1,3-Cyclohexadiene acidity

Diacetoxylation of various conjugated dienes including cyclic dienes has been extensively studied. 1,3-Cyclohexadiene was converted into a mixture of isomeric l,4-diacetoxy-2-cyclohexenes of unknown stereochemistry[303]. The stereoselective Pd-catalyzed 1,4-diacetoxylation of dienes is carried out in AcOH in the presence of LiOAc and /or LiCI and beiizoquinone[304.305]. In the presence of acetate ion and in the absence of chloride ion, /rau.v-diacetox-ylation occurs, whereas addition of a catalytic amount of LiCl changes the stereochemistry to cis addition. The coordination of a chloride ion to Pd makes the cis migration of the acetate from Pd impossible. From 1,3-cyclohexadiene, trans- and ci j-l,4-diacetoxy-2-cyclohexenes (346 and 347) can be prepared stereoselectively. For the 6-substituted 1,3-cycloheptadiene 348, a high diaster-eoselectivity is observed. The stereoselective cij-diacetoxylation of 5-carbo-methoxy-1,3-cyclohexadiene (349) has been applied to the synthesis of dl-shikimic acid (350). 

The wM-diacetate 363 can be transformed into either enantiomer of the 4-substituted 2-cyclohexen-l-ol 364 via the enzymatic hydrolysis. By changing the relative reactivity of the allylic leaving groups (acetate and the more reactive carbonate), either enantiomer of 4-substituted cyclohexenyl acetate is accessible by choice. Then the enantioselective synthesis of (7 )- and (S)-5-substituted 1,3-cyclohexadienes 365 and 367 can be achieved. The Pd(II)-cat-alyzed acetoxylactonization of the diene acids affords the lactones 366 and 368 of different stereochemistry[310]. The tropane alkaloid skeletons 370 and 371 have been constructed based on this chemoselective Pd-catalyzed reactions of 6-benzyloxy-l,3-cycloheptadiene (369)[311]. 

From West Indian lime oil, a trace low Foiling constituent, 1-methyl-1,3-(or 1,5 /74< 5 -3 7- -cyclohexadiene has been characterized (27). This compound, which possesses an intense and characteristic lime aroma, was later confirmed to be the 1,3-isomer [1489-56-1] (11). This compound can easily be made in a biomimetic way through the reaction of citral [5392-40-5] (3,7-dimethyl-2,6-octadienal) with citric acid (28,29). 

BenZotrichloride Method. The central carbon atom of the dye is supphed by the trichloromethyl group from iJ-chlorobenzotrichloride. Both symmetrical and unsymmetrical triphenyhnethane dyes suitable for acryhc fibers are prepared by this method. 4-Chlorobenzotrichloride is condensed with excess chlorobenzene in the presence of a Lewis acid such as aluminium chloride to produce the intermediate aluminium chloride complex of 4,4, 4"-trichlorotriphenylmethyl chloride (18). Stepwise nucleophihc substitution of the chlorine atoms of this intermediate is achieved by successive reactions with different arylamines to give both symmetrical (51) and unsymmetrical dyes (52), eg, N-(2-chlorophenyl)-4-[(4-chlorophenyl) [4-[(3-methylphenyl)imino]-2,5-cyclohexadien-l-yhdene]methyl]benzenaminemonohydrochloride [85356-86-1J (19) from. w-toluidine and o-chloroaniline. 

Tribromophenol can be further brominated in buffered acetic acid to give 2,4,4,6-tetrabromo-2,5-cyclohexadien-l-one [20244-61-5] a useful hrominating agent (26). 

Tetracyanobenzoquinone [4032-03-5] 3,6-dioxo-l,4-cyclohexadiene-l,2,4,5-tetracarbonitrile, is a remarkably strong oxidizing agent for a quinone it abstracts hydrogen from tetralin or ethanol even at room temperature (50). It is a stronger TT-acid than TCNE because it forms more deeply colored TT-complexes with aromatic hydrocarbons. 

