Cyclohexanes, preparation

US EPA (Environmental Protection Agency) (1986) Health and Environmental Effects Profile for Hexachloro-cyclohexanes. Prepared by the Office of Health and Environmental Assessment, Environmental Criteria and Assessment Office, Cincinnati, OH, for the Office of Solid Waste and Emergency Response, Washington, DC. 

This is a crystalline solid which exists in both red and yellow forms of identical chemical properties and which probably differ only in state of subdivision. The complex is soluble in chloroform or methylene chloride to the extent of about 20 g.l 1. at 25°. The solubility in benzene or toluene is about 2g./l. at 25°, but is much lower in acetic acid, acetone, or lower aliphatic alcohols. The complex is virtually insoluble in n-hexane or cyclohexane. Preparation by interaction of ethanolic solutions of RhCl3 3 H20 and a sixfold molar excess of triphenylphosphine, acting as both complexing and reducing agent and as suppressor of dissociation.1,8... 

Amine curatives useful in imparting chemical resistance to epoxy adhesives have been described in a recent patent issued to Takeda Chemical Industries, Ltd. These curatives are aldimized or ketimized derivatives of l,3,5-tris(aminomethyl)benezene or cyclohexane, prepared by condensation of the polyamine with an appropriate aldehyde or ketone (Eq. 10) and are... 

N.m.r. and i.r. spectroscopy were used to identify" cis- and trans-4-t-butyl-[ 1 H]cyclohexane prepared from 4-t-butylcyclohexanone via the methanesulphonate of the intermediate [l- H]cyclohexanol compound. The resonances of the cis-and trans-isomers are located 5.98 and 5.42 p.p.m., respectively, above that of CDCI3. 

C, b.p. 81"C. Manufactured by the reduction of benzene with hydrogen in the presence of a nickel catalyst and recovered from natural gase.s. It is inflammable. Used as an intermediate in the preparation of nylon [6] and [66] via caprolactam and as a solvent for oils, fats and waxes, and also as a paint remover. For stereochemistry of cyclohexane see conformation. U.S. production 1980 1 megatonne. 

This reaction applies to many i,2 diketones, and is termed the Benzilic Acid Rearrangement. It provides a ready method for the preparation of disubstituted a4iydroxy-carboxylic acids. When applied to a cyclic 1,2-diketone, the ring system is necessarily reduced by one carbon atom for example, cyclohexan-i,2 ... 

Let s begin with a simple example Suppose you wanted to prepare cyclohexane given cyclohexanol as the starting material We haven t encountered any reactions so far that permit us to carry out this conversion m a single step... 

Reasoning backward however we know that we can prepare cyclohexane by hydro genation of cyclohexene We 11 therefore use this reaction as the last step m our pro posed synthesis... 

Recognizing that cyclohexene may be prepared by dehydration of cyclohexanol a prac tical synthesis of cyclohexane from cyclohexanol becomes apparent... 

Anionic polymerization of vinyl monomers can be effected with a variety of organometaUic compounds alkyllithium compounds are the most useful class (1,33—35). A variety of simple alkyllithium compounds are available commercially. Most simple alkyllithium compounds are soluble in hydrocarbon solvents such as hexane and cyclohexane and they can be prepared by reaction of the corresponding alkyl chlorides with lithium metal. Methyllithium [917-54-4] and phenyllithium [591-51-5] are available in diethyl ether and cyclohexane—ether solutions, respectively, because they are not soluble in hydrocarbon solvents vinyllithium [917-57-7] and allyllithium [3052-45-7] are also insoluble in hydrocarbon solutions and can only be prepared in ether solutions (38,39). Hydrocarbon-soluble alkyllithium initiators are used directiy to initiate polymerization of styrene and diene monomers quantitatively one unique aspect of hthium-based initiators in hydrocarbon solution is that elastomeric polydienes with high 1,4-microstmcture are obtained (1,24,33—37). Certain alkyllithium compounds can be purified by recrystallization (ethyllithium), sublimation (ethyllithium, /-butyUithium [594-19-4] isopropyllithium [2417-93-8] or distillation (j -butyUithium) (40,41). Unfortunately, / -butyUithium is noncrystaUine and too high boiling to be purified by distiUation (38). Since methyllithium and phenyllithium are crystalline soUds which are insoluble in hydrocarbon solution, they can be precipitated into these solutions and then redissolved in appropriate polar solvents (42,43). OrganometaUic compounds of other alkaU metals are insoluble in hydrocarbon solution and possess negligible vapor pressures as expected for salt-like compounds. 

