Pyridine cycloaddition reactions

The current paradigm for B syntheses came from the first report in 1957 of a synthesis of pyridines by cycloaddition reactions of oxazoles (36) (Fig. 5). This was adapted for production of pyridoxine shordy thereafter. Intensive research by Ajinomoto, BASF, Daiichi, Merck, Roche, Takeda, and other companies has resulted in numerous pubHcations and patents describing variations. These routes are convergent, shorter, and of reasonably high throughput. 

Pyridazine carboxylates and dicarboxylates undergo cycloaddition reactions with unsaturated compounds with inverse electron demand to afford substituted pyridines and benzenes respectively (Scheme 45). 

The other main source of various pyridopyridazines from pyridines are the [4 + 2] cycloaddition reactions, already mentioned (Section 2.15.8.3), between vinylpyridines and azodicarboxylic esters (79T2027, 79KGS639) or triazolidinediones e.g. 78KGS651). 2-Vinyl-pyridines gave reduced pyrido[3,2-c]pyridazines (370), 4-vinylpyridines gave [3,4-c] analogues, whilst 2-methyl-5-vinylpyridine furnishes a mixture of the [2,3-c] and [4,3-c] compounds. Yields are low, however, and these remain curiosities for practical synthetic purposes. 

Pyrrolo[3,4-d]pyridazinium salts, 2,3-dimethyl-synthesis, 4, 291 Pyrrolo[ 1,2-6]pyridazinones oxidation, 4, 298 Pyrrolo[2,3-6]pyridine, 1-acetyl-cycloaddition reactions, 4, 509 Pyrrolo[2,3-6]pyridine, 3-bromo-nitration, 4, 505... 

Alternative cycloaddition reactions have been reported that generate the pyridine... 

Besides nucleophile-induced transformations the Hetero Diels-Alder (HDA) cycloaddition reactions are also very suitable ways to perform the pyrimidine-to-pyridine ring transformations. They can occur either by a reaction of an electron-poor pyrimidine system with an electron-rich dienophile (inverse HDA reactions) or by reacting an electron-enriched pyrimidine with an electron-poor dienophile (normal HDA reactions) (see Section II.B). 

The hetero Diels-Alder [4+2] cycloaddition (HDA reaction) is a very efficient methodology to perform pyrimidine-to-pyridine transformations. Normal (NHDA) and Inverse (IHDA) cycloaddition reactions, intramolecular as well as intermolecular, are reported, although the IHDA cycloadditions are more frequently observed. The NHDA reactions require an electron-rich heterocycle, which reacts with an electron-poor dienophile, while in the IHDA cycloadditions a n-electron-deficient heterocycle reacts with electron-rich dienophiles, such as 0,0- and 0,S-ketene acetals, S,S-ketene thioacetals, N,N-ketene acetals, enamines, enol ethers, ynamines, etc. 

Whereas in all previously mentioned inverse cycloaddition reactions [h]-fused pyrido annelated systems are formed, some reactions are described which lead to [c]-pyridine annelated bicyclic systems. 5-(Butynylthio)pyrimidines (R = Ph, NHCOCH3) give on heating at 180°C in nitrobenzene 5-R-2,3-dihydrothieno[2,3-c]pyridines (89T803). 5-Propynyloxymethylpyrimidines also readily undergo cycloaddition into l,3-dihydrofuro[3,4-c]pyridines (89T5151) (Scheme 39). Considerable rate enhancements were observed with quaternized pyrimidinium salts. Whereas... 

In 1997 the application of two different chiral ytterbium catalysts, 55 and 56 for the 1,3-dipolar cycloaddition reaction was reported almost simultaneously by two independent research groups [82, 83], In both works it was observed that the achiral Yb(OTf)3 and Sc(OTf)3 salts catalyze the 1,3-dipolar cycloaddition between nitrones 1 and alkenoyloxazolidinones 19 with endo selectivity. In the first study 20 mol% of the Yb(OTf)2-pyridine-bisoxazoline complex 55 was applied as the catalyst for reactions of a number of derivatives of 1 and 19. The reactions led to endo-selective 1,3-dipolar cycloadditions giving products with enantioselectivities of up to 73% ee (Scheme 6.38) [82]. In the other report Kobayashi et al. described a... 

Kobayashi and co-workers reported similar enantioselectivity switch in the bi-nol-yterrbium(III) triflate complex-catalyzed cycloaddition reactions [69] between N-benzylidenebenzylamine N-oxide and 3-crotonoyl-2-oxazolidinone [70]. The reaction in the presence of MS 4 A showed an exclusively high enantioselectivity of 96% ee, while that in the absence of MS 4 A (-50% ee) or in the presence of pyridine N-oxide (-83% ee) had the opposite enantioselectivity (Scheme 7.24). This chirality switch happens generally for the combination of a wide variety of nitrones and dipolarophiles. 

