Cycloadditions of Azomethine Ylides

Another example of a microwave-assisted 1,3-dipolar cycloaddition using azomethine ylides and a dipolarophile was the intramolecular reaction reported for the synthesis of hexahydrochromeno[4,3-fo]pyrrolidine 105 [70]. It was the first example of a solvent-free microwave-assisted intramoleciflar 1,3-dipolar cycloaddition of azomethine ylides, obtained from aromatic aldehyde 102 and IM-substituted glycinate 103 (Scheme 36). The dipole was generated in situ (independently from the presence of a base like TEA) and reacted directly with the dipolarophile present within the same molecifle. The intramolecu-... 

Scheme 10.10 1,3-Dipolar cycloadditions of azomethine ylides with maleimides in the...

Dipolar addition to nitroalkenes provides a useful strategy for synthesis of various heterocycles. The [3+2] reaction of azomethine ylides and alkenes is one of the most useful methods for the preparation of pyrolines. Stereocontrolled synthesis of highly substituted proline esters via [3+2] cycloaddition between IV-methylated azomethine ylides and nitroalkenes has been reported.147 The stereochemistry of 1,3-dipolar cycloaddition of azomethine ylides derived from aromatic aldehydes and L-proline alkyl esters with various nitroalkenes has been reported. Cyclic and acyclic nitroalkenes add to the anti form of the ylide in a highly regioselective manner to give pyrrolizidine derivatives.148... 

In addition to cydocondensation reactions of the Paal-Knorr type, cycloaddition processes play a prominent role in the construction of pyrrole rings. Thus, 1,3-dipo-lar cycloadditions of azomethine ylides with alkene dipolarophiles are very important in the preparation of pyrroles. The group of de la Hoz has studied the micro-wave-induced thermal isomerization of imines, derived from a-aminoesters, to azomethine ylides (Scheme 6.185) [346]. In the presence of equimolar amounts of /i-nitrostyrenes, three isomeric pyrrolidines (nitroproline esters) were obtained under solvent-free conditions in 81-86% yield within 10-15 min at 110-120 °C through a [3+2] cycloaddition process. Interestingly, using classical heating in an oil bath (toluene reflux, 24 h), only two of the three isomers were observed. 

A general method for the functionalization of C60 (4) is the 1,3-dipolar cycloaddition of azomethine ylides. This process was first described by Prato [94] and leads to fulleropyrrolidines. Several fulleropyrrolidines (143a-c) have been prepared under microwave irradiation by Langa et al. [72]. These authors observed that microwave irradiation again competes favorably with thermal heating and, in this way, 143 a was... 

Pyrrolidines are attainable by [3 + 2] cycloaddition of azomethine ylides and olefins one such reaction is exemplified by a total synthesis of a-allokainic acid (Scheme 36) (182). 

Other approaches including 1,3-dipolar cycloadditions of azomethine ylides or nitroxides to alkene or alkyne dipolarophiles have been applied to the synthesis of these ring systems. 

A series of analogous py rrolo[ 2,1 -c [ 1,4]oxazine-8-carboxy latcs 188 and 189 (Scheme 28) were obtained by cycloaddition of azomethine ylide 187 with dipolarophiles. The ylide was formed by /(-toluene sulfonic acid-mediated reaction of the benzotriazolyl chiral morpholinone 186, which can be considered as a stable crystalline azomethine ylide precursor <2001SL1841>. This procedure was applied also to morpholinone 190 that generated ylide 191 by reaction with... 

Da Ros T, Prato M, Novello F, Maggini M, Banfi E (1996) Easy access to water soluble fullerene derivatives via 1,3-dipolar cycloadditions of azomethine ylides to C60. J. Org. Chem. 61 9070-9072. 

Dipolar cycloaddition of azomethine ylides, generated by the condensation of an a-amino acid and an aldehyde, is an efficient method for covalent sidewall functionalisation and has been successfully used to solubilise CNTs in most organic solvents (Tasis et al., 2003 Holzinger et al., 2003). This particular technique has also been utilised to obtain the first example of a bioactive peptide covalently linked to CNTs by the prospect for the potential applications in immunology (Bianco and Prato, 2003 Pantarotto et al., 2003a, b Bianco et al., 2005b). 

Attaching a Ceo cluster to an [Ru(bpy)3] + core has been achieved by 1,3-dipolar cycloaddition of azomethine ylides to the fullerene. The electrochemistry of the complex is complicated a one-electron reversible oxidation of the Ru center, five one-electron reversible reductions associated with the Ceo cage, and five more reversible reductions centered on the bpy ligands. The photophysical properties of the complex have been discussed. ... 

The 1,3-dipolar cycloaddition of azomethine yUdes with olefins gives rise to pyrrolidines which represent structural elements of organocatalysts, natural products, and drug candidates. Asymmetric metal-catalyzed variants attracted considerable attention over the last few years [64], Recently, Vicario et al. reported an organo-catalytic [3 -i- 2] cycloaddition of azomethine ylides and a,p-unsaturated aldehydes mediated by a chiral secondary amine [65]. 

In a similar study to that outlined by Grigg, Kanemasa et al. (68) has demonstrated the intramolecular cycloaddition of azomethine ylides derived from either amino acids or esters. Treatment of the amino methyl ester 302 with... 

Planar chiral arene Cr(CO)3 complexes have been shown to undergo highly diastereoselective cycloadditions and Kiindig has extended this protocol to the [3+2] cycloadditions of azomethine ylides (96). Enantiopure ortho- substituted p -benzaldehyde complex 337 underwent condensation with an ot-amino ester to afford imine 338 in the presence of EtaN. Subsequent treatment with methyl acrylate at ambient temperamre in the presence of LiBr and EtaN delivered cycloadduct 339, with excellent stereoinduction and high material yield. Photoinduced oxidative decomplexation in air furnished the final arylpyrrolidines (Scheme 3.114). 

Only a few examples of the [3 + 2] cycloaddition of thiocarbonyl ylides with C=N compounds have been reported so far. By comparison with aldehydes, imines are poor dipolarophiles. For example, Al-benzylidene methylamine and adamanta-nethione (5)-methylide (52) produce 1,3-thiazolidine (129) in only 13% yield (163). An alternative and efficient approach to 1,3-thiazohdines involves the [3 + 2] cycloaddition of azomethine ylides with thiocarbonyl compounds [cf. (169)]. 

The stereochemistry of 1,3-dipolar cycloadditions of azomethine ylides with alkenes is more complex. In this reaction, up to four new chiral centers can be formed and up to eight different diastereomers may be obtained (Scheme 12.4). There are three different types of diastereoselectivity to be considered, of which the two are connected. First, the relative geometry of the terminal substituents of the azomethine ylide determine whether the products have 2,5-cis or 2,5-trans conformation. Most frequently the azomethine ylide exists in one preferred configuration or it shifts between two different forms. The addition process can proceed in either an endo or an exo fashion, but the possible ( ,Z) interconversion of the azomethine ylide confuses these terms to some extent. The endo-isomers obtained from the ( , )-azomethine ylide are identical to the exo-isomers obtained from the (Z,Z)-isomer. Finally, the azomethine ylide can add to either face of the alkene, which is described as diastereofacial selectivity if one or both of the substrates are chiral or as enantioselectivity if the substrates are achiral. 

Grigg and co-workers (383) found that chiral cobalt and manganese complexes are capable of inducing enantioselectivity in 1,3-dipolar cycloadditions of azomethine ylides derived from arylidene imines of glycine (Scheme 12.91). This work was published in 1991 and is the first example of a metal-catalyzed asymmetric 1,3-dipolar cycloaddition. The reaction of the azomethine yhde 284a with methyl acrylate 285 required a stoichiometric amount of cobalt and 2 equiv of the chiral ephedrine ligand. Up to 96% ee was obtained for the 1,3-dipolar cycloaddition product 286a. 

Supercritical carbon dioxide with a minute co-solvent addition is an effective medium for the 1,3-dipolar cycloaddition of azomethine ylides with DMAD to produce substituted pyrroles.67 The 1,3-dipolar cycloaddition of nitrile ylides [e.g. benzonitrile (4-nitrobenzylide) and 4-nitrobenzonitrile(benzylide)] with acrylamides provided a synthesis of 3,4-dihydro-2//-pyrroles with moderate to good yields.68 The Pt(II)-or Au(III)-catalysed 3 + 2-cycloaddition of the transition metal-containing azomethine ylide (63) with electron-rich alkenes provided a carbene complex (64), which yields tricyclic indoles (65) having a substituent at 3-position (Scheme 17).69 The 1,3-dipolar cycloadditions of azomethine ylides with aryl vinyl sulfones are catalysed by Cu(MeCN)4C104-Taniaphos with nearly complete exo- selectivity and enantioselec-tivities up to 85% ee.10 The 3 + 2-cycloaddition of benzol/>]thiophene 1,1-dioxide... 

Fluorous aminoesters have also been used in DOS of three unique triaza tricyclic and tetracyclic ring systems (Scheme 22) [44], Bicyclic pyrrolidines 12 generated from one-pot, three-component 1,3-dipolar cycloaddition of azomethine ylides were further converted to hydantoin-, piperazinedione-, and benzodiazepine-fused compounds 31-33, respectively. Each of these three heterocyclic scaffolds has four stereocenters on the central pyrrolidine ring and up to four points of diversity (R1 to R4). The structure of compound... 

Besides the 1,3-dipolar cycloaddition of azomethine ylides to C60, the Bingel cycloprop anation reaction is widely used for regioselective functionalization of fullerenes. In principle, this versatile modification involves the generation of carbon nucleophiles from a-halo esters and their subsequent addition to C60 [19]. The addition takes place exclusively on double bonds between two six-membered rings of the fullerene skeleton, yielding methanofullerenes. As shown in Scheme 2, addition of diethylbromomalonate to C60, in the presence of an auxiliary base... 

The formation and intramolecular dipolar cycloaddition of azomethine ylides formed by carbenoid reaction with C=N bonds has recently been studied by the authors group.84 Treatment of 2-(diazoace-tyl)benzaldehyde O-methyl oxime (176) with rhodium(II) octanoate in the presence of dimethyl acetylenedicarboxylate or N-phenylmaleimide produced cycloadducts 178 and 179, respectively. The cycloaddition was also carried out using p-quinone as the dipolarophile. The major product isolated corresponded to cycloadduct 180. The subsequent reaction of this material with excess acetic anhydride in pyridine afforded diacetate 181 in 67% overall yield from 176. The latter compound incorporates the basic dibenzofa, d -cyclohepten-5,10-imine skeleton found in MK-801,85 which is a selective ligand for brain cyclidine (PCP) receptors that has attracted considerable attention as a potent anticonvulsive and neuro-protective agent.86,87... 

The [3+2] cycloadditions are the most prolific of all the silver-catalyzed cycloadditions. The unique affinity of silver for imines has facilitated the development of highly efficient and enantioselective cycloadditions of azomethine ylides to alkenes. Judicious choice of reaction conditions is crucial in achieving high yields for different substitution patterns. 

Discovery and Development of the Silver-Catalyzed [3+2] Cycloaddition of Azomethine Ylides... 

---