Iron pentacarbonyl and l-methoxy-l,4-cyclohexadiene react as shown by Birch and oo-workera, but in dibutyl ether this solvent has been found superior. The tricarbonyl(methoxy-l,3-cyclohexadiene)iron isomers undergo hydride abstraction with triphenylmethyl tetrafluoro-borate to form the dienyl salt mixture of which the 1-methoxy isomer is hydrolyzed by water to the cyclohexadienone complex. The 2-methoxy isomer can be recovered by precipitation as the hexafluoro-phosphate salt. By this method the 3-methyl-substituted dienone complex has also been prepared from l-methoxy-3-methylbenzene. The use of the conjugated 1-methoxy-1,3-cyclohexadiene in Part B led to no increase in yield or rate and resulted chiefly in another product of higher molecular weight. An alternative procedure for the dienone is to react tricarbonyl(l,4-dimethoxycyclohexadiene)iron with sulfuric acid. ... 

To overcome these problems with the first generation Brmsted acid-assisted chiral Lewis acid 7, Yamamoto and coworkers developed in 1996 a second-generation catalyst 8 containing the 3,5-bis-(trifluoromethyl)phenylboronic acid moiety [10b,d] (Scheme 1.15, 1.16, Table 1.4, 1.5). The catalyst was prepared from a chiral triol containing a chiral binaphthol moiety and 3,5-bis-(trifluoromethyl)phenylboronic acid, with removal of water. This is a practical Diels-Alder catalyst, effective in catalyzing the reaction not only of a-substituted a,/ -unsaturated aldehydes, but also of a-unsubstituted a,/ -unsaturated aldehydes. In each reaction, the adducts were formed in high yields and with excellent enantioselectivity. It also promotes the reaction with less reactive dienophiles such as crotonaldehyde. Less reactive dienes such as isoprene and cyclohexadiene can, moreover, also be successfully employed in reactions with bromoacrolein, methacrolein, and acrolein dienophiles. The chiral ligand was readily recovered (>90%). 

Chemical Name 7-[ (Amino-1,4-cyclohexadien-1-yl-acetyl)amino] -3-methoxy-B-oxo-5-thia-1 -azabicyclo [4.2.0] -oct-2-ene-2-carboxylic acid... 

Chemical Name 6-[D-2-amino-2-(1,4-cyclohexadien-1-vl)acetamido] -3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0] heptane-2-carboxylic acid... 

Chemical Name 2,5-dihydroxybenzenesulfonic acid compound vyith N-ethylethanamine Common Name Diethylammonium cyclohexadien-4-oM-one-4-sulfonate Structural Formula ... 

The formed methylcyclohexane carbocation eliminates a proton, yielding 3-methylcyclohexene. 3-Methylcyclohexene can either dehydrogenate over the platinum surface or form a new carbocation by losing H over the acid catalyst surface. This step is fast, because an allylic car-bonium ion is formed. Losing a proton on a Lewis base site produces methyl cyclohexadiene. This sequence of carbocation formation, followed by loss of a proton, continues till the final formation of toluene. 

The next step is the ahstraction of a hydride ion hy a Lewis acid site from the zeolite surface to form the more stable allylic carhocation. This is again followed hy a proton elimination to form a cyclohexadiene intermediate. The same sequence is followed until the ring is completely aromatized. 

Cyclohexadiene has been prepared by dehydration of cyclohexen-3-ol,3 by pyrolysis at 540° of the diacetate of cyclohexane-1,2-diol,4 by dehydrobromination with quinoline of 3-hromocyclohexene,6 by treating the ethyl ether of cyclohexen-3-ol with potassium bisulfatc,6 7 by heating cyclohexene oxide with phthalic anhydride,8 by treating cyclohexane-1,2-diol with concentrated sulfuric acid,9 by treatment of 1,2-dibromocyclo-hexane with tributylamine,10 with sodium hydroxide in ethylene glycol,10 and with quinoline,6 and by treatment of 3,6-dibromo-cyclohexene with sodium.6... 

In a 250-ml., three-necked flask fitted with a mechanical stirrer, a thermometer, and a 25-ml., graduated, pressure-equalizing dropping funnel are placed 7.60 g. (0.050 mole) of phenoxyacetic acid [Acetic acid, phenoxy-] (Note 1), 5.40 g. (0.050 mole) of 1,4-benzoquinone [2,5-Cyclohexadiene-l,4-dioneJ (Note 2), 1 g. (0.006 mole) of silver nitrate [Nitric acid silver(l +) salt] (Note 3), and 125 ml. of water (Note 4). The mixture is then stirred and heated to 60-65° by means of a heating mantle until dissolution is complete. The resulting solution is stirred... 