The chemical properties of cycHc ketones also vary with ring size. Lower members (addition reactions, than corresponding acycHc ketones. The Cg—C 2 ketones are unreactive, reflecting the strain and high enol content of medium-sized ring systems. Lactones are prepared from cycHc ketones by the Bayer-ViUiger oxidation reaction with peracids. S-Caprolactone is manufactured from cyclohexane by this process ... 

C. It can be obtained from its hahde-free solutions in cyclohexane and ethylether by vacuum distUlation to remove the ether. The usual preparative method is by reaction of chloro- or bromobenzene and lithium metal in ethyl ether or in a mixture of ethyl ether and cyclohexane. 

Enzymatic hydrolysis is also used for the preparation of L-amino acids. Racemic D- and L-amino acids and their acyl-derivatives obtained chemically can be resolved enzymatically to yield their natural L-forms. Aminoacylases such as that from Pispergillus OTj e specifically hydrolyze L-enantiomers of acyl-DL-amino acids. The resulting L-amino acid can be separated readily from the unchanged acyl-D form which is racemized and subjected to further hydrolysis. Several L-amino acids, eg, methionine [63-68-3], phenylalanine [63-91-2], tryptophan [73-22-3], and valine [72-18-4] have been manufactured by this process in Japan and production costs have been reduced by 40% through the appHcation of immobilized cell technology (75). Cyclohexane chloride, which is a by-product in nylon manufacture, is chemically converted to DL-amino-S-caprolactam [105-60-2] (23) which is resolved and/or racemized to (24)... 

Organoperoxysulfonic acids and their salts have been prepared by the reaction of arenesulfonyl chlorides with calcium, silver, or sodium peroxide treatment of metal salts of organosulfonic acids with hydrogen peroxide hydrolysis of di(organosulfonyl) peroxides, RS(0)2—OO—S(02)R, with hydrogen peroxide and sulfoxidation of saturated, non aromatic hydrocarbons, eg, cyclohexane (44,181). 

Higher alkoxides, such as tetra(2-ethylhexyl) titanate, TYZOR TOT [1070-10-6], can be prepared by alcohol interchange (transestenfication) in a solvent, such as benzene or cyclohexane, to form a volatile a2eotrope with the displaced alcohol, or by a solvent-free process involving vacuum removal of the more volatile displaced alcohol. The affinity of an alcohol for titanium decreases in the order primary > secondary > tertiary, and... 

The stmcture of vitamin A [11103-57-4] and some of the important derivatives are shown in Figure 1. The parent stmcture is aH-Zra/ j -retinol [68-26-8] and its lUPAC name is (all-E)-3,7-dimethyl-9-(2,6,6-trimethyl-l-cyclohexen-l-yl)-2,4,6,8-nonatetraen-l-ol (1). The numbering system for vitamin A derivatives parallels the system used for the carotenoids. In older Hterature, vitamin A compounds are named as derivatives of trimethyl cyclohexene and the side chain is named as a substituent. For retinoic acid derivatives, the carboxyl group is denoted as C-1 and the trimethyl cyclohexane ring as a substituent on C-9. The stmctures of vitamin A and -carotene were elucidated by Karrer in 1930 and several derivatives of the vitamin were prepared by this group (5,6). In 1935, Wald isolated a substance found in the visual pigments of the eye and was able to show that this material was identical with Karrer s retinaldehyde [116-31-4] (5) (7). 

