone on hydrolysis, while in chloroform the yield was increased to 32%. 

The enamines derived from cyclic ketones give the normal alkylated products, although there is some evidence that unstable cycloadducts are initially formed (55b). Thus the enamine (28) derived from cyclohexanone and pyrrolidine on reaction with acrylonitrile, acrylate esters, or phenyl vinyl sulfone gave the 2-alkylated cyclohexanones (63) on hydrolysis of the intermediates (31,32,55,56). These additions are sensitive to the polarity of the solvent. Thus (28) in benzene or dioxane gave an 80% yield of the... 

Nitroolefins also offer the possibilities of 1,2 cycloaddition (37,57) or simple alkylation (57-59) products when they are allowed to react with enamines. The reaction of nitroethylene with the morpholine enamine of cyclohexanone led primarily to a cyclobutane adduct in nonpolar solvents and to a simple alkylated product in polar solvents (57). These products are evidently formed from kinetically controlled reactions since they cannot be converted to the other product under the conditions in which the other... 

Methyl vinyl sulfone forms 1,2-cycloaddition adducts with aldehydic enamines, both with and without 3 hydrogens (37). Simple alkylation was reported to take place when phenyl vinyl sulfone was allowed to react with cyclohexanone enamines (58,60), but it has recently been shown that phenyl vinyl sulfone also forms cyclobutane adducts (60a). 

The reaction of methyl propiolate (82) with acyclic enamines produces acyclic dienamines (100), as was the case with dimethyl acetylenedicarboxylate, and the treatment of the pyrrolidine enamines of cycloheptanone, cyclooctanone, cycloundecanone, and cyclododecanone with methyl propiolate results in ring enlargement products (100,101). When the enamines of cyclohexanone are allowed to react with methyl propiolate, rather anomalous products are formed (100). The pyrrolidine enamine of cyclopentanone forms stable 1,2-cycloaddition adduct 83 with methyl propiolate (82). Adduct 83 rearranges to the simple alkylation product 84 upon standing at room temperature, and heating 83 to about 90° causes ring expansion to 85 (97,100). 

A pseudo 1,2 cycloaddition (actually a 1,3 cycloaddition, but may be considered a 1,2 type if a three-membered ring is considered analogous to an alkene) is observed when the pyrrolidine enamine of cyclohexanone is allowed to react with N-carbethoxyaziridine (129) to produce octahydro-indole 130 91). Octahydroindoles and pyrrolidines can also be produced through the intramolecular alkylation of the enamines of certain halo-ketourethanes 176a). 

The reactions of pyrrolidinocyelohexenes with acid have also been Considered from a stereochemical point of view. Deuteration of the 2-methylcyclohexanone enamine gave di-2-deuterio-6-methylcyclohexanone under conditions where ds-4-/-butyI-6-methyIpyrrolidinocycIohexene was not deuterated (2J4). This experiment supported the postulate of Williamson (2JS), which called for the axial attack of an electrophile and axial orientation of the 6 substituent on an aminocyclohexene in the transition state of such enamine reactions. These geometric requirements explain the more difficult alkylation of a cyclohexanone enamine on carbon 2, when it is substituted at the 6 position, as compared with the unsubstituted case. 

The illumination of enamines as general activa ting derivatives of ketones in alkylation reactions also threw light on their special usefulness for controlling alkylations (3), particularly in the formation of monosubstituted cyclohexanones. Thus 2-methylcyclohexanone could be obtained in 80% yield from the pyrrolidine enamine of cyclohexanone, and further alkylation, which required more drastic conditions, gave only 2,6-dimethylcyclo-hexanone (1,237). 

---