Benzoquinone Fivalic [Propanoic acid, 2,2-dimethyl-] 2-tert-Butyl [2,5-Cyclohexadiene-1,4-dione, 2- (1,1 -di methy lethy 1) - ] 67" 2... 

A. 2,i,l,()-Tetrabromo-2,5-cyclohexadien-l-one. A mixture of 66.2 g. (0.2 mole) of 2,4,6-tribromophenol (Note 1), 27.2 g. (0.2 mole) of sodium acetate trihydrate, and 400 ml. of glacial acetic acid is placed in a 1-1. Erlenmeyer flask and warmed until a clear solution is obtained. The temperature of the solution is approximately 70°. The solution is magnetically stirred and cooled to room temperature to produce a finely divided suspension of the phenol. A solution of 32 g. (0.2 mole) of bromine in 200 ml. of glacial acetic acid is added dropwise over 1 hour (Note 2). The resulting mixture is kept at room temperature for 30 minutes and is then poured onto 2 kg. of crushed ice. The yellow solid which separates is removed by suction filtration after the ice has melted, and the damp crystals are dissolved in the minimum quantity of warm chloroform (Note 3). The upper aqueous layer is removed by means of a pipet fitted with a suction bulb. The dienone crystallizes from the... 

Good yields and high diastereoselectivities were obtained by using zeolites in combination with Lewis-acid catalyst [21]. Table 4.7 illustrates some examples of Diels-Alder reactions of cyclopentadiene, cyclohexadiene and furan with methyl acrylate. Na-Y and Ce-Y zeolites gave excellent results for the cycloadditions of carbocyclic dienes, and combining these zeolites with anhydrous ZnBr2 further enhanced the endo diastereoselectivity of the reaction. An exception is the cycloaddition of furan that occurred considerably faster and with better yield, in comparison with the classic procedure [22], when performed in the presence of sole zeolites. 

Nafion-H (144), a perfluorinated resin-sulfonic acid, is an efficient Bronsted-acid catalyst which has two advantages it requires only catalytic amounts since it forms reversible complexes, and it avoids the destruction and separation of the catalyst upon completion of the reaction [94], Thus in the presence of Nafion-H, 1,4-benzoquinone and isoprene give the Diels-Alder adduct in 80% yield at 25 °C, and 1,3-cyclohexadiene reacts with acrolein at 25 °C affording 88 % of cycloadduct after 40 h, while the uncatalyzed reactions give very low yields after boiling for 1 h or at 100 °C for 3.5 h respectively [95], Other examples are given in Table 4.24. In the acid-catalyzed reactions that use highly reactive dienes such as isoprene and 2,3-dimethylbutadiene, polymerization of alkenes usually occurs with Nafion-H, no polymerization was observed. 

The cationic pathway allows the conversion of carboxylic acids into ethers, acetals or amides. From a-aminoacids versatile chiral building blocks are accessible. The eliminative decarboxylation of vicinal diacids or P-silyl carboxylic acids, combined with cycloaddition reactions, allows the efficient construction of cyclobutenes or cyclohexadienes. The induction of cationic rearrangements or fragmentations is a potent way to specifically substituted cyclopentanoids and ring extensions by one-or four carbons. In view of these favorable qualities of Kolbe electrolysis, numerous useful applications of this old reaction can be expected in the future. 

The reaction of 1,4-benzenediols with an equimolar amount of BTMA Br3 in dichloromethane in the presence of aq. sodium acetate at room temperature gave 2,5-cyclohexadiene-l,4-diones in good yields. On the other hand, the reaction of 1,4-benzenediols with a large excess of the agent in aq. acetic acid at 40-60°C gave polybromo-substituted products (Fig. 25) (ref. 33). 

CN [6 -[6a,73( )]]-7-[ amino-l,4-cyclohexadien l-ylacetyl)amino]-3-methyI-8-oxo-5-th a-l-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid... 

CN -(2,4,5-trimethyl-3,6-dioxo-l,4-cyclohexadien-l-yl)benzeneheptanoic acid (+)-/ -enantiomer... 

---