AH commercial processes for the manufacture of caprolactam ate based on either toluene or benzene, each of which occurs in refinery BTX-extract streams (see BTX processing). Alkylation of benzene with propylene yields cumene (qv), which is a source of phenol and acetone ca 10% of U.S. phenol is converted to caprolactam. Purified benzene can be hydrogenated over platinum catalyst to cyclohexane nearly aH of the latter is used in the manufacture of nylon-6 and nylon-6,6 chemical intermediates. A block diagram of the five main process routes to caprolactam from basic taw materials, eg, hydrogen (which is usuaHy prepared from natural gas) and sulfur, is given in Eigute 2. 

Tetracyanoquinodimethane [1518-16-7] (5), 2,2 -(2,5-cyclohexadiene-l,4-diyhdene)bispropanedinitrile (TCNQ), is prepared by condensation of 1,4-cyclohexanedione with malononittile to give l,4-bis(dicyanomethylene)cyclohexane [1518-15-6] which is oxidized with bromine (31). 

Chiral Alcohols and Lactones. HLAT) has been widely used for stereoselective oxidations of a variety of prochiral diols to lactones on a preparative scale. In most cases pro-(3) hydroxyl is oxidized irrespective of the substituents. The method is apphcable among others to tit-1,2-bis(hydroxymethyl) derivatives of cyclopropane, cyclobutane, cyclohexane, and cyclohexene. Resulting y-lactones are isolated in 68—90% yields and of 100% (164,165). 

The fusion of a benzene ring to pyrazine results in a considerable increase in the resistance to reduction and it is usually difficult to reduce quinoxalines beyond the tetrahydroquinoxa-line state (91). Two possible dihydroquinoxalines, viz. the 1,2- (92) and the 1,4- (93), are known, and 1,4-dihydroquinoxaline appears to be appreciably more stable than 1,4-dihydropyrazine (63JOC2488). Electrochemical reduction appears to follow a course anzdogous to the reduction of pyrazine, giving the 1,4-dihydro derivative which isomerizes to the 1,2- or 3,4-dihydroquinoxaline before subsequent reduction to 1,2,3,4-tetra-hydroquinoxaline (91). Quinoxaline itself is reduced directly to (91) with LiAlH4 and direct synthesis of (91) is also possible. Tetrahydroquinoxalines in which the benzenoid ring is reduced are well known but these are usually prepared from cyclohexane derivatives (Scheme 30). 

The more traditional methods of phenazine synthesis falling into the type A synthesis are altogether less satisfactory than the application of the Beirut reaction. Traditionally, Ris prepared phenazine in low yield by heating o-phenylenediamine and catechol in a sealed tube at 200 °C (1886CB2206) however, the method appears to be unsatisfactory at best and gives, in addition to phenazine, 5,10-dihydrophenazine in varying amounts (Scheme 53). Several variants of this procedure exist o-benzoquinone has been used in condensation with 0-phenylenediamine and yields as high as 35% have been reported, and 1,2,3,4-tetrahydrophenazine has been prepared by condensation of o-phenylenediamine with cyclohexane- 1,2-dione. 

Heating or irradiating alkenes in the presence of sulfur gives relatively low yields of thiiranes. For example, a mixture of sulfur and norbornadiene in pyridine-DMF-NHa at 110 °C gave a 19% yield of the monoepisulfide of norbornadiene as compared with a 78% yield by the method of Scheme 120 (79JCS(Pi)228). Often 1,2,3-trithiolanes are formed instead of thiiranes. The sesquiterpene episulfides in the essential oil of hops were prepared conveniently by irradiation of the terpene and sulfur in cyclohexane (Scheme 135) (80JCS(Pl)3li). Phenyl, methyl or allyl isothiocyanate may be used as a source of sulfur atoms instead of elemental sulfur. 

Terephthalic acid has been obtained from a great many /)-disubstituted derivatives of benzene or cyclohexane by oxidation with permanganate, chromic acid, or nitric acid. The following routes appear to have preparative value from />-toluic acid, />-methylacetophenone,2 or dihydro-/)-tolualdehyde by oxidation with permanganate from f>-cymene by oxidation with sodium dichromate and sulfuric acid from />-dibromobenzene or from /i-chloro- or -bromobenzoic acid by heating at 250° with potassium and cuprous cyanides and from />-dibromo-benzene, butyllithium, and carbon dioxide. ... 

---