Trifluoromethyl-l,2,4-triazines and 1,2,4-triazin-5-ones are versatile precursors for azetidines and pyridines by cycloaddition reactions. Enhancement of reactivity was observed through the presence of the trifluor-omethyl group (88CPB3354). 

The first microwave-assisted hetero-Diels-Alder cycloaddition reaction was described by Diaz-Ortiz and co-workers in 1998 between 2-azadiene 198 and the same electron-poor dienophiles as for the preparation of pyrazolo[3,4-b]pyridines 200 (Scheme 72) [127]. These dienes reacted with... 

Shao reported the microwave-assisted hetero-Diels-Alder cycloaddition reaction of a series of acetylenic pyrimidines to introduce a fused lactone/lactam ring, with no degradation of either reactants or products typical for the harsh thermal conditions (150-190°C, 15-144h) [131]. In contrast to the results reported when conventional heating was applied, the Diels-Alder cycloaddition under microwave irradiation gave a high yield of the desired fused lactones or lactams [132]. This reaction provided a practical and general method for the preparation of fused bicyclic pyridines 205 (Scheme 74). 

Cycloaddition reactions catalysed by transition metal complexes are an important tool in the construction of a wide range of carbo- and hetero-cyclic systems, such as benzene, pyridines, triazoles, etc. [7]. In general, these reactions are extremely atom-efficient and involve the formation of several C-C bonds in a single step. Among the innumerable possible catalytic systems for the cycloaddition reaction the NHC-metal complexes have received special attention [7c]. 

Some cycloaddition reactions of 4 are summarized in Scheme 1. This shows that silylene 4 undergoes reactions with nitriles [14], phosphaalkynes [15], silyl azides [16], diazabutadienes [17], 2,2 -bipyridyl and its derivatives [18, 19], a-ketoimines [19], and pyridine-2-aldimines [19]. 

Reversible pyridine dissociation yields the non-Lewis base stabilized imido complex [Cp(NHAr) Ti=NAr] (54). This coordinatively unsaturated species undergoes a [2 + 2] cycloaddition reaction with allene to give an azatitanocyclobutane (55), which is then protonated to the /mamido complex. Elimination of enamine occurs followed by isomerization to the energetically more favorable imine. 

The scope and efficiency of [4+2] cycloaddition reactions used for the synthesis of pyridines continue to improve. Recently, the collection of dienes participating in aza-Diels Alder reactions has expanded to include 3-phosphinyl-l-aza-l,3-butadienes, 3-azatrienes, and l,3-bis(trimethylsiloxy)buta-l, 3-dienes (1,3-bis silyl enol ethers), which form phosphorylated, vinyl-substituted, and 2-(arylsulfonyl)-4-hydroxypyridines, respectively <06T1095 06T7661 06S2551>. In addition, efforts to improve the synthetic efficiency have been notable, as illustrated with the use of microwave technology. As shown below, a synthesis of highly functionalized pyridine 14 from 3-siloxy-l-aza-1,3-butadiene 15 (conveniently prepared from p-keto oxime 16) and electron-deficient acetylenes utilizes microwave irradiation to reduce reaction times and improve yields <06T5454>. 

Moody and coworkers have employed a biomimetic hetero-Diels-Alder-aroma-tization sequence for the construction of the 2,3-dithiazolepyridine core unit in amythiamicin D and related thiopeptide antibiotics (Scheme 6.243 a) [426]. The key cycloaddition reaction between the azadiene and enamine components was carried out by microwave irradiation at 120 °C for 12 h and gave the required 2,3,6-tris(thi-azolyl)pyridine intermediate in a moderate 33% yield. Coupling of the remaining building blocks then completed the first total synthesis of the thiopeptide antibiotic... 

Van der Eycken and coworkers have presented a study describing the microwave-assisted solid-phase Diels-Alder cycloaddition reaction of 2(lH)-pyrazinones with dienophiles [69]. After fragmentation of the resin-bound primary cydoadduct formed by Diels-Alder reaction of the 2(lH)-pyrazinone with an acetylenic dieno-phile, separation of the resulting pyridines from the pyridinone by-products was achieved by applying a traceless linking concept, whereby the pyridinones remained on the solid support with concomitant release of the pyridine products into solution (Scheme 7.58). 

Methods for the synthesis of substituted pyridines remains an intense topic of research. One of the most popular approaches to substituted pyridines remains cycloaddition reactions. While this strategy is not new and many examples are in the current literature <00TL10251>, the state-of-the-art has been expanded. Weinreb and co-workers have reported the regioselective synthesis of pyridines (3) via intramolecular oximino malonate hetero Diels-Alder reactions (1 - 2) <00OL4007>. Similarly, the intramolecular [4 + 2] cycloaddition of... 

These routes are dimerization to furoxans 2 proceeding at ambient and lower temperatures for all nitrile oxides excluding those, in which the fulmido group is sterically shielded, isomerization to isocyanates 3, which proceeds at elevated temperature, is practically the only reaction of sterically stabilized nitrile oxides. Dimerizations to 1,2,4-oxadiazole 4-oxides 4 in the presence of trimethylamine (4) or BF3 (1 BF3 = 2 1) (24) and to 1,4,2,5-dioxadiazines 5 in excess BF3 (1, 24) or in the presence of pyridine (4) are of lesser importance. Strong reactivity of nitrile oxides is based mainly on their ability to add nucleophiles and particularly enter 1,3-dipolar cycloaddition reactions with various dipolarophiles (see Sections 1.3 and 1.4). 

Cycloaddition reactions of nitrile oxides with 5-unsubstituted 1,4-dihydro-pyridine derivatives produced isoxazolo[5,4-Z>]pyridines in moderate to good yield. In each case examined, the reaction produced only a single isomer, the structure of which was assigned by NMR spectra and confirmed by X-ray diffraction analysis of 102 (270). A study of the cycloaddition behavior of substituted pyridazin-3-ones with aromatic nitrile oxides was carried out (271). Nitrile oxides undergo position and regioselective 1,3-dipolar cycloaddition to the 4,5-double bond of pyridazinone to afford 3a,7a-diliydroisoxazolo 4,5-<7]pyridazin-4-ones, for example, 103. 

Iodoacetylene (prepared in situ from ethynylmagnesium bromide or tributyl (ethynyl)tin with iodine) was used as a dipolarophile in the 1,3-dipolar cycloaddition reactions with nitrile oxides to produce 2-(5-iodoisoxazol-3-yl)pyridine and 3-(4-fluorophenyl)-5-iodoisoxazole in good yield (70%-90%). Subsequently,... 

Cycloaddition reactions of alkenes DIO with nitrones were also catalyzed by Yb(OTf)3, by Sc(OTf)3 (795), by chiral 2,6-bis(4R-trialkylsiloxymethyl-oxazolinyl)pyridine/Ni(II) (pybox) (Fig. 2.43) (796a), and by chiral bis(2-oxazolinyl)xanthene (xabox) (Fig. 2.44) (796b). 

Finally, the reversibility of the nitrone/alkene [3+2] cycloaddition, mainly used to access the hexahydro-isoxa-zolo[2,3- ]pyridine ring system (see Section 11.10.3.7), can be used to functionalize these heterocycles. Accordingly, Holmes et al. found that a cycloreversion-cycloaddition reaction could be performed from 65 by simple heating in toluene at 190 °C. Under these conditions, the product of the reaction was found to be the exo-adduct 67 (Scheme 21) <2002J(P1)1494>. 

Other calculations were aimed at predicting the reactivity of some bicyclic 5-6 systems. For instance, the rare [l,4,2]diazaphospholo[4,5- ]pyridine 22 (Scheme 2) was examined for its reactivity (C=P bond) toward dienes in cycloaddition reactions <2005T10521>. The results of density functional theory (DFT) calculations were in good agreement with the experimentally obtained regioselectivity when using unsymmetrical dienes. 

Closure of the oxadiazole ring is still achieved through cycloaddition between pyridine iV-oxides and isocyanates, affording adducts such as 142 (Scheme 38) <1995T6451>. Nonaromatic imine fV-oxides exhibited similar reactivities, since azasugar-derived fV-oxides as a mixture of 143 and 144 underwent cycloaddition reactions in the presence of phenyl isocyanate or trichloroacetonitrile. Compounds 145 and 146 (Scheme 39) were obtained from the aldoxime W-oxide 143 two other regioisomeric heterocycles arose from the ketoxime derivative 144 <1996T4467>. 

In 1981 we published the first paper [22] on the synthesis of s-triazolo[4,3-a]pyridinium salts, 4, by the anodic oxidation of hydrazones 3 in the presence of pyridine (Scheme 5). In our working mechanistic scheme we proposed nitrilimine as the possible intermediate and pointed out that this reaction opens the door to a wide range of heterocyclic systems via anodic oxidation of aldehyde hydrazones through 1,3-dipolar cycloaddition reactions of the nitrilimine involved